GB/T 40456-2021Detection and identification of Vryburgia amaryllidis (Bouché, 1837) (English PDF)
石蒜弗粉蚧检疫鉴定方法
This is a limited preview
Buy now to download the full PDF (17 pages)
Need quotation for your management?
Get a formal quotation for GB/T 40456-2021 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
August 20, 2021
Implementation date
March 1, 2022
Scope
GB/T 40456-2021 is the English-translated version of 石蒜弗粉蚧检疫鉴定方法.
GB/T 40456-2021 sets out how to detect and identify Vryburgia amaryllidis (Bouché, 1837), a mealy scale insect, in plant quarantine work. It covers both the on-site quarantine inspection and the laboratory identification of the insect.
To support identification it defines the body structures that the examiner looks at under the microscope: the dorsal ostioles, the cerarii along the back edge of the body, the ventral circulus, the multilocular disc pores near the vulva, the anal ring with its pores and six setae, and the tubular ducts.
The document was prepared under the national plant quarantine technical committee and is meant for quarantine and inspection laboratories. It has no normative references. It was issued on 20 August 2021 and has applied since 1 March 2022.
Found what you need?
Document preview — GB/T 40456-2021
National Standard of the People's Republic of China
- ICS
- 65.020.01
- Classification
- B 16
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
Foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules of Standardization Documents" Drafting.
1 Scope
This document describes the method of on-site quarantine and laboratory identification of the Lycoris lycocidae Vryburgia amaryllidis (Bouché, 1837).
This document is applicable to the quarantine and identification of Vryburgia amaryllidis (Bouché, 1837).
2 Normative references
There are no normative references in this document.
3 Terms and definitions
The following terms and definitions apply to this document.
3.1 Dorsal hole
It is a lip-like transverse fissure structure appearing in pairs on the back of the worm.
Note: Also known as back split. Usually there are 2 pairs, a few species have only 1 pair. Divided into front and back holes. The front dorsal hole is born on the front chest back panel, and the back hole is born on the 6th abdominal segment dorsal board.
3.2 Piercing group
A special wax secretion structure of mealy scale insects, often distributed on the back edge of the insect body.
Note: The full name is the dorsal edge puncture group. Use the "C number" form from the head to the abdomen. C1~C4 represent 4 pairs of heads (forehead pair, antenna pair (also known as front pair), eye pair Yes, behind the eyes], C5~C10 respectively represent 6 pairs of chest (2 pairs for each thoracic segment), C11~C18 respectively represent 8 pairs of abdomen (1 pair for each abdominal segment). Few species There is also a distribution in the middle part of the back of the class, which is called the dorsal puncture group. Each puncture group generally has 1 pair (a few or several) cone-shaped thorns, gathered in three grids near the cone thorns Glands or a small number of five-dimensional glands, as well as several attached hairs.
3.3 Belly button
Located between the 3rd and 4th abdominal segments on the ventral surface of the worm body, it is often bounded by the narrow and hardened frame of local keratinization, and the two sides are often recessed with internode folds in the middle across.
Note: Also known as gastric fissure. The number and size of belly buttons vary greatly among different species of scale insects.
3.4 Multilocular disc pore
A wax-secreting structure with a round hole with a central grid and multiple grids around (6 to 12 grids) generally distributed near the vulva.
3.5 Anal ring
The opening of the anus. A ring structure located at the end of the back with rows of ring holes and 6 ring hairs.
3.6 Tubular duct
The tubular wax secretion structure is divided into collar tube and fungus gland.
Note: The collar tube (oral-colartubularduct) is cylindrical, with different diameters and lengths, and the mouth of the tube is surrounded by a narrow hardened ring. […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 17 pages — is available in the English PDF.
Similar standards
How to Download GB/T 40456-2021
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 40456-2021
$300.00