Valid

GB/T 39744-2021General requirements of mechanical product electronic manual based on three-dimensional model (English PDF)

基于三维模型的机械产品电子手册编制通用要求

Preview PDF

This is a limited preview

Buy now to download the full PDF (22 pages)

Need quotation for your management?

Get a formal quotation for GB/T 39744-2021 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

March 9, 2021

Implementation date

October 1, 2021

Scope

GB/T 39744-2021 is the English-translated version of 基于三维模型的机械产品电子手册编制通用要求.

GB/T 39744-2021 sets the general requirements for the electronic manual of a mechanical product built on a three-dimensional model. It gives the composition of such a manual, the basic principles and the process of making it, the general and detailed requirements, the requirements on its assessment, on its release and use and on its management.

It applies to the compilation of the 3D model based electronic manuals of mechanical products. Machine builders, technical writers and the software houses that produce the manuals use it. Issued on 9 March 2021, it has applied since 1 October 2021.

Found what you need?

Document preview — GB/T 39744-2021

National Standard of the People's Republic of China

ICS: 01.100.01
Classification: J 04

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Abbreviations
5 Composition
6 Basic principles
7 Preparation process
7.1 Information preparation
7.2 Making E-Manual
7.3 Electronic manual output document
8 General requirements
8.1 Form
8.2 Content
8.3 Compilation
8.4 Data
8.5 Other
9 Detailed requirements
9.1 SBOM
9.2 DE
9.3 DM
9.4 E-Manual Template
10 Rating
10.1 General
10.2 Evaluation process
10.3 Evaluation Basis
10.4 Rating data
10.5 Assessment content
10.6 Assessment summary processing
11 Publishing and Application
11.1 Release requirements
11.2 Application requirements
12 Management
12.1 General requirements
12.2 Full life cycle management requirements
12.3 Data management requirements
Appendix A (informative appendix) The data relationship of each stage in the electronic manual
Appendix B (informative appendix) SBOM construction process
Appendix C (informative appendix) Model construction process
Appendix D (informative appendix) DE construction process
Appendix E (informative appendix) DM construction process
Appendix F (informative appendix) template construction process
Appendix G (informative appendix) EBOM to SBOM conversion rules
Appendix H (informative appendix) Web page template style
References

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009.

1 Scope

This standard specifies the composition, basic principles and flow of electronic manuals for mechanical products based on three-dimensional models (hereinafter referred to as electronic manuals).

Content such as procedures, general requirements, detailed requirements, assessment requirements, release and application requirements, and management requirements.

This standard applies to the compilation of electronic manuals for mechanical products based on three-dimensional models.

2 Normative references

The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this document. For undated reference documents, the latest version (including all amendments) is applicable to this document.

GB/T 3101-1993 General principles related to quantities, units and symbols

GB/T 19678.1-2018 Compilation composition, content and presentation method of instructions for use Part 1: General rules and detailed requirements

GB/T 21600-2010 General requirements for digital prototypes of mechanical products

GB/T 24734.4-2009 Technical Product Documentation Digital Product Definition Data General Rules Part 4: Design Model Requirements

GB/T 26099.2-2010 General Rules for 3D Modeling of Mechanical Products Part 2: Part Modeling

3 Terms and definitions

The following terms and definitions apply to this document. A document describing product information, the content of which is organized in a structured manner, with a three-dimensional model as the main form of expression, and can be published as electronic Or paper form, and used to guide the use, repair and maintenance of the product.

3.2 Product lifecycle lifecycle

Including the market demand research phase, product development phase, product design phase, sales phase and after-sales service phase, etc. Assembly. [GB/T 18725-2008,3.206]

3.3 Bill of Materials

In the production process, list the items and quantities of the accessories, parts and materials used in the assembled parts. [GB/T 18725-2008,3.32]

3.4 Design bill of materials

Carry out product design according to customer orders or design requirements, and list the items and numbers of accessories, parts and materials used in the assembled parts Amount list.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 22 pages — is available in the English PDF.

Referenced standards

Normative references

GB/T 3101-1993

Similar standards

GB/T 46848.1-2025|GB/T 46848.2-2025|GB/T 46848.3-2025|GB/T 46848.4-2025|GB/T 46848.5-2025|GB/T 46848.6-2025

How to Download GB/T 39744-2021

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.