GB/T 39111-2020Technical requirements for dental model 3D scanner (English PDF)
牙颌模型三维扫描仪技术要求
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 39111-2020 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
September 29, 2020
Implementation date
October 1, 2021
Scope
GB/T 39111-2020 is the English-translated version of 牙颌模型三维扫描仪技术要求.
GB/T 39111-2020 is the Chinese standard "Technical requirements for dental model 3D scanner". Its scope clause reads: This standard specifies the requirements and test methods for three-dimensional scanners of dental models.
This standard applies to equipment for acquiring, editing and outputting 3D scan data of dental models (hereinafter referred to as "scanners"). Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 39111-2020
National Standard of the People's Republic of China
- ICS
- 11.060.10
- Classification
- C 33
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope1
- 2 Normative references1
- 3 Terms and definitions1
- 4 Requirements2
- 5 Test method2
- Appendix A (Normative Appendix) 3D Scanner Accuracy Test Method4
- Appendix B (Normative Appendix) Preparation of Standard Samples7
1 Scope
This standard specifies the requirements and test methods for three-dimensional scanners of dental models.
This standard applies to equipment for acquiring, editing and outputting 3D scan data of dental models (hereinafter referred to as "scanners").
2 Normative references
The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this article
Pieces. For undated references, the latest version (including all amendments) applies to this document.
GB 4793.1 Safety requirements for electrical equipment for measurement, control and laboratory use Part 1.General requirements
GB/T 16857.2 Product Geometric Technical Specification (GPS) Coordinate Measuring Machine Acceptance Test and Re-inspection Test Part 2.Used
Coordinate measuring machine for measuring linear dimensions
GB/T 17163-2008 Basic terminology of geometric quantity measuring instrument terminology
3 Terms and definitions
The following terms and definitions defined in GB/T 17163-2008 apply to this document.
3.1 Dental model
Models of oral soft and hard tissues often include the upper and lower teeth, dentition, gums and the mucosa that covers part of the jaw.
3.2 Singletoothmodel
A model or model of a single tooth or a single preparation.
3.3 Singlejawmodel
Upper or lower jaw model.
3.4 Occlusionrelation
The spatial positional relationship of the upper and lower jaw model in the occlusal state.
3.5 Occlusion model
Mandibular model in occlusal relationship.
3.6 STL file
A three-dimensional graphics file serving rapid prototyping technology. The STL file consists of the definitions of multiple triangles, each with three
The definition of an angular patch includes the three-dimensional coordinates of each vertex of the triangle and the normal vector of the triangular patch. The order of the triangle vertices follows
The right hand rule.
Note. There are two types of STL files. text files (ASCII format) and binary files (BINARY).
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 39111-2020
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 39111-2020
$210.00