GB/T 39163-2020Test methods of the bonding strength for target-backing plate assemblies (English PDF)
靶材与背板结合强度测试方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 39163-2020 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
November 19, 2020
Implementation date
October 1, 2021
Scope
GB/T 39163-2020 is the English-translated version of 靶材与背板结合强度测试方法.
GB/T 39163-2020 is the Chinese standard "Test methods of the bonding strength for target-backing plate assemblies". Its scope clause reads: This standard specifies the test method for the bonding strength between the target and the backplane.
This standard is applicable to the test method for the bonding strength between the target material and the backplane for coating in the field of microelectronics.
Note. The combination of target and backplane includes brazing (traditional solder, conductive silver glue, nano-foil welding, etc.), diffusion welding, electron beam or laser welding, explosive welding, friction Welding, mechanical compounding, cold spraying, thermal spraying, etc. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 39163-2020
National Standard of the People's Republic of China
- ICS
- 19.060
- Classification
- H 22
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Target
- 3.2 Target blank
- 3.3 Backplane
- 3.4 Maximum force
1 Scope
This standard specifies the test method for the bonding strength between the target and the backplane.
This standard is applicable to the test method for the bonding strength between the target material and the backplane for coating in the field of microelectronics.
Note. The combination of target and backplane includes brazing (traditional solder, conductive silver glue, nano-foil welding, etc.), diffusion welding, electron beam or laser welding, explosive welding, friction
Welding, mechanical compounding, cold spraying, thermal spraying, etc.
2 Normative references
The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this article
Pieces. For undated references, the latest version (including all amendments) applies to this document.
GB/T 228.1-2010 Metallic materials tensile test part 1.room temperature test method
GB/T 228.2 Tensile Test of Metallic Materials Part 2.High Temperature Test Method
GB/T 8170 Numerical rounding rules and the expression and determination of limit values
GB/T 10623 Terminology for Mechanical Properties Test of Metallic Materials
GB/T 16825.1 Inspection of static uniaxial testing machine Part 1.Inspection and test of force measuring system of tensile and (or) compression testing machine calibration
3 Terms and definitions
The following terms and definitions defined in GB/T 228.1-2010 apply to this document. For ease of use, the following is repeated
Some terms and definitions in GB/T 228.1-2010.
3.1 Target
The cathode part in sputtering deposition technology. The cathode material is in the form of molecules, atoms or ions under the impact of positively charged cations.
The formula is separated from the cathode and deposited on the anode surface. It is composed of target blank and back plate.
3.2 Target blank
The part of the cathode used as sputtering material.
3.3 Backplane
The part used to support or fix the target blank.
3.4 Maximum force
Fm
The maximum force that the specimen can resist after the yield stage. For materials with no obvious yield (continuous yield), the maximum force during the test.
Note. Rewrite GB/T 228.1-2010, definitions 3.9.1 and 3.9.2.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 39163-2020
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 39163-2020
$185.00