GB/T 40798-2021Chemical analysis method of ion-adsorption rare earth ore—Determination of total rare earth contents—Inductively coupled plasma mass spectrometry (English PDF)
离子型稀土原矿化学分析方法 稀土总量的测定 电感耦合等离子体质谱法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 40798-2021 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
October 11, 2021
Implementation date
May 1, 2022
Scope
GB/T 40798-2021 is the English-translated version of 离子型稀土原矿化学分析方法 稀土总量的测定 电感耦合等离子体质谱法.
GB/T 40798-2021 specifies an inductively coupled plasma mass spectrometry method for determining the total rare earth content of ion-adsorption rare earth ore, over a mass fraction range of 0.010% to 0.50%.
The sample is decomposed with hydrofluoric and perchloric acids, heated until the perchloric acid fumes are driven off and dissolved in nitric acid.
In a dilute nitric acid medium, with argon plasma as the ionization source, the mass fractions of fifteen rare earth elements are measured and added together to give the total, with an internal standard used for correction.
The document lists the reagents, from the acids and hydrogen peroxide to the standard stock solutions, beginning with those prepared from lanthanum oxide and cerium oxide. It was issued on 11 October 2021 and has applied since 1 May 2022.
Found what you need?
Document preview — GB/T 40798-2021
National Standard of the People's Republic of China
- ICS
- 77.120.99
- Classification
- H 14
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Principle
- 5 Reagents and materials
Foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules of Standardization Documents" Drafting.
1 Scope
This document specifies the method for determining the total amount of rare earths in ionic rare earth ore.
This document is applicable to the determination of the total amount of rare earths in ionic rare earth ore. Measuring range (mass fraction). 0.010%~0.50%.
2 Normative references
The content of the following documents constitutes an indispensable clause of this document through normative references in the text. Among them, dated quotations Only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to this document.
GB/T 8170 Numerical rounding rules and the expression and determination of limit values
3 Terms and definitions
There are no terms and definitions that need to be defined in this document.
4 Principle
The sample is decomposed with hydrofluoric acid and perchloric acid, heated until the perchloric acid smoke is exhausted, and dissolved completely with nitric acid. In dilute nitric acid medium, with argon plasma The body is the ionization source, and the mass fraction of fifteen rare earth elements is determined by mass spectrometry. The sum of each mass fraction is the total amount of rare earth elements. Within the measurement Standard method for correction.
5 Reagents and materials
Unless otherwise specified, only reagents and distilled water or deionized water or equivalent purity water are used in the analysis.
5.1 Hydrofluoric acid (rho=1.15 g/mL).
5.2 Perchloric acid (rho=1.76 g/mL).
5.3 Nitric acid (rho=1.42 g/mL).
5.4 Hydrogen peroxide (rho=1.19 g/mL).
5.5 Nitric acid (1+1).
5.6 Lanthanum standard storage solution. weigh 0.1000g of lanthanum oxide that has been burned at 950°C for 1h [w(REO) >99.5%, w(La2O3/ REO) >99.999%), put in a 100mL beaker, add 10mL of nitric acid (5.5), heat at low temperature to complete dissolution, remove and cool, the solution Transfer to a 100mL volumetric flask, dilute to the mark with water, and mix well. 1mL of this solution contains 1000µg of lanthanum oxide.
5.7 Cerium standard storage solution. Weigh 0.1000g of cerium oxide that has been burned at 950°C for 1 hour [w(REO) >99.5%,w(CeO2/REO) > 99.999%], placed in a 100mL beaker, add 10mL nitric acid (5.5), 2mL hydrogen peroxide (5.4), heat at low temperature to completely dissolve, remove […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 40798-2021
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 8170-1987 — Rules for rounding off of numerical values
GB/T 8170-2008 — Rules of rounding off for numerical values & expression and judgement of limiting values
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 40798-2021
$135.00