Valid

GB/T 38845-2020Data description of smart instrumentation—Positioners (English PDF)

智能仪器仪表的数据描述 定位器

Preview PDF

This is a limited preview

Buy now to download the full PDF (203 pages)

Need quotation for your management?

Get a formal quotation for GB/T 38845-2020 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

July 21, 2020

Implementation date

February 1, 2021

Scope

GB/T 38845-2020 is the English-translated version of 智能仪器仪表的数据描述 定位器.

GB/T 38845-2020 is the Chinese standard "Data description of smart instrumentation—Positioners". Its scope clause reads: This standard specifies a collection of operating parameters and requirements used to describe valve/actuator accessories, which can be used for valve/actuator accessories.

Operational attribute list (OLOP) and device attribute list (DLOP) of software (including locator and I/P converter). This standard applies to the description of the locator of the electronic data exchange process.

Note 1.The structure of OLOP and DLOP conforms to the general structure defined in GB/T 20818.11-2018 and IEC 61987-21.2015 and Based on the structure defined in GB/T 20818.10-2017, DLOP also conforms to the terms defined in IEC 60534-7.

Note 2.The attribute library and block library used in the attribute list (LOP) are given in Appendix A and Appendix B, respectively. Its clauses include terms and definitions, abbreviations.

Found what you need?

Document preview — GB/T 38845-2020

National Standard of the People's Republic of China

ICS
25.040
Classification
N 10

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope1
  • 2 Normative references1
  • 3 Terms and definitions, abbreviations1
  • 3.1 Terms and definitions1
  • 3.2 Abbreviations1
  • 4 Data description of valve/actuator accessories related operating parameters and requirements set1
  • 4.1 Overview1
  • 4.2 OLOP and DLOP2
  • Appendix A (Normative Appendix) Operational attribute list of valve/actuator accessories3
  • Appendix B (Normative Appendix) Device attribute list of positioner and I/P converter13
  • References269

1 Scope

This standard specifies a collection of operating parameters and requirements used to describe valve/actuator accessories, which can be used for valve/actuator accessories.

Operational attribute list (OLOP) and device attribute list (DLOP) of software (including locator and I/P converter).

This standard applies to the description of the locator of the electronic data exchange process.

Note 1.The structure of OLOP and DLOP conforms to the general structure defined in GB/T 20818.11-2018 and IEC 61987-21.2015 and

Based on the structure defined in GB/T 20818.10-2017, DLOP also conforms to the terms defined in IEC 60534-7.

Note 2.The attribute library and block library used in the attribute list (LOP) are given in Appendix A and Appendix B, respectively.

2 Normative references

The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this article

Pieces. For undated references, the latest version (including all amendments) applies to this document.

GB/T 20818.10-2017 Part 10 of Data Structure and Elements in Process Equipment Catalog for Industrial Process Measurement and Control

Points. Basic principles of list of attributes (LOPs) used for industrial process measurement and control electronic data exchange

GB/T 20818.11-2018 Industrial Process Measurement and Control Process Equipment Catalog Data Structure and Elements Part 11.

General structure of attribute lists (LOPs) for electronic data exchange of measuring equipment

IEC 61987-21.2015 Data structure and elements in the catalog of industrial process measurement and control process equipment Part 21.Use

The general structure of the List of Attributes (LOP) of automated valves for electronic data interchange [Industrial-processmeasurementandcon- trol-Datastructuresandelementsinprocessequipmentcatalogues-Part 21.ListofProperties (LOP)ofautomatedvalvesforelectronicdataexchange-Genericstructures]

3 Terms and definitions, abbreviations

3.1 Terms and definitions

The terms and definitions defined in GB/T 20818.10-2017 and GB/T 20818.11-2018 apply to this document.

3.2 Abbreviations

The following abbreviations apply to this document.

LOP. List of Properties (ListofProperties)

OLOP. Operating List of Properties (OperatingListofProperties)

DLOP. Device List of Properties (DeviceListofProperties)

4 Data description of relevant operating parameters and requirements collection of valve/actuator accessories

4.1 Overview

This standard specifies a collection of operating parameters and requirements used to describe valve/actuator accessories (including positioners, I/P converters)

The list of operational attributes (OLOP) and the list of device attributes (DLOP).

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 203 pages — is available in the English PDF.

Similar standards

How to Download GB/T 38845-2020

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
203 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 38845-2020

$3,560.00