Valid

GB/T 38883-2020Non-destructive testing—Active thermographic testing method (English PDF)

无损检测 主动式红外热成像检测方法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 38883-2020 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

June 2, 2020

Implementation date

January 1, 2021

Scope

GB/T 38883-2020 is the English-translated version of 无损检测 主动式红外热成像检测方法.

GB/T 38883-2020 is the Chinese standard "Non-destructive testing—Active thermographic testing method". Its scope clause reads: This standard specifies the general rules for active infrared thermal imaging detection methods in the field of industrial nondestructive testing.

This standard applies to active infrared thermal imaging inspection of composite materials, metal materials and coating materials, including but not limited to discontinuous inspection Measurement (for example. voids, cracks, delamination, slag inclusions, etc.) and coating thickness evaluation. Its clauses include terms and definitions.

Found what you need?

Document preview — GB/T 38883-2020

National Standard of the People's Republic of China

ICS
19.100
Classification
J 04

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Personnel requirements
  • 5 Method summary
  • 6 Thermal excitation
  • 7 Inspection system
  • 8 Testing environment
  • 9 Comparison test block
  • 10 Detection
  • 11 Testing procedures and reports
  • Appendix A (informative appendix) Common types of heat sources
  • Appendix B (informative appendix) production of comparative test blocks

1 Scope

This standard specifies the general rules for active infrared thermal imaging detection methods in the field of industrial nondestructive testing.

This standard applies to active infrared thermal imaging inspection of composite materials, metal materials and coating materials, including but not limited to discontinuous inspection

Measurement (for example. voids, cracks, delamination, slag inclusions, etc.) and coating thickness evaluation.

2 Normative references

The following documents are essential for the application of this document. For dated reference documents, only the dated version applies to this article

Pieces. For the cited documents without date, the latest version (including all amendments) applies to this document.

GB/T 9445 Qualification and certification of non-destructive testing personnel

GB/T 12604.9 Non-destructive testing term infrared testing

GB/T 20737 General terms and definitions for nondestructive testing

GB/T 26643 Guide for Infrared Thermal Imaging Method of Flashlight for Nondestructive Testing

GB/T 31768.2 Non-destructive testing. Flash-activated infrared thermal imaging method Part 2.Testing specifications

3 Terms and definitions

The terms and definitions defined in GB/T 12604.9, GB/T 20737, GB/T 26643 and GB/T 31768.2 and the following terms and definitions apply to this file.

3.1 Active infrared thermal imaging detection

Infrared thermal imaging inspection that requires additional thermal excitation.

3.2 Thermal excitation

An external energy excitation source for infrared thermal imaging detection is applied to the measured object.

3.3 Local excitation

Local energy excitation that produces three-dimensional thermal diffusion locally.

3.4 Two-dimensionalexcitation

By uniformly heating (or cooling) the two-dimensional energy excitation of the surface of the test piece.

3.5 Overall incentive excitationofthewholevolume

Perform overall energy excitation on the test piece.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 38883-2020

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 38883-2020

$210.00