Valid

GB/T 41082.2-2023Wheelchairs - Part 2: Typical values and recommended limits of dimensions, mass and manoeuvring space as determined in GB/Z 18029.5 (English PDF)

轮椅车 第2部分:按GB/Z 18029.5测得的尺寸、质量和操作空间的典型值和推荐限制值

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 41082.2-2023 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

January 1, 2023

Implementation date

January 1, 2023

Scope

GB/T 41082.2-2023 is the English-translated version of 轮椅车 第2部分:按GB/Z 18029.5测得的尺寸、质量和操作空间的典型值和推荐限制值.

GB/T 41082.2-2023 is the Chinese standard "Wheelchairs - Part 2: Typical values and recommended limits of dimensions, mass and manoeuvring space as determined in GB/Z 18029.5".

Found what you need?

Document preview — GB/T 41082.2-2023

National Standard of the People's Republic of China

ICS
11.180

Contents

  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Wheelchair groups
  • 4.1 General
  • 4.2 Wheelchairs with handrims
  • 4.3 Electrically powered wheelchairs of class A
  • 4.4 Electrically powered wheelchairs of class B
  • 4.5 Electrically powered wheelchairs of class C
  • 4.6 Electrically powered wheelchairs (scooter design)
  • 5 Typical values and recommended limits for required measurements
  • 5.1 General
  • 5.2 Full overall length
  • 5.2.1 Occupant mass group I
  • 5.2.2 Occupant mass group II and III
  • 5.3 Overall width
  • 5.3.1 Occupant mass group I

1 Foreword

GB/T 41082.2-2023 was issued by State Administration for Market Regulation; Standardization Administration of the PRC on 27 November 2023.

The GB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 15 pages in English translation.

2 Scope Preview

This document lists the typical values and recommended limits of the dimensions obtained from measurements taken in accordance with ISO 7176-5. This document lists the typical values and recommended limits of the important wheelchair dimensions (ready for occupation and folded or dismantled), space for pivoting or reversing between limiting walls and some dimensions worthwhile to estimate usability of the wheelchair as well as determination of the mass of the wheelchair. It is intended for use of prescribers, clinicians, wheelchair occupants or manufacturers. This document lists the typical values and recommended limits of the dimensions when the wheelchair is occupied and some operating areas when performing special tasks encountered in every day’s life. This document lists the typical values and recommended limits of the technical dimensions critical to the performance of the wheelchair. This document applies to manual wheelchairs and electrically powered wheelchairs (including scooters).

GB/T 41082.2-2023 falls under ICS 11.180, in the field of health care technology.

This catalogue holds 845 other GB/T standards in that field.

In this catalogue, GB/T standards carry edition years from 1963 to 2026.

3 Normative references

ISO 7176 — -5 Wheelchairs - Part 5: Determination of dimensions, mass and manoeuvring space

4 About this standard

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

English translation: about 15 pages (approximate)

5 Classification and status

International classification (ICS): 11.180

Prefix GB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

How to Download GB/T 41082.2-2023

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 41082.2-2023

$515.00