GB/T 38987-2020Cemented carbide rods with helical coolant holes (English PDF)
硬质合金螺旋孔棒材
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 38987-2020 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
July 21, 2020
Implementation date
June 1, 2021
Scope
GB/T 38987-2020 is the English-translated version of 硬质合金螺旋孔棒材.
GB/T 38987-2020 is the Chinese standard "Cemented carbide rods with helical coolant holes". Its scope clause reads: This standard specifies the classification and schematic diagram, technical requirements, test methods, inspection rules, markings, packaging, and transportation of cemented carbide spiral hole bars.
Import, storage, quality certificate and purchase order (or contract) content. This standard is applicable to the processing of carbide spiral hole rods for cutting tools with internal cooling holes (hereinafter referred to as "spiral hole rods").
Found what you need?
Document preview — GB/T 38987-2020
National Standard of the People's Republic of China
- ICS
- 77.160
- Classification
- H 72
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Classification, schematic diagram and model representation rules
- 3.1 Classification
- 3.2 Schematic
1 Scope
This standard specifies the classification and schematic diagram, technical requirements, test methods, inspection rules, markings, packaging, and transportation of cemented carbide spiral hole bars.
Import, storage, quality certificate and purchase order (or contract) content.
This standard is applicable to the processing of carbide spiral hole rods for cutting tools with internal cooling holes (hereinafter referred to as "spiral hole rods").
2 Normative references
The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this article
Pieces. For undated references, the latest version (including all amendments) applies to this document.
GB/T 1800.2 Product Geometric Technical Specification (GPS) Linear Dimensional Tolerance ISO Code System Part 2.Standard Tolerance Zone
Code and limit deviation table of hole and shaft
GB/T 5242 Inspection rules and test methods for cemented carbide products
GB/T 5243 Marking, packaging, transportation and storage of cemented carbide products
3 Classification, schematic diagram and model representation rules
3.1 Classification
Spiral hole bars are divided into double spiral hole bars and triple spiral hole bars according to the number of holes. According to the supply status, it is divided into spiral hole blank bar and screw
Spin holes for fine grinding of bars.
3.2 Schematic
The schematic diagram of the double spiral hole blank bar is shown in Figure 1a), and the schematic diagram of the triple spiral hole blank bar is shown in Figure 1b).
a) Schematic diagram of blank bar with double spiral holes b) Schematic diagram of blank bar with three spiral holes
Description.
P ---Pitch, the linear distance of one rotation of the screw thread of the spiral hole bar;
L --- the length of the spiral hole bar;
d --- the hole diameter of the spiral hole bar;
D --- the outer diameter of the spiral hole bar;
e --- eccentricity, which is the distance between the center of the circle where the center of the two or three holes is located and the center of the bar;
TK ---hole spacing, the diameter of the circle where the center of the two or three holes is located.
Figure 1 Schematic diagram of spiral hole bar […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 38987-2020
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 38987-2020
$255.00