GB/T 40907-2021Methods for the determination of prohibited substances in furniture products and related materials—2,4-diaminotoluene and 4,4'-methylenedianiline (English PDF)
家具产品及其材料中禁限用物质测定方法 2,4-二氨基甲苯、4,4’-二氨基二苯甲烷
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 40907-2021 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
October 11, 2021
Implementation date
May 1, 2022
Scope
GB/T 40907-2021 is the English-translated version of 家具产品及其材料中禁限用物质测定方法 2,4-二氨基甲苯、4,4’-二氨基二苯甲烷.
GB/T 40907-2021 is the Chinese national method for determining two prohibited aromatic amines, 2,4-diaminotoluene and 4,4'-methylenedianiline (4,4'-diaminodiphenylmethane), in furniture products and their materials.
Residues are leached with a hot aqueous acetic acid solution; after cooling, the amines are transferred into dichloromethane by liquid-liquid extraction in a weakly alkaline medium, concentrated and measured by gas chromatography-mass spectrometry with external standard quantification.
The document lists the reagents, including dichloromethane, 1% acetic acid and 500 g/L sodium hydroxide solutions and the two reference substances, and the preparation of two-component mixed standard working solutions from 0.5 mg/L to 5 mg/L. It was issued on 11 October 2021 and has applied since 1 May 2022.
Found what you need?
Document preview — GB/T 40907-2021
National Standard of the People's Republic of China
- ICS
- 97.140
- Classification
- Y 80
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Principle
- 5 Reagents or materials
Foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules of Standardization Documents" Drafting.
1 Scope
This document describes the determination method of 2,4-diaminotoluene and 4,4'-diaminodiphenylmethane in furniture products and materials.
This document is applicable to the determination of 2,4-diaminotoluene and 4,4'-diaminodiphenylmethane in furniture products and materials.
2 Normative references
The contents of the following documents constitute the indispensable clauses of this document through normative references in the text. Among them, dated quotations Only the version corresponding to that date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to this document.
GB/T 6682 Analytical laboratory water specifications and test methods
3 Terms and definitions
There are no terms and definitions that need to be defined in this document.
4 Principle
Leach the residual 2,4-diaminotoluene and 4,4'-diaminodiphenylmethane in the furniture products and their materials with hot acetic acid aqueous solution to cool Then, in a weakly alkaline environment, through liquid-liquid extraction, 2,4-diaminotoluene and 4,4'-diaminodiphenylmethane are transferred to dichloromethane, After concentration, it is determined by gas chromatography-mass spectrometer, and quantified by external standard method. Its signal response value is within a certain range with 2,4-diamine The content of methyl toluene and 4,4'-diaminodiphenylmethane is directly proportional.
5 Reagents or materials
Unless otherwise specified, only use reagents confirmed to be analytically pure and the tertiary water specified in GB/T 6682 in the analysis.
5.1 Dichloromethane. chromatographically pure.
5.2 Acetic acid solution (1%). Weigh 10g of glacial acetic acid and dissolve in water, and dilute to 1000mL.
5.3 Sodium hydroxide solution (500g/L). Weigh 50g of sodium hydroxide and dissolve in water and dilute to 100mL.
5.4 2,4-Diaminotoluene standard material (CAS number. 95-80-7). purity >=99%; or standard solution of known concentration.
5.5 4,4'-Diaminodiphenylmethane standard material (CAS number. 101-77-9). purity >=99%; or standard solution of known concentration.
5.6 Standard working solution. Use methylene chloride (5.1) to combine 2,4-diaminotoluene standard substance (5.4) and 4,4'-diaminodiphenylmethane standard substance Quality (5.5) is configured as a two-component mixed standard work with a mass concentration of 0.5mg/L, 1.5mg/L, 2.5mg/L, 3.5mg/L, 5mg/L Solution.
Note: The mass concentration of each standard substance in the two-component mixed standard working solution is 0.5mg/L, 1.5mg/L, 2.5mg/L, 3.5mg/L, 5mg/L.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
Similar standards
How to Download GB/T 40907-2021
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 6682-1992 — Water for analytical laboratory use--Specification and test methods
GB/T 6682-2008 — Water for analytical laboratory use - Specification and test methods
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 40907-2021
$135.00