Valid

GB/T 39621-2020Textiles - Quantitative chemical analysis - Mixture of cross-linked lyocell fibres and viscose or cupro or modal (method using formic acid and zinc chloride) (English PDF)

纺织品 定量化学分析 交联型莱赛尔纤维与粘胶纤维、铜氨纤维、莫代尔纤维的混合物(甲酸/氯化锌法)

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 39621-2020 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 14, 2020

Implementation date

July 1, 2021

Scope

GB/T 39621-2020 is the English-translated version of 纺织品 定量化学分析 交联型莱赛尔纤维与粘胶纤维、铜氨纤维、莫代尔纤维的混合物(甲酸/氯化锌法).

GB/T 39621-2020 is the Chinese standard "Textiles - Quantitative chemical analysis - Mixture of cross-linked lyocell fibres and viscose or cupro or modal (method using formic acid and zinc chloride)".

Its scope clause reads: This standard specifies the use of formic acid/zinc chloride method to determine cross-linked lyocell fiber, viscose fiber, cupro ammonia fiber after removing non-fibrous substances The method of fiber content in the two-component mixture of Vi or Modal fiber: This standard applies to the two-component mixture of cross-linked lyocell fiber and viscose fiber, cupra fiber or modal fiber: This standard does not apply to mixtures containing cross-linked lyocell fibers that have been severely chemically degraded, nor does it apply to mixtures containing certain Mixture of viscose fiber, cupra fiber or modal fiber that cannot be completely dissolved:. Its clauses include principle; reagents and materials; apparatus and equipment.

Found what you need?

Document preview — GB/T 39621-2020

National Standard of the People's Republic of China

ICS
59.080.01
Classification
W 04

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope
  • 2 Normative references
  • 3 Principle
  • 4 Reagents and materials
  • 5 Apparatus and equipment

1 Scope

This standard specifies the use of formic acid/zinc chloride method to determine cross-linked lyocell fiber, viscose fiber, cupro ammonia fiber after removing non-fibrous substances

The method of fiber content in the two-component mixture of Vi or Modal fiber:

This standard applies to the two-component mixture of cross-linked lyocell fiber and viscose fiber, cupra fiber or modal fiber:

This standard does not apply to mixtures containing cross-linked lyocell fibers that have been severely chemically degraded, nor does it apply to mixtures containing certain

Mixture of viscose fiber, cupra fiber or modal fiber that cannot be completely dissolved:

2 Normative references

The following documents are indispensable for the application of this document: For dated reference documents, only the dated version applies to this article

Pieces: For undated references, the latest version (including all amendments) applies to this document:

GB/T 2910:1 Textile Quantitative Chemical Analysis Part 1: General Test Rules

3 Principle

According to the difference in solubility of cross-linked lyocell fiber, viscose fiber, cupra fiber and modal fiber in formic acid/zinc chloride solution (See Appendix A), use formic acid/zinc chloride solution to dissolve viscose fiber, cupra fiber or modal fiber from a mixture of known dry mass

The solution is removed, the residue is collected, washed, dried and weighed, and the percentage of the dry mass of the mixture is calculated with the corrected mass: By difference

Calculate the mass percentage of the second fiber:

4 Reagents and materials

4:1 Unless otherwise stated, only use analytical reagents: Use the reagents and materials specified in GB/T 2910:1 and 4:2~4:5 of this standard:

4:2 Formic acid/zinc chloride solution: 20g anhydrous zinc chloride (mass fraction >98%) and 68g anhydrous formic acid add water to 100g:

Note: This reagent is harmful to humans, and proper protective measures should be taken when using it:

4:3 Sodium sulfide solution: add 5:0g of sodium sulfide into 100mL of 70 °C water, shake well: The solution should be prepared immediately:

Note: SOS powder is a dangerous chemical, easy to spontaneously ignite, and irritating: Please read the safety instructions and other related materials carefully before use:

Good protective measures:

4:4 Acetic acid solution: Take 40mL of glacial acetic acid and dilute to 1L with water:

4:5 Sodium dodecyl sulfonate solution: Dissolve 1:0 g of sodium dodecyl sulfonate in 1L of water:

5 Apparatus and equipment

5:1 Use equipment specified in GB/T 2910:1 and 5:2~5:4 of this standard:

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 39621-2020

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 39621-2020

$175.00