GB/T 40646-2021Technical requirements for broadband customer networking based on public telecommunication network - Optical camera communications (English PDF)
基于公用电信网的宽带客户网络联网技术要求 可见光成像通信
This is a limited preview
Buy now to download the full PDF (58 pages)
Need quotation for your management?
Get a formal quotation for GB/T 40646-2021 in 30 minutes.
Issued by
State Administration for Market Regulation, China National Standardization Administration
Level / Type
National · Recommended
Issue date
October 11, 2021
Implementation date
May 1, 2022
Scope
GB/T 40646-2021 is the English-translated version of 基于公用电信网的宽带客户网络联网技术要求 可见光成像通信.
GB/T 40646-2021 is the Chinese national standard of technical requirements for optical camera communication in broadband customer networks built on a public telecommunication network, a non-equivalent redraft of ITU-T G.9992.
It specifies the system architecture and the reference model of an optical camera communication transceiver, its physical layer and its data link layer: the architecture and topology, the reference model, the low complexity and the standard profile, single-input single-output transmission, multiple-input multiple-output transmission based on unipolar pulse width and pulse position modulation, the control signal, the frame format and the addressing strategy, with a normative annex on bit ordering.
It applies to such equipment in a broadband customer network on a public telecommunication network, and a private network may refer to it. It was issued on 11 October 2021 and has applied since 1 May 2022.
Found what you need?
Document preview — GB/T 40646-2021
National Standard of the People's Republic of China
- ICS
- 33.040.50
- Classification
- M 42
Issued by: State Administration for Market Regulation, China National Standardization Administration
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Abbreviations
- 5 System architecture and reference model
- 5.1 System Architecture and Topology
- 5.2 Reference model
- 6 Configuration file
- 6.1 Overview
- 6.2 Low complexity profile
- 6.3 Standard configuration file
- 7 Physical layer specification
- 7.1 SISO transmission
- 7.2 MIMO transmission based on UPWM
- 7.3 MIMO transmission based on UPPM
- 7.4 Control signal
- 8 Data Link Layer Specification
- 8.1 Function model and frame format
- 8.2 Addressing Strategies
- Appendix A (Normative Appendix) Bit Ordering Convention
- Appendix B (informative appendix) Application protocol convergence sublayer
- B.1 Overview
- B.2 Ethernet APC (EAPC)
- B.3 Other types of APC
- Reference
Foreword
This standard is one of a series of broadband customer network standards based on public telecommunication networks. This series of standards consists of the following standards.
---Broadband customer network networking technology based on public telecommunication network requires communication and integration of high-speed visible light communication (GB/T 38832-2020);
---Broadband customer network networking technology based on public telecommunication networks requires power line networking (GB/T 33854-2017);
---Broadband customer network networking technology based on public telecommunications networks requires wired networking of common media;
---Broadband customer network networking technology based on public telecommunication networks requires networking based on coaxial cables.
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard uses the redrafting method to refer to ITU-T G.9992 "Indoor optical camera communication transceiver system architecture, physical layer and data According to the "Link Layer Specification", the degree of consistency with ITU-T G.9992 is non-equivalent.
1 Scope
This standard specifies the system architecture and reference model, physical layer (PHY) and data link layer of a visible light imaging communication (OCC) transceiver (DLL) specification.
This standard applies to OCC equipment under the broadband customer network environment based on the public telecommunications network, and the private telecommunications network can also be used as a reference.
2 Normative references
The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this document. For undated reference documents, the latest version (including all amendments) is applicable to this document.
IEEE802.3-2008 Information Technology Special Requirements Part 3: Carrier Sense Multiple Access with Collision Detection (CSMA/ CD) method and physical layer specification [Standardforinformationtechnology-Specificrequirements-Part 3: Carrier sensemultipleaccesswithcolisiondetection(CSMA/CD)accessmethodandphysicallayerspecifica-tions]
3 Terms and definitions
The following terms and definitions apply to this document.
3.1 Alien domain
Any non-visible light imaging communication network node group connected to the same medium or working in a very close range.
Note: The bridging function to the external domain and the coordination function with the external domain in order to avoid mutual interference are not within the scope of this standard.
3.2 Domain
A visible light imaging communication network, including the domain master node and all those nodes registered to the same domain master node.
Note: In the scope of this standard, the use of the term "domain" without a qualifier refers to the "visible light imaging communication network domain". Other qualifiers can be used for "domain".
3.3 Domain management node domainmaster; DM
A node that supports the domain master function of managing (coordinating) all other nodes in the same domain (that is, allocating bandwidth resources and managing priority). area Only one active domain master node is allowed in, and all nodes in the domain are managed (coordinated) by a single domain master node.
3.4 Endpoint node
Distinguish between domain master node function and non-domain master node function, or used to distinguish one-way broadcast node function and non-one-way broadcast node function.
3.5 Global management node globalmaster; GM
Provides coordination functions between different domains (e.g., communication resources, the strategy of the domain master), and can also be transmitted by a remote management system (e.g., Broadband Forum CPEWAN Management Protocol) initiated management functions to support broadband access.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 58 pages — is available in the English PDF.
Referenced standards
Normative references
IEEE 802.3-2008
How to Download GB/T 40646-2021
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 40646-2021
$710.00