GB/T 39209-2020Offshore platform rig heave compensating drawworks (English PDF)
海洋平台钻井升沉补偿绞车
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 39209-2020 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
October 11, 2020
Implementation date
May 1, 2021
Scope
GB/T 39209-2020 is the English-translated version of 海洋平台钻井升沉补偿绞车.
GB/T 39209-2020 is the Chinese standard "Offshore platform rig heave compensating drawworks".
Its scope clause reads: This standard specifies the composition, basic parameters and markings, requirements, and requirements of offshore platform drilling heave compensation drawworks (hereinafter referred to as drilling compensation drawworks) Test methods, inspection rules, signs, packaging, transportation and storage.
This standard applies to the design, manufacture and acceptance of compensation drawworks for drilling wells. Compensation drawworks for other purposes can be used as reference.
Found what you need?
Document preview — GB/T 39209-2020
National Standard of the People's Republic of China
- ICS
- 47.020.20
- Classification
- U 35
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope1
- 2 Normative references1
- 3 Terms and definitions2
- 4 Composition, basic parameters and marking2
- 4.1 Composition2
- 4.2 Basic parameters3
- 4.3 Product marking4
- 5 Requirements4
- 5.1 Design4
- 5.2 Material5
- 5.3 Welding5
- 5.4 Appearance5
- 5.5 Performance6
- 5.6 Dimensional tolerance and quality7
- 5.7 Enclosure protection7
- 5.8 Security7
- 5.9 Environmental adaptability7
- 5.10 Electromagnetic compatibility7
- 6 Test method7
- 6.1 Welding7
- 6.2 Appearance7
- 6.3 Performance8
- 6.4 Dimensional tolerance and quality8
- 6.5 Shell protection9
- 6.6 Security9
- 6.7 Environmental adaptability9
- 6.8 Electromagnetic compatibility9
- 7 Inspection rules9
- 7.1 Inspection classification9
- 7.2 Type inspection9
- 7.3 Factory inspection10
- 8 Marking, packaging, transportation and storage10
- 8.1 Sign10
- 8.2 Packaging11
- 8.3 Transport11
- 8.4 Storage11
- Appendix A (normative appendix) Functional test of well compensation drawworks12
1 Scope
This standard specifies the composition, basic parameters and markings, requirements, and requirements of offshore platform drilling heave compensation drawworks (hereinafter referred to as drilling compensation drawworks)
Test methods, inspection rules, signs, packaging, transportation and storage.
This standard applies to the design, manufacture and acceptance of compensation drawworks for drilling wells. Compensation drawworks for other purposes can be used as reference.
2 Normative references
The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this document.
For undated references, the latest version (including all amendments) applies to this document.
GB/T 191 Packaging, Storage and Transportation Graphic Mark
GB/T 712-2011 Structural steel for ships and marine engineering
GB/T 1720-1979 Determination of paint film adhesion
GB/T 1804-2000 General Tolerance Tolerance of linear and angular dimensions without tolerance
GB/T 3811-2008 Crane Design Code
GB 3836.1 Explosive environment Part 1.General requirements for equipment
GB/T 4208-2017 Enclosure protection grade (IP code)
GB/T 5099 (all parts) seamless steel gas cylinder
GB/T 6388 Transport packaging receiving and dispatching signs
GB/T 7826 System Reliability Analysis Technology Failure Mode and Effect Analysis (FMEA) Program
GB/T 8163-2018 Seamless steel pipe for conveying fluid
GB/T 10250-2007 Electromagnetic compatibility of marine electrical and electronic equipment
GB/T 12920 General technical conditions for marine pneumatic systems
GB/T 13306 signs
GB/T 14039-2002 Code of pollution grade of solid particles in hydraulic transmission oil
GB/T 14976-2012 Stainless steel seamless steel pipe for fluid transportation
GB/T 17744-2015 Oil and gas industry drilling and workover equipment
GB/T 20663 Energy storage pressure vessel
GB/T 23507.1-2017 Specification for Electrical Equipment for Oil Drilling Rig Part 1.Main Motor
GB/T 25133 Hydraulic system assembly pipeline flushing method
GB/T 25444 (all parts) Electrical installations for mobile and fixed offshore installations
GB/T 30507 Guidelines for sampling and cleanliness determination of particulate pollutants in lubricating oil systems and hydraulic oil systems for ships and marine technology
GB/T 30790.5 Paint and varnish protective coating system for corrosion protection of steel structures Part 5.Protective coating system
GB/T 31415 Paints and varnishes performance requirements for protective coating systems for marine buildings and related structures
GB/T 32474 Rubber hoses and hose assemblies for oil drilling well control equipment
GB/T 33145 Large-volume steel seamless gas cylinder […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 39209-2020
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 39209-2020
$240.00