GB/T 39673.53-2020Home and building electronic systems (HBES) and building automation and systems (BACS) - Part 53: EMC requirements for HBFS/BAGS used in environments (English PDF)
住宅和楼宇电子系统(HBES)及楼宇自动化和控制系统(BACS) 第53部分:用于工业环境下的HBES和BACS的EMC要求
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 39673.53-2020 in 30 minutes.
Issued by
State Administration for Market Regulation, China National Standardization Administration
Level / Type
National · Recommended
Issue date
December 14, 2020
Implementation date
July 1, 2021
Scope
GB/T 39673.53-2020 is the English-translated version of 住宅和楼宇电子系统(HBES)及楼宇自动化和控制系统(BACS) 第53部分:用于工业环境下的HBES和BACS的EMC要求.
GB/T 39673.53-2020 is the Chinese standard "Home and building electronic systems (HBES) and building automation and systems (BACS) - Part 53: EMC requirements for HBFS/BAGS used in environments".
Its scope clause reads: This part of GB/T 39673 specifies the requirements for residential and building electronic systems (HBES) and building automation and control systems (BACS) EMC requirements for HBES and BACS used in industrial environments: This section applies to residential and building electronic systems (HBES) and building automation and control systems (BACS): Chapter 1 of GB/T 39673:51-2020 is applicable after the following modifications: Replace paragraph 6 with the following: According to the definition given in GB/T 17799:2, this section specifies the EMC requirements for the installation of HBES/BACS in an industrial environment: Note: The industrial environment includes office areas that may exist in industrial sites: Industrial automation systems are not in this scope:. Its clauses include terms and definitions, abbreviations.
Found what you need?
Document preview — GB/T 39673.53-2020
National Standard of the People's Republic of China
- ICS
- 29.120.01
- Classification
- K 60
Issued by: State Administration for Market Regulation, China National Standardization Administration
Contents
- Preface
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions, abbreviations
- 4 General requirements
- 5 Performance criteria
- 6 Standard test conditions
- 7 EMC requirements
1 Scope
This part of GB/T 39673 specifies the requirements for residential and building electronic systems (HBES) and building automation and control systems (BACS)
EMC requirements for HBES and BACS used in industrial environments:
This section applies to residential and building electronic systems (HBES) and building automation and control systems (BACS):
Chapter 1 of GB/T 39673:51-2020 is applicable after the following modifications:
Replace paragraph 6 with the following:
According to the definition given in GB/T 17799:2, this section specifies the EMC requirements for the installation of HBES/BACS in an industrial environment:
Note: The industrial environment includes office areas that may exist in industrial sites:
Industrial automation systems are not in this scope:
2 Normative references
The following documents are indispensable for the application of this document: For dated reference documents, only the dated version applies to this article
Pieces: For undated references, the latest version (including all amendments) applies to this document:
GB/T 17626:4 Electromagnetic compatibility test and measurement technology Electrical fast transient pulse group immunity test (GB/T 17626:4-
2018,IEC 61000-4-4:2012,IDT)
GB/T 17626:5 Electromagnetic compatibility test and measurement technology surge (impact) immunity test (GB/T 17626:5-2019,
IEC 61000-4-5:2014, IDT)
GB/T 17626:6 Electromagnetic compatibility test and measurement technology Radio frequency field induced conducted disturbance immunity (GB/T 17626:6-
2017, IEC 61000-4-6:2013, IDT)
GB/T 17799:2 Electromagnetic compatibility general standard industrial environment immunity test (GB/T 17799:2-2003,
IEC 61000-6-2:1999, IDT)
GB 17799:4 Electromagnetic compatibility general standard industrial environment emission (GB 17799:4-2012, IEC 61000-6-4:
2011, IDT)
GB/T 39673:51-2020 Home and Building Electronic System (HBES) and Building Automation and Control System (BACS) No: 5-1
Part: EMC requirements, conditions and test arrangements (IEC 63044-5-1:2017, MOD)
3 Terms and definitions, abbreviations
The terms, definitions and abbreviations defined in GB/T 39673:51-2020 apply to this document:
ISO and IEC keep the terminology database used for standardization at the following address:
---IEC Electropedia: http://www:electropedia:org;
---ISO online browsing platform: http://www:iso:org/obp:
GB/T 20138 | GB/T 42407 | GB/T 40097 | GB/T 39673.4 | GB/T 39673.2 | GB/T 39673.52 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
GB/T 17626 · IEC 61000 · GB/T 17799 · GB 17799 · GB/T 39673 · IEC 63044
How to Download GB/T 39673.53-2020
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 17799.3-2001 — Electromagnetic compatibility - Generic standards Emission standard for residential, commercial and light-industrial environments
GB 17799.3-2012 — Electromagnetic compatibility (EMC) - Generic standards - Emission standard for residential, commercial and light-industrial environments
GB 17799.3-2023 — Electromagnetic compatibility(EMC) - Generic standards - Part 3: Emission standard for equipment in residential environments
GB/T 39673.53-2020
$125.00