Valid

GB/T 40440-2021Plastics - Extruded sheets of impact-modified acrylonitrile-styrene copolymers(ABS, AEPDS and ASA) - Requirements and test methods (English PDF)

塑料制品 抗冲击改性丙烯腈-苯乙烯共聚物(ABS、AEPDS和ASA)挤出板材 要求和试验方法

Preview PDF

This is a limited preview

Buy now to download the full PDF (24 pages)

Need quotation for your management?

Get a formal quotation for GB/T 40440-2021 in 30 minutes.

Issued by

State Administration for Market Regulation, China National Standardization Administration

Level / Type

National · Recommended

Issue date

August 20, 2021

Implementation date

March 1, 2022

Scope

GB/T 40440-2021 is the English-translated version of 塑料制品 抗冲击改性丙烯腈-苯乙烯共聚物(ABS、AEPDS和ASA)挤出板材 要求和试验方法.

GB/T 40440-2021 is the Chinese standard "Plastics - Extruded sheets of impact-modified acrylonitrile-styrene copolymers(ABS, AEPDS and ASA) - Requirements and test methods".

Its scope clause reads: This standard specifies the impact-resistant modified acrylonitrile-styrene copolymer material without filling and reinforcing materials. acrylonitrile-butadiene-styrene Olefin copolymer (ABS), acrylonitrile-ethylene-propylene-styrene copolymer (AEPDS) (commonly called AES) and acrylonitrile-styrene-acrylic acid Requirements and test methods for ester (ASA) extruded sheets.

This standard only applies to ABS, AEPDS and ASA plates with a thickness of 0.25mm~20.0mm, and also applies to coiled materials. Sheet. Its clauses include balindentationmethod).

Found what you need?

Document preview — GB/T 40440-2021

National Standard of the People's Republic of China

Classification
G 33

Issued by: State Administration for Market Regulation, China National Standardization Administration

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 1.Balindentationmethod)

1 Scope

This standard specifies the impact-resistant modified acrylonitrile-styrene copolymer material without filling and reinforcing materials. acrylonitrile-butadiene-styrene

Olefin copolymer (ABS), acrylonitrile-ethylene-propylene-styrene copolymer (AEPDS) (commonly called AES) and acrylonitrile-styrene-acrylic acid

Requirements and test methods for ester (ASA) extruded sheets.

This standard only applies to ABS, AEPDS and ASA plates with a thickness of 0.25mm~20.0mm, and also applies to coiled materials.

Sheet.

2 Normative references

The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this article

Pieces. For undated reference documents, the latest version (including all amendments) is applicable to this document.

ISO 179-1 Determination of impact properties of plastic simply supported beams Part 1.Non-instrumented impact test (Plastics-

DeterminationofCharpyimpactproperties-Part 1.Non-instrumentedimpacttest)

ISO 179-2 Determination of impact properties of plastic simply supported beams Part 2.Instrumented impact test (Plastics-Determination ofCharpyimpactproperties-Part 2.Instrumentedimpacttest)

ISO 291 Standard environment for condition adjustment and testing of plastic specimens (Plastics-Standardatmospheresfor conditioningandtesting)

ISO 306.20041) Determination of Vicat Softening Temperature (VST) of Plastic Thermoplastics [Plastics-Thermoplasticma- terials-DeterminationofVicatsofteningtemperature(VST)]

ISO 527-2 Determination of tensile properties of plastics Part 2.Test conditions for molding and extrusion plastics (Plastics-Determi- nationoftensileproperties-Part 2.Testconditionsformouldingandextrusionplastics)

ISO 1183 Plastic Non-foam Plastic Density Determination (All Parts) (Plastics-Methodsfordeterminingthe densityofnon-celularplastics,alparts)

ISO 2039-1 Plastics Hardness Determination Part 1.Ball Indentation Method (Plastics-Determination of Hardness-Part

1 Balindentationmethod)

ISO 2580-12) Plastic Acrylonitrile-Butadiene-Styrene (ABS) Molding and Extrusion Materials Part 1.Naming System and Classification

Foundation (Plastics-Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials-Part 1.Des- ignationsystemandbasisforspecifications)

1) ISO 306.2004 is obsolete and replaced by ISO 306.2013.

2) ISO 2580-1 has been obsolete and is part 1 of ISO 19062-1 Plastic Acrylonitrile Butadiene Styrene Copolymer (ABS) Molding and Extrusion Materials

Points. naming system and basic specifications [Plastics-Acrylonitrile-butadiene-styrene(ABS) mouldingandextrusionmaterials-

Part 1.Designationsystemandbasisforspecifications] instead.

ISO 2818 Plastics-Preparation of test specifications by machining […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 24 pages — is available in the English PDF.

Referenced standards

Normative references

ISO 179 · ISO 291 · ISO 306.20041 · ISO 527 · ISO 1183 · ISO 2039

How to Download GB/T 40440-2021

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
24 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 40440-2021

$210.00