Valid

GB/T 38847-2020Intelligent factory—Technical requirements for industrial control abnormal monitoring instrument (English PDF)

智能工厂　工业控制异常监测工具技术要求

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 38847-2020 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

July 21, 2020

Implementation date

February 1, 2021

Scope

GB/T 38847-2020 is the English-translated version of 智能工厂　工业控制异常监测工具技术要求.

GB/T 38847-2020 is the Chinese standard "Intelligent factory—Technical requirements for industrial control abnormal monitoring instrument".

Its scope clause reads: This standard specifies the deployment, classification and technology of industrial control abnormal monitoring tools for smart factories (hereinafter referred to as. monitoring tools) Claim.

This standard applies to the design, development and testing of industrial control abnormal monitoring tools. Its clauses include terms, definitions and abbreviations.

Found what you need?

Document preview — GB/T 38847-2020

National Standard of the People's Republic of China

ICS: 25.040
Classification: N 10

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviations
4 Deployment of industrial control abnormal monitoring tools
5 Classification of industrial control abnormal monitoring tools
5.1 Classification of technical requirements
5.2 Classification of technical requirements
6 Technical requirements
6.1 Basic level
6.2 Enhanced level
Appendix A (Normative Appendix) Environmental Adaptability Requirements

1 Scope

This standard specifies the deployment, classification and technology of industrial control abnormal monitoring tools for smart factories (hereinafter referred to as. monitoring tools)

Claim.

This standard applies to the design, development and testing of industrial control abnormal monitoring tools.

2 Normative references

The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this article

Pieces. For undated references, the latest version (including all amendments) applies to this document.

GB/T 2423.5-2019 Environmental Test Part 2.Test Method Test Ea and Guideline. Impact

GB/T 2423.10 Environmental Test Part 2.Test Method Test Fc. Vibration (Sine)

GB/T 4208-2017 Enclosure protection grade (IP code)

GB 4824 Industrial, scientific and medical (ISM) radio frequency equipment disturbance characteristic limits and measurement methods

GB/T 4857.20 Collision test method for packaging and transportation packages

GB/T 4857.23-2012 Basic test of packaging and transportation packages Part 23.Random vibration test method

GB/T 9254 Information Technology Equipment Radio Disturbance Limits and Measurement Methods

GB/T 13729-2019 Telecontrol terminal equipment

GB/T 15153.1 Telecontrol Equipment and System Part 2.Working Conditions Part 1.Power Supply and Electromagnetic Compatibility

GB/T 17214.4 Working conditions of industrial process measurement and control devices Part 4.Corrosion and erosion effects

GB/T 17626.2 Electromagnetic compatibility test and measurement technology Electrostatic discharge immunity test

GB/T 17626.3 Electromagnetic compatibility test and measurement technology Radio frequency electromagnetic field radiation immunity test

GB/T 17626.4 Electromagnetic compatibility test and measurement technology Electrical fast transient pulse group immunity test

GB/T 17626.5 Electromagnetic compatibility test and measurement technology surge (impact) immunity test

GB/T 17626.6 Electromagnetic compatibility test and measurement technology Radio frequency field induced conducted disturbance immunity

GB/T 17626.8 Electromagnetic compatibility test and measurement technology Power frequency magnetic field immunity test

GB/T 17626.10 Electromagnetic compatibility test and measurement technology Damped oscillation magnetic field immunity test

GB/T 17626.11 Electromagnetic compatibility test and measurement technology Voltage sag, short-term interruption and voltage change immunity test

GB/T 17626.12-2013 Electromagnetic compatibility test and measurement technology Ring wave immunity test

GB/T 17626.16 Electromagnetic compatibility test and measurement technology 0Hz~150kHz common mode conducted disturbance immunity test

GB/T 17626.17 Electromagnetic compatibility test and measurement technology DC power input port ripple immunity test

GB/T 17626.29 Electromagnetic compatibility test and measurement technology DC power input port voltage sag, short-term interruption and voltage change

Modified immunity test

GB/T 20275-2013 Information Security Technology Network Intrusion Detection System Technical Requirements and Test Evaluation Methods

3 Terms, definitions and abbreviations

The following terms and definitions apply to this document.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

GB/T 32202.1-2026|GB/T 32202.2-2026|GB/T 42126.4-2026|GB/T 47234-2026|GB/T 47683-2026|GB/T 47696-2026

How to Download GB/T 38847-2020

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.