Valid

GB/T 39430-2020Specifications for the blanks of high reliability gears (English PDF)

高可靠性齿轮毛坯技术要求

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 39430-2020 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

November 19, 2020

Implementation date

June 1, 2021

Scope

GB/T 39430-2020 is the English-translated version of 高可靠性齿轮毛坯技术要求.

GB/T 39430-2020 is the Chinese standard "Specifications for the blanks of high reliability gears". Its scope clause reads: This standard specifies the classification of high-reliability gear blanks, chemical composition ratio, technical requirements for smelting and forging, and process control and inspection.

Inspection specifications.

This standard applies to aerospace, rail transit, marine equipment, wind power, nuclear power, metallurgy, petrochemical, mining, industrial robots and other important transmission For the rolling or forging blanks of gears in the dynamic field, the outer diameter of the blanks is generally not more than 1200mm, and the mass of a single piece is not more than 3t.

Others have high reliability Gear blanks with sexual requirements can also be used as a reference. This standard is not recommended for use in general industry, medical, automotive and other fields. Its clauses include blank classification.

Found what you need?

Document preview — GB/T 39430-2020

National Standard of the People's Republic of China

ICS
21.200
Classification
J 17

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 3 Blank classification
  • 3.1 Classification by part working conditions
  • 3.2 Classification by material characteristics
  • 3.3 Classification by application area
  • 4 Technical requirements
  • 4.1 Raw materials
  • 4.2 Chemical composition
  • 4.3 Forging
  • 4.4 Delivery status
  • 4.5 Mechanical properties
  • 4.6 Macrostructure
  • 4.7 Fracture
  • 4.8 Macrostructure
  • 4.9 Hardenability
  • 4.10 Ultrasonic flaw detection
  • 4.11 Shape and size
  • 4.12 Appearance
  • 4.13 Mark
  • 4.14 Other
  • 5 Production process control and product inspection
  • 5.1 Process control
  • 5.2 Quality consistency requirements
  • 5.3 Inspection method

1 Scope

This standard specifies the classification of high-reliability gear blanks, chemical composition ratio, technical requirements for smelting and forging, and process control and inspection.

Inspection specifications.

This standard applies to aerospace, rail transit, marine equipment, wind power, nuclear power, metallurgy, petrochemical, mining, industrial robots and other important transmission

For the rolling or forging blanks of gears in the dynamic field, the outer diameter of the blanks is generally not more than 1200mm, and the mass of a single piece is not more than 3t. Others have high reliability

Gear blanks with sexual requirements can also be used as a reference.

This standard is not recommended for use in general industry, medical, automotive and other fields.

2 Normative references

The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this article

Pieces. For undated references, the latest version (including all amendments) applies to this document.

GB/T 222 Allowable deviation of chemical composition of finished steel

GB/T 223 (all parts) Steel and alloy chemical analysis methods

GB/T 225 Steel Hardenability Test Method for End Quenching (Jominy Test)

GB/T 226 Steel Macrostructure and Defect Inspection Method

GB/T 228.1 Tensile Test of Metallic Materials Part 1.Room Temperature Test Method

GB/T 229 Charpy pendulum impact test method for metallic materials

GB/T 231.1 Brinell Hardness Test of Metallic Materials Part 1.Test Method

GB/T 1814 Steel Fracture Inspection Method

GB/T 1979 Structural steel macrostructure defect rating chart

GB/T 3480.5 Calculation of load-bearing capacity of spur gears and helical gears-Part 5.Strength and quality of materials

GB/T 4162 Ultrasonic testing method for forged and rolled steel bars

GB/T 6394 Method for determination of average grain size of metals

GB/T 10561 Standard Determination of Non-metallic Inclusions in Steel Grading Chart Microscopic Inspection Method

GB/T 12363 Functional classification of forgings

JB/T 5000.15 General Technical Requirements for Heavy Machinery Part 15.Nondestructive Testing of Steel Forgings

3 Blank classification

3.1 Classification by part working conditions

3.1.1

According to the different working conditions and importance of the parts, they are divided into two categories. According to the provisions of GB/T 12363, they are represented by I and II.

Importance is higher than Class II.

3.1.2

The category of gear blanks should be marked in the order drawings or related technical documents. If not specified, it will default to category II.

3.2 Classification by material characteristics

3.2.1

According to the material's contact fatigue limit sigmaHlim and bending fatigue limit sigmaFlim, it is divided into two levels. According to the provisions of GB/T 3480.5 […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 39430-2020

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 39430-2020

$240.00