GB/T 39673.52-2020Home and building electronic systems (HBES) and building automation and control systems (BACS) - Part 52: EMC requirements for HBES/BACS used in residential, commercial and light-industrial environments (English PDF)

Foreword

GB/T 39673 "Home and Building Electronic System (HBES) and Building Automation and Control System (BACS)" intends to publish the following parts:

---Part 1: General requirements;

---Part 2: Environmental conditions;

---Part 3: Electrical safety requirements;

---Part 4: Functional safety;

---Part 5: EMC requirements;

---Part 51: EMC requirements, conditions and test arrangements;

---Part 52: EMC requirements for HBES and BACS used in residential, commercial and light industrial environments;

---Part 53: EMC requirements for HBES and BACS used in industrial environments;

---Part 6: Planning and installation of HBES:

This part is part 52 of GB/T 39673:

This section was drafted in accordance with the rules given in GB/T 1:1-2009:

This part uses the redrafting law to amend and adopt IEC 63044-5-2:2017 "Housing and Building Electronic System (HBES) and Building Automation

And Control System (BACS) Part 5-2: EMC requirements for HBES and BACS used in residential, commercial and light industrial environments":

The technical differences between this part and IEC 63044-5-2:2017 and the reasons are as follows:

---Regarding normative reference documents, this section has made adjustments with technical differences to adapt to my country's technical conditions and adjustments:

The situation is collectively reflected in Chapter 2 "Normative Reference Documents", and the specific adjustments are as follows:

* Replace IEC 61000-4-2 with GB/T 17626:2 which is equivalent to adopting international standards;

* Replace IEC 61000-4-3 with GB/T 17626:3 which is equivalent to adopting international standards;

* Replace IEC 61000-4-4 with GB/T 17626:4 which is equivalent to adopting international standards;

* Replace IEC 61000-4-5 with GB/T 17626:5 which is equivalent to adopting international standards;

* Replace IEC 61000-4-6 with GB/T 17626:6 which is equivalent to adopting international standards;

* Replace IEC 61000-4-8 with GB/T 17626:8 which is equivalent to adopting international standards;

* Replace IEC 61000-4-11 with GB/T 17626:11 which is equivalent to adopting international standards;

* Replace IEC 61000-6-3 with GB 17799:3 which is equivalent to the international standard:

This section has made the following editorial changes:

---According to the relevant regulations of GB/T 1:1-2009, in accordance with the national standard naming rules, the standard name is changed to "House and Building Electronics

System (HBES) and Building Automation and Control System (BACS) Part 52: EMC requirements, conditions and test arrangements";

---According to the relevant regulations of GB/T 1:1-2009, in Chapter 1 "Scope", "This part of GB/T 39673 provides

EMC requirements of HBES and BACS under the environment";

---According to the relevant regulations of GB/T 1:1-2009, in Chapter 1 "Scope", "This part applies to residential and building electronics

System (HBES) and Building Automation and Control System (BACS)":

This part was proposed by China Electrical Equipment Industry Association:

This part is under the jurisdiction of the National Electrical Accessories Standardization Technical Committee (SAC/TC67):

Drafting organizations of this section: Guangdong South China Home Appliances Research Institute, Feidiao Electric Group Co:, Ltd:, Jiangsu Tongling Technology Co:, Ltd:, Hangzhou Hongyan

Electric Appliance Co:, Ltd:, Simon Electric (China) Co:, Ltd:, China National Electrical Equipment Research Institute Co:, Ltd:, Bull Group Co:, Ltd:,

Zhuhai Gree Electric Appliance Co:, Ltd:, Zhejiang Youmoo Technology Co:, Ltd:, Guangdong Xinruan Technology Co:, Ltd:, Weikai Testing Technology Co:, Ltd:,

The Fifth Institute of Electronics of the Ministry of Industry and Information Technology, Xiamen Keli Electronics Co:, Ltd:, Dongguan Zhiheng Household Appliances Technology Co:, Ltd:, Xiamen

Wanming Electronics Co:, Ltd:, Shaanxi Yatney Electronics Co:, Ltd:, Xiamen Meike Security Technology Co:, Ltd:, Xiamen Kexin Electronics Co:, Ltd:,

Urumqi Guojun Mould Factory, Xiamen Caimao Communication Technology Co:, Ltd:, Zhejiang Delixi International Electrical Co:, Ltd:

Introduction

GB/T 39673 involves the development and testing of home and building electronic systems (HBES) and building automation and control systems (BACS):

GB/T 39673:51, GB/T 39673:52 and GB/T 39673:53 ensure that the electromagnetic compatibility requirements of HBES/BACS equipment meet

To the common level:

And Control System (BACS) Part 52:

Used in residential, commercial and light industrial environments

EMC requirements for HBES and BACS

1 Scope

This part of GB/T 39673 specifies the use of residential and building electronic systems (HBES) and building automation and control systems (BACS):

EMC requirements for HBES and BACS in residential, commercial and light industrial environments:

This section applies to residential and building electronic systems (HBES) and building automation and control systems (BACS):

Chapter 1 of GB/T 39673:51-2020 is applicable after the following modifications:

Replace paragraph 6 with the following:

According to the definition given in GB/T 17799:1, this section specifies the installation of HBES/BACS in residential, commercial and light industrial environments

EMC requirements:

2 Normative references

The following documents are indispensable for the application of this document: For dated reference documents, only the dated version applies to this article

Pieces: For undated references, the latest version (including all amendments) applies to this document:

GB/T 17626:2 Electromagnetic compatibility test and measurement technology Electrostatic discharge immunity test (GB/T 17626:2-2018,

IEC 61000-4-2:2008, IDT)

GB/T 17626:3 Electromagnetic compatibility test and measurement technology Radio frequency electromagnetic field radiation immunity test (GB/T 17626:3-

2016, IEC 61000-4-3:2010, IDT)

GB/T 17626:4 Electromagnetic compatibility test and measurement technology Electrical fast transient pulse group immunity test (GB/T 17626:4-

2018,IEC 61000-4-4:2012,IDT)

GB/T 17626:5 Electromagnetic compatibility test and measurement technology surge (impact) immunity test (GB/T 17626:5-2019,

IEC 61000-4-5:2014, IDT)

GB/T 17626:6 Electromagnetic compatibility test and measurement technology Radio frequency field induced conducted disturbance immunity (GB/T 17626:6-

2017, IEC 61000-4-6:2013, IDT)

GB/T 17626:8 Electromagnetic compatibility test and measurement technology Power frequency magnetic field immunity test (GB/T 17626:8-2006,

IEC 61000-4-8:2001, IDT)

GB/T 17626:11 Electromagnetic compatibility test and measurement technology Voltage sag, short-term interruption and voltage change immunity test

(GB/T 17626:11-2008, IEC 61000-4-11:2004, IDT)

GB 17799:3 General Standard for Electromagnetic Compatibility Emissions in residential, commercial and light industrial environments (GB 17799:3-2012,

IEC 61000-6-3:2011, IDT)

GB/T 39673:51-2020 Home and Building Electronic System (HBES) and Building Automation and Control System (BACS) No: 51

Part: EMC requirements, conditions and test arrangements (IEC 63044-5-1:2017, MOD)