GB/T 40932-2021Snowboard step-in bindings. Requirements and test methods (English PDF)
滑雪单板踏入式固定器 要求和试验方法
This is a limited preview
Buy now to download the full PDF (22 pages)
Need quotation for your management?
Get a formal quotation for GB/T 40932-2021 in 30 minutes.
Issued by
State Administration for Market Regulation, China National Standardization Administration
Level / Type
National · Recommended
Issue date
November 26, 2021
Implementation date
November 26, 2021
Scope
GB/T 40932-2021 is the English-translated version of 滑雪单板踏入式固定器 要求和试验方法.
GB/T 40932-2021 — This document specifies the basic requirements and test methods for ski snowboard step-in holders (see 3.1). This document applies to step-in ski snowboard holders for adults and children.
This type of fixing system adopts the principle of mechanical interlock, and the mechanism of system interlock will correspond to a specific manufacturer. For compatibility between different systems The capacitance is not preset, so any potential risk of the connection between the ski boot and the holder needs to be tested.
See GB/T 40940-2021 for ski snowboard holder. See GB/T 40925-2021 for the strap holder for ski snowboard soft boots.
Found what you need?
Document preview — GB/T 40932-2021
National Standard of the People's Republic of China
- Classification
- Y 55
Issued by: State Administration for Market Regulation, China National Standardization Administration
Contents
- 1 Scope1
- 2 Normative references1
- 3 Terms and definitions1
- 4 Parameters2
- 5 Technical requirements2
- 5.1 Function2
- 5.2 Fixed strap and fixed strap installation point2
- 5.3 Snow cover3
- 5.4 Fixing screws3
- 6 Test method3
- 6.1 General3
- 6.2 Test device3
- 6.3 Sampling and test conditions4
- 6.4 Loading rate4
- 6.5 Measurement accuracy5
- 6.6 Test under icing conditions5
- 6.7 Mechanical test5
- 7 Logo7
- 8 Installation instructions7
- 9 Instructions for use7
- Reference8
Foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules of Standardization Documents"
Drafting.
The translation method used in this document is equivalent to ISO 15344.2005 "Requirements and Test Methods for Ski Snowboard Step-In Fixtures".
The Chinese documents that have consistent correspondence with the normatively cited international documents in this document are as follows.
---GB/T 40923.1-2021 Ski snowboard holder installation area Part 1.Requirements and tests for ski snowboard without inserts
Method (ISO 10958-1.1998, MOD);
---GB/T 40923.2-2021 Ski snowboard holder installation area Part 2.Requirements and tests for snowboard with inserts
Method (ISO 10958-2.2015, IDT).
This document has made the following minimal editorial changes.
--- Change "+/-66Nm+/-5%" in 6.7.4 to "+/-(66+/-3.3)N.m".
1 Scope
This document specifies the basic requirements and test methods for ski snowboard step-in holders (see 3.1).
This document applies to step-in ski snowboard holders for adults and children.
This type of fixing system adopts the principle of mechanical interlock, and the mechanism of system interlock will correspond to a specific manufacturer. For compatibility between different systems
The capacitance is not preset, so any potential risk of the connection between the ski boot and the holder needs to be tested.
See GB/T 40940-2021 for ski snowboard holder.
See GB/T 40925-2021 for the strap holder for ski snowboard soft boots.
2 Normative references
The content of the following documents constitutes an indispensable clause of this document through normative references in the text. Among them, dated quotations
Only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to
This document.
ISO 554.1976 Standard atmospheres for conditioning and/or
testing-Specifications)
ISO 6004.1991 Requirements for screws for alpine ski bindings (Alpineskis-Skibindingscrews-Re-
quirements)
ISO 9838 Alpine and Touring Ski-bindings-Test
solesforski-bindingtests)
ISO 10958-1 Ski snowboard holder installation area Part 1.Requirements and test methods for non-insert ski snowboards (Snow-
boards-Bindingmountingarea-Part 1.Requirementsandtestmethodsforsnowboardswithoutin-
serts)
ISO 10958-2 Ski snowboard holder installation area Part 2.Requirements and test methods for ski snowboards with inserts (Snow-
boards-Bindingmountingarea-Part 2.Requirementsandtestmethodsforsnowboardswithin-
serts)
3 Terms and definitions
The following terms and definitions apply to this document.
3.1
Snowboard step-inbinding-bootsystem
An interlocking system that connects the snowboard and the snowboard through the step-in interface.
3.2
Type A (adult) snowboard step-in binding type A
Suitable for fixing devices used by adults weighing more than 45kg.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 22 pages — is available in the English PDF.
Referenced standards
Normative references
ISO 554.1976 · ISO 6004.1991 · ISO 9838 · ISO 10958
How to Download GB/T 40932-2021
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 40932-2021
$210.00