Valid

GB/T 38958-2020Wrought aluminum alloy precision forging—Technological specification (English PDF)

变形铝合金精密锻造 工艺规范

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 38958-2020 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

July 21, 2020

Implementation date

February 1, 2021

Scope

GB/T 38958-2020 is the English-translated version of 变形铝合金精密锻造 工艺规范.

GB/T 38958-2020 is the Chinese standard "Wrought aluminum alloy precision forging—Technological specification".

Its scope clause reads: This standard specifies the process specifications for deformed aluminum alloy precision forgings (hereinafter referred to as "forgings"), including general rules, forging drawing design, and equipment selection Model, mold design, process design.

This standard is applicable to the process preparation of deformed aluminum alloy precision forgings with a mass less than 15kg. Its clauses include terms and definitions; principles of process compilation.

Found what you need?

Document preview — GB/T 38958-2020

National Standard of the People's Republic of China

ICS
77.120.10
Classification
J 32

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope1
  • 2 Normative references1
  • 3 Terms and definitions1
  • 4 Process preparation principle1
  • 5 Process design5

1 Scope

This standard specifies the process specifications for deformed aluminum alloy precision forgings (hereinafter referred to as "forgings"), including general rules, forging drawing design, and equipment selection

Model, mold design, process design.

This standard is applicable to the process preparation of deformed aluminum alloy precision forgings with a mass less than 15kg.

2 Normative references

The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this article

Pieces. For undated references, the latest version (including all amendments) applies to this document.

GB/T 1804-2000 General Tolerance Tolerance of linear and angular dimensions without tolerance

GB/T 3191 Aluminum and aluminum alloy extruded bars

GB/T 6519 Ultrasonic inspection method for deformed aluminum and magnesium alloy products

GB/T 6892 General industrial aluminum and aluminum alloy extruded profiles

GB/T 8541 Forging terminology

GB/T 8545-2012 Dimensional deviation and machining allowance of aluminum and aluminum alloy die forgings

GB/T 9452-2012 Method for measuring effective heating area of heat treatment furnace

GB/T 18851 (all parts) Non-destructive testing Penetration testing

GB/T 34359 General technical conditions for wrought aluminum alloy precision forgings

JB/T 9177 Steel Die Forging Structural Elements

YS/T 67 deformed aluminum and aluminum alloy round ingot

YS/T 591 Deformed aluminum and aluminum alloy heat treatment

3 Terms and definitions

The following terms and definitions defined in GB/T 8541 apply to this document.

3.1 Hotbacktothefurnace

During the forging process, the temperature of the blank is close to the final forging temperature. Forging should not be continued, and it needs to be reheated.

4 Principles of process compilation

4.1 General

The general process preparation content should include forging drawing design, equipment selection, mold design, and process design.

4.2 Forging drawing design

4.2.1 Parting line

The parting line should be able to ensure the continuous and complete flow line of the forging, and avoid eddy current, through-flow and end exposure. The parting line should be as shown in Figure 1a) and Figure 1b) […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 38958-2020

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 38958-2020

$150.00