Valid

GB/T 40414-2021Determination of thickness for floating-floor thermal insulating products (English PDF)

浮筑地面用绝热制品厚度的测量

Preview PDF

This is a limited preview

Buy now to download the full PDF (17 pages)

Need quotation for your management?

Get a formal quotation for GB/T 40414-2021 in 30 minutes.

Issued by

State Administration for Market Regulation, China National Standardization Administration

Level / Type

National · Recommended

Issue date

August 20, 2021

Implementation date

March 1, 2022

Scope

GB/T 40414-2021 is the English-translated version of 浮筑地面用绝热制品厚度的测量.

GB/T 40414-2021 — This document specifies the equipment and procedures for thickness measurement of thermal insulation products used for impact sound insulation in floating ground systems.

Found what you need?

Document preview — GB/T 40414-2021

National Standard of the People's Republic of China

Classification
Q 25

Issued by: State Administration for Market Regulation, China National Standardization Administration

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Principle

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules of Standardization Documents"

Drafting.

This document is equivalent to ISO 29770.2008 "Measurement of Thickness of Thermal Insulation Products for Floating Floors for Building Thermal Insulation Products".

The following editorial changes have been made to this document.

--- In order to coordinate with the existing standards, the standard name is changed to "Measurement of Thickness of Thermal Insulation Products for Floating Floors."

This document was proposed by the China Building Materials Federation.

This document is under the jurisdiction of the National Thermal Insulation Material Standardization Technical Committee (SAC/TC191).

Drafting organizations of this document. Wuxi Gemaisi New Material Technology Co., Ltd., Shenzhen Jintai Testing Technology Co., Ltd., Suzhou Long30 Electromechanical

Engineering Co., Ltd., Suzhou China Design and Construction Co., Ltd., Suzhou Hongyuan Purification Technology Co., Ltd., Suzhou Longzhi System Engineering Co., Ltd.,

Pujia (Changzhou) Environmental Technology Co., Ltd., Suzhou Lanteng Decoration Materials Co., Ltd., Shanghai Jianke Inspection Co., Ltd., Southeast University Construction Design

Engineering Research Institute Co., Ltd., Jiangnan University, Zhejiang University, Zhejiang University Architectural Design and Research Institute Co., Ltd., Yancheng Institute of Technology, China University of Mining and Technology

Engineering Consulting and Research Institute (Jiangsu) Co., Ltd., Jiangsu First Industrial Design Institute Co., Ltd., Wudong Shui Ni components, Jianghai District, Jiangmen City

Factory, Jiangsu Hongjian Engineering Construction Consulting Co., Ltd.

1 Scope

This document specifies the equipment and procedures for thickness measurement of thermal insulation products used for impact sound insulation in floating ground systems.

2 Normative references

The contents of the following documents constitute the indispensable clauses of this document through normative references in the text. Among them, dated quotations

Only the version corresponding to that date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to

This document.

ISO 29768 Measurement of Linear Dimensions of Thermal Insulation Products for Building

application-Determinationoflineardimensionsoftestspecimens)

3 Terms and definitions

The following terms and definitions apply to this document.

3.1

Thickness

dL

The thickness of the product under a load of 250Pa, expressed in dL.

3.2

Thickness

dF

The thickness of the product under a load of 2kPa, expressed in dF.

3.3

Thickness

dB

The thickness of the product after holding it under a load of 50kPa for a specific time, and then returning to a load of 2kPa for a specific time, expressed in dB.

4 Principle

Measure the distance between the rigid plate placed on the bottom surface of the test piece and the rigid plate that applies a specific load to the upper surface of the test piece. This distance is

The thickness of the product.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 17 pages — is available in the English PDF.

Referenced standards

Normative references

ISO 29768

How to Download GB/T 40414-2021

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
17 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 40414-2021

$150.00