Valid

GB/T 39376-2020Leather - Sampling - Number of items for a gross sample (English PDF)

皮革 抽样 批样抽样数量

Preview PDF

This is a limited preview

Buy now to download the full PDF

Need quotation for your management?

Get a formal quotation for GB/T 39376-2020 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

November 19, 2020

Implementation date

June 1, 2021

Scope

GB/T 39376-2020 is the English-translated version of 皮革 抽样 批样抽样数量.

GB/T 39376-2020 — This Standard specifies the method for sampling the entire number of items from the batch. This Standard applies to the sampling of various types of leather products.

Found what you need?

Document preview — GB/T 39376-2020

National Standard of the People's Republic of China

Issued by: SAMR; SAC

Contents

  • Foreword...3
  • 1 Scope...4
  • 2 Terms and definitions...4
  • 3 Sampling method...4
  • 4 Sampling report...5

Foreword

This Standard was drafted in accordance with the rules given in GB/T 1.1-2009.

This Standard uses the redrafting method to modify and adopt ISO 2588:2014,

"Leather - Sampling - Number of items for a gross sample".

The technical differences between this Standard and ISO 2588:2014 and the

reasons are as follows:

-- Modify the scope of the standard to conform to industry language habits

and avoid repetition and ambiguity (see Chapter 1);

-- Delete "2 Normative references"; the subsequent chapters and articles are

arranged forward in proper order; there is no specific reference content;

the deletion does not affect the understanding and use of the standard;

-- Modify the terms and definitions of "batch" to conform to industry habits

and for convenience of use (see 2.1);

-- Modify "Table 1 -- Minimum number of items" to clarify the number of items

when the batch size is 1, which is convenient for operation (see Table 1);

-- Adjust the contents of the sampling report, to conform to our country's

custom (see Chapter 4).

For convenience of use, this Standard makes the following editorial changes:

-- Delete the explanatory note in "Scope".

This Standard was proposed by China National Light Industry Council.

This Standard shall be under the jurisdiction of National Technical Committee

252 on Leather of Standardization Administration of China (SAC/TC 252).

The drafting organizations of this Standard: Zhejiang Tongtianxing Group Joint-

stock Co., Ltd., Guangdong Huizhou Quality & Measuring Supervision Testing

Institute, Ruike Testing Services (Shenzhen) Co., Ltd., China Leather &

Footwear Research Institute Co., Ltd., Jiaxing Fur and Footwear Industry

Research Institute, Dongguan Rui'en Shoes Co., Ltd.

The drafters of this Standard: Lan Li, Hu Kun, Zhao Xiaodong, Dong Jiabin, Du

Zhiyao, Fang Zetian, Ren Keshuai.

Leather - Sampling - Number of items for a gross

sample

1 Scope

This Standard specifies the method for sampling the entire number of items

from the batch.

This Standard applies to the sampling of various types of leather products.

2 Terms and definitions

The following terms and definitions are applicable to this document.

2.1 Batch; lot

A certain number of products of the same variety that are put into production

with the same variety of raw materials and produced within a certain period of

time according to the same production process.

2.2 Gross sample

The number of entire items that are selected from a batch.

2.3 Item

The whole piece of leather that is taken from the gross sample.

3 Sampling method

3.1 If there is no special agreement on sampling in the relevant parties or the

test method, it is recommended to proceed according to the provisions of 3.2 ~

3.3.

3.2 The number of items for a gross sample depends on the size of the batch

and the purpose of sampling, and is also determined by the accuracy of the test

results, the diversity of the test performance, and the error of the test process.

3.3 The minimum number of items for a gross sample is shown in Table 1.

Table 1 -- Minimum number of items

in pieces

......

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — all pages — is available in the English PDF.

Referenced standards

How to Download GB/T 39376-2020

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 39376-2020

$85.00