GB/T 40369-2021General rules for determination of immunochromatographic test strip (English PDF)
免疫层析试纸条检测通则
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 40369-2021 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
August 20, 2021
Implementation date
March 1, 2022
Scope
GB/T 40369-2021 is the English-translated version of 免疫层析试纸条检测通则.
GB/T 40369-2021 sets out general rules for testing immunochromatographic test strips. It describes the general requirements that apply before testing, the testing process itself and the content of the result report.
The standard defines the performance terms used to judge a strip: detection limit, sensitivity, specificity, false negative rate and false positive rate, each tied to results obtained on positive and negative samples at the detection limit level.
Its general requirements ask for test strip products to come with product instructions or equivalent guidance documents, and for the biosafety management of the testing laboratory to meet the relevant requirements of GB 19489.
It applies to laboratories that test immunochromatographic strips. It was issued on 20 August 2021 and has applied since 1 March 2022.
Found what you need?
Document preview — GB/T 40369-2021
National Standard of the People's Republic of China
- ICS
- 07.080
- Classification
- A 40
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 General requirements
Foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules of Standardization Documents" Drafting.
1 Scope
This document describes the general requirements, testing process and result report of immunochromatographic test strips.
This document is applicable to the detection of immunochromatographic test strips.
2 Normative references
The contents of the following documents constitute the indispensable clauses of this document through normative references in the text. Among them, dated quotations Only the version corresponding to that date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to this document.
GB 19489 Laboratory Biosafety General Requirements
3 Terms and definitions
The following terms and definitions apply to this document.
3.1 Detection limit
At a given confidence level, the lowest concentration or content of the target analyte that can be reliably distinguished between a positive sample and a negative sample.
3.2 Sensitivity
At the detection limit level of the method under the test conditions, the number of positive samples with positive results as a percentage of the total number of positive samples.
3.3 Specificity
When the method is at the detection limit level under the test conditions, the number of negative samples with negative results is the percentage of the total number of negative samples.
3.4 False negative rate
When the method is at the detection limit level under the test conditions, the percentage of negative results detected in positive samples.
3.5 False positive rate
When the method is at the detection limit level under the test conditions, the percentage of positive results detected in negative samples.
4 General requirements
4.1 Product
Test strip products should be accompanied by product instructions or equivalent guidance documents.
4.2 Laboratory
The biosafety management of the laboratory shall meet the corresponding requirements in GB 19489.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
Similar standards
How to Download GB/T 40369-2021
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 19489-2004 — Laboratories - General requirements for biosafety
GB 19489-2008 — Laboratories - General requirements for biosafety
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 40369-2021
$90.00