Valid

GB/T 4084-2018Self-stressing concrete pipes (English PDF)

自应力混凝土管

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 4084-2018 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

February 6, 2018

Implementation date

January 1, 2019

Scope

GB/T 4084-2018 is the English-translated version of 自应力混凝土管.

GB/T 4084-2018 is the Chinese national standard for self-stressing concrete pipes (code SCP), in which the expansion of self-stressing cement puts the concrete into prestress.

It applies to spigot-and-socket pipes with a nominal diameter from 100 mm to 800 mm and a working pressure from 0.2 MPa to 0.8 MPa, sealed with a rubber ring of circular section, and used for water supply or drainage.

It covers terms and definitions, pressure grades and marking, raw materials such as cement, aggregates, admixtures, expansion agents and cold-drawn steel wire, technical requirements, test methods based on GB/T 15345, inspection rules, and marking, stacking, transport and delivery.

It replaces GB 4084-1999, was issued on 6 February 2018 and has applied since 1 January 2019.

Found what you need?

Document preview — GB/T 4084-2018

National Standard of the People's Republic of China

ICS
91.100.30
Classification
Q 14
Replacing
GB 4084-1999

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Levels and markers

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009.

This standard replaces GB/T 4084-1999 "self-stress concrete pipe." Compared with GB/T 4084-1999, except for editorial changes The main technical changes are as follows.

--- Modify the standard name;

--- Modify the scope of the standard (see Chapter 1, 1999 edition of Chapter 1);

--- Modify the terms and definitions (see Chapter 3, 1999 edition Chapter 3);

--- Modify the classification (see Chapter 4, 1999 edition Chapter 4);

--- Modify the raw materials (see Chapter 5, 1999 edition of Chapter 5);

--- Modify the technical requirements, canceled the "product quality rating" (see Chapter 6, 1999 edition of Chapter 6);

--- Modify the test method, using GB/T 15345 (see Chapter 7, 1999 edition Chapter 7);

--- Modify the inspection rules in the "group" (see Chapter 8, 1999 edition Chapter 8);

--- Canceled Appendix B (see the 1999 edition of Appendix B).

1 Scope

This standard specifies the self-stress concrete pipe (code-named SCP, referred to as "pipe") product terms and definitions, grades and marks, raw materials, Technical requirements, test methods, inspection rules, signs, stacking, transport and factory and so on.

This standard applies to the nominal diameter of 100mm ~ 800mm, the working pressure of 0.2MPa ~ 0.8MPa, the connector with a circular cut Rubber ring sealed socket self-stress concrete water or drainage pipe.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version applies to this document. For undated references, the latest edition (including all amendments) applies to this document.

GB 175 Universal portland cement

GB 8076 concrete admixture

GB/T 14684 construction sand

GB/T 14685 building with pebbles, gravel

GB/T 15345 concrete pipes test methods

GB/T 17671 cement mortar strength test method (ISO method)

GB/T 20472 sulphoaluminate cement

GB/T 23439 concrete expansion agent

JC/T 453 Self-stressing cement physical test methods

Cold drawn low carbon steel wire for JC/T 540 concrete products

JG/T 245 Shaking table for concrete test

JGJ63 concrete water standards

3 Terms and definitions

The following terms and definitions apply to this document.

3.1 Self-stressing concrete pipe

The use of self-stressing cement expansion force to produce prestressed concrete pipe.

4 Levels and markers

4.1 Pressure rating

The pipe is divided into working pressure -2, working pressure -4, working pressure -5, working pressure -6, working pressure -8 five grades, the pressure indicators of each grade see Table 1. […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

Editions of GB/T 4084

EditionTitleRevisionStatus
GB/T 4084-2018Self-stressing concrete pipescurrent editionCurrent
GB 4084-1999Self-stressing concrete pipesprevious editionSuperseded

This page sells the current edition, GB/T 4084-2018. Earlier editions are listed for reference only.

How to Download GB/T 4084-2018

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Instant delivery (0–9 sec)

    Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Instant delivery (0–9 sec)
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 4084-2018

$205.00