GB/T 39115-2020Energy efficiency evaluation methods for process automation (English PDF)
过程自动化能效评估方法
This is a limited preview
Buy now to download the full PDF (30 pages)
Need quotation for your management?
Get a formal quotation for GB/T 39115-2020 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
October 11, 2020
Implementation date
May 1, 2021
Scope
GB/T 39115-2020 is the English-translated version of 过程自动化能效评估方法.
GB/T 39115-2020 is the Chinese standard "Energy efficiency evaluation methods for process automation". Its scope clause reads: This Standard specifies the energy efficiency evaluation indicator system, the general model of energy efficiency evaluation, and the general procedure of energy efficiency evaluation for the process industry.
This Standard applies to energy efficiency evaluation and energy efficiency diagnosis, etc. in the process industry.
Its clauses include terms and definitions; energy efficiency evaluation indicators for process industry; energy efficiency benchmark; energy efficiency diagnosis for process industry; general procedure of energy efficiency evaluation for.
It was issued by the State Administration for Market Regulation on OCTOBER 11, 2020 and took effect on MAY 01, 2021.
Found what you need?
Document preview — GB/T 39115-2020
National Standard of the People's Republic of China
- ICS
- 25.040
- Classification
- N 10
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword3
- 1 Scope4
- 2 Terms and definitions4
- 3 Factors related to production energy efficiency in process industry7
- 3.1 General7
- 3.2 Energy consumption7
- 3.3 Material consumption8
- 3.4 Pollution releases8
- 3.5 Production management8
- 3.6 Output factors8
- 4 Energy efficiency evaluation indicators for process industry9
- 4.1 Overview of energy efficiency related indicators in the process industry9
- 4.2 Definitions of energy efficiency indicators10
- 5 General model of energy efficiency evaluation for process industry13
- 6 Energy efficiency benchmark15
- 7 General procedure of energy efficiency evaluation for process industry15
- 8 Energy efficiency diagnosis for process industry17
- Appendix A (Informative) Examples of energy efficiency evaluation18
- Bibliography30
1 Scope
This Standard specifies the energy efficiency evaluation indicator system, the general model of energy efficiency evaluation, and the general procedure of energy efficiency evaluation for the process industry.
This Standard applies to energy efficiency evaluation and energy efficiency diagnosis, etc. in the process industry.
2 Terms and definitions
The following terms and definitions apply to this document.
2.1 Energy
Electricity, fuel, steam, heat, compressed air and other similar media.
Note 1: Energy in various forms, including renewable energy, can be purchased, stored, disposed of, used in devices or processes, and recycled.
Note 2: Energy can be defined as the power of a system to generate external activities or work. [GB/T 23331-2012, definition 3.5]
2.2 Energy conversion
The transformation of the physical or chemical form of energy. [CEN/CLC/TR 16103.2010, definition 4.1.7]
2.3 Primary energy
Energy which has not undergone any conversion process. [CEN/CLC/TR 16103.2010, definition 4.3.8]
2.9 Specific energy consumption
Energy consumption per physical unit output. [CEN/CLC/TR 16103.2010, definition 4.3.10]
2.10 Energy management
Coordinating activities to direct and control the energy use of an entity. [CEN/CLC/TR 16103.2010, definition 4.5.1]
2.11 Input
The flow of products, substances, or energy which enter a unit process. [GB/T 24040-2008, definition 3.21]
2.12 Output
The flow of products, substances, or energy leaving a unit process. [GB/T 24040-2008, definition 3.25]
2.13 Device
An entity which implements control, execution, and/or sensing functions, and connects with other such entities in the automation system. [GB/T 19659.1-2005, definition 3.11]
2.14 Process
A set of interrelated or interacting activities which transform inputs into outputs. [GB/T 24040-2008, definition 3.11]
3 Factors related to production energy efficiency in process industry
3.3 Material consumption
The consumption of various materials, auxiliary materials, etc. by devices, production units, production processes, and the entire production process of other products during the process industry production.
Example: The materials consumed in the ethylene production process include mixed naphtha, hydrogenated tail oil, etc.; the auxiliary materials consumed include various catalysts, additives, etc. The materials consumed in the steel production process include iron ore; the auxiliary materials include coolants and recarburizers, etc.
3.4 Pollution releases
The releases of various types of pollution generated by devices, production units, production process sections, and the entire production process of other products during the process industry production.
Example: Wastes such as water pollutants, atmospheric pollutants and solid waste discharged from the steel production process. Atmospheric pollutants mainly contain fluorine, sulfur dioxide, various particulate matter, etc. Water pollutants mainly include heavy metals and suspended solids such as fluoride, cyanide, lead, etc. Solid waste mainly includes blast furnace slag and steel slag, etc.
3.5 Production management
During the process industry production, on-site operation of devices, production units, production process sections; process parameter setting and adjustment, etc.; as well as the quality testing and guarantee of raw materials, intermediate products and final products; and the factors such as balance of supply and demand of materials and energy.
Example: Outlet temperature, excess air coefficient, exhaust gas temperature setting, etc. of blast furnace and cracking furnace, etc.
3.6 Output factors
The definition of energy efficiency is the ratio of output energy, product, service or performance to input energy or other quantitative relationship. Therefore, output factors, including the number of products and the amount of energy output, will affect energy efficiency.
Example: Production capacity, device energy utilization efficiency, product output of specific energy consumption, etc. during the production process.
B Lost resource RI1 C Recycled resource RC2 D Lost resource RI2 E Recycled resource RCq F Lost resource RIq
According to the energy efficiency evaluation method in this clause, refer to Appendix A for evaluation examples in practical applications.
6 Energy efficiency benchmark
The energy efficiency benchmark is to compare the basic quantitative value provided by the energy efficiency level. The methods for establishing energy efficiency benchmark include:
a) Mechanism modeling method: According to the objective laws of thermodynamics, chemical reaction, physical change, etc., derive the energy efficiency function relationship formula. The energy efficiency benchmark established by the mechanism modeling method is an ideal value;
b) Mathematical analysis method: Based on historical data, through data fitting or statistical analysis methods, determine the energy efficiency baseline;
c) Empirical method: Use industry-defined standards, or the best energy efficiency results in the production process of excellent enterprises or this enterprise as energy efficiency benchmarks.
The energy efficiency benchmark preferentially selects the design value calculated by the mechanism modeling method. When there is no design value, it is possible to consider using mathematical statistics to select the data of past historical period or the best historical data. When the above two situations are not feasible, empirical method can also be used to determine the energy efficiency benchmark.
7 General procedure of energy efficiency evaluation for process industry
The general evaluation procedure of production energy efficiency for process industry is shown in Figure 4. processes and systems;
d) For each component of the evaluation object, based on the established energy efficiency indicator system, calculate the applicable indicators;
e) Compare the calculation results of each indicator of the evaluation object with the established energy efficiency benchmark; analyze the comparison results;
f) Form energy efficiency diagnostic output, for production energy efficiency optimization;
g) Adopt various energy efficiency optimization methods, to improve the energy efficiency level. At the same time, modify the corresponding energy efficiency benchmark.
8 Energy efficiency diagnosis for process industry
The manufacturing process of process industry is continuous. The operation is required to be in a stable state. Large changes in the parameters reflecting the operation state shall be avoided as much as possible. When there is an abnormal energy efficiency in the production process, the calculation and analysis of multiple energy efficiency indicators at the equipment level, process level, and system level can be carried out; to diagnose the cause of abnormal energy efficiency and locate the abnormality; make corresponding adjustments to production and management; improve the energy efficiency level accordingly. delta t - Temperature difference, in degrees Celsius (°C); wCO - Carbon monoxide content in flue gas; alpha - Air coefficient.
A.4.2.2 Indicator calculation
Take the relevant data of No. 1 cracking furnace in Fushun Ethylene Plant:
Flue gas temperature: tg=153 Temperature of the hot air: ta=10 Atomized steam consumption: W=0 Oxygen content of flue gas: wO2=3.78% Carbon monoxide content in flue gas: wCO=0 Excess air coefficient: alpha=1.24 Calculate according to the simplified formula: eta=92.29%.
A.5 Example of system energy efficiency evaluation
- ethylene production system
A.5.1 Evaluation model and indicator
Take an ethylene production system in a petrochemical enterprise as an example. The technological process is mainly composed of units such as raw material preheating, cracking, quenching, compression, cold separation, thermal separation, refrigeration, waste alkali oxidation and gasoline hydrogenation. The energy efficiency evaluation model of the ethylene production system is shown in Figure A.4.
Where:
Mi - The mass of the input i-th fuel, steam, electricity, water or energy-consumed medium, in tons (t), kilowatt hours (kW · h) or cubic meters (m3);
Ri - The energy conversion factor, i.e. the conversion relationship between the input i-th fuel, steam, electricity, water or energy-consumed medium and kilogram of standard oil. GB 30250-2013 stipulates the energy conversion factor;
Qj - The amount of the j-th energy input into the ethylene production system from the outside, in kilograms of standard oil (kgoe).
b) Energy consumption of ethylene cracking unit The ethylene cracking system includes an ethylene cracking unit and a gasoline hydrogenation unit. The energy consumption sharing coefficient of the ethylene cracking unit is 0.7. The energy consumption sharing coefficient of the gasoline hydrogenation unit is 0.3. The types of energy consumed include fuel, water, electricity, steam, nitrogen, and wind. All energy is converted into standard oil:
1) Fuel: El1 = Mfuel oil × Rfuel oil + Mfuel gas × Rfuel gas + Mnatural gas × Rnatural gas + Mliquid hydrocarbon × Rliquid hydrocarbon + Mhydrogen × Rhydrogen Mfuel gas = (MLPG + Mnaphtha + Mlight hydrocarbon feed + Mhydrocracking tail oil + Mlight vacuum cap oil + Mhydrogenated C5 + Mexternally-supplied propane + Mpurge propane + Mtempered oil) × 12% - Mexternally-supplied methane + Mexternally-compensated LPG + Mhydrogen to fuel;
2) Water: El2 = Mindustrial water × Rindustrial water × 0.7 + Mliving water × Rliving water × 0.7 + Msoftened water × Rsoftened water × 0.7 + Mdesalted water × Rdesalted water × 0.7 + Mrecycled water × Rrecycled water × 0.7 + Mhot water × Rhot water × 0.7 - Mcondensed water × Rcondensed water - Mdeoxygenated water × Rdeoxygenated water
3) Electricity: El3 = Melectricity × Relectricity × 0.7
4) Steam: El4 = Msteam 3.5MPa × Rsteam 3.5MPa × 0.7 + (Msteam consumption 1.0MPa - Msteam output 1.0MPa) × Rsteam 1.0MPa + (Msteam consumption 0.3MPa - Msteam output 0.3MPa) × Rsteam 0.3MPa
5) Nitrogen and wind: El5 = Mnitrogen × Rnitrogen × 0.7 + Mcompressed air × Rcompressed air × 0.7 + Mdecoking air × Rdecoking air × 0.7
c) Energy consumption of gasoline hydrogenation unit The types of energy consumed by the gasoline hydrogenation unit include […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 30 pages — is available in the English PDF.
Similar standards
How to Download GB/T 39115-2020
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 39115-2020
$285.00