Valid

GB/T 38843-2020Data description of smart instrumentation—Actuators (English PDF)

智能仪器仪表的数据描述 执行机构

Preview PDF

This is a limited preview

Buy now to download the full PDF (64 pages)

Need quotation for your management?

Get a formal quotation for GB/T 38843-2020 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

June 2, 2020

Implementation date

January 1, 2021

Scope

GB/T 38843-2020 is the English-translated version of 智能仪器仪表的数据描述 执行机构.

GB/T 38843-2020 is the Chinese standard "Data description of smart instrumentation—Actuators". Its scope clause reads: This standard specifies the operating attribute list (OLOP) used to describe the operating parameters of the actuator and the set of requirements, as well as the actuator Device attribute list (DLOP).

This standard applies to the description of actuators in the electronic data exchange process. Note 1.The structure of OLOP and DLOP conforms to the general structure defined in GB/T 20818.11-2018 and IEC 61987-21.2015 and GB/T 20818.

The basis of the LOP structure defined in 10-2017, DLOP also conforms to the terms defined in IEC 60534-7. Note 2.The property library and block library used in the property list (LOP) are given in Appendix A and Appendix B respectively. Its clauses include terms and definitions, abbreviations.

Found what you need?

Document preview — GB/T 38843-2020

National Standard of the People's Republic of China

ICS
25.040
Classification
N 10

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword I
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions, abbreviations
  • 3.1 Terms and definitions
  • 3.2 Acronyms
  • 4 Data description of the operating parameters and requirements of the actuator
  • 4.1 Overview
  • 4.2 OLOP and DLOP
  • Appendix A (Normative Appendix) List of Operating Attributes of Executing Agency
  • Appendix B (Normative Appendix) List of equipment attributes for different types of valve actuators
  • References

1 Scope

This standard specifies the operating attribute list (OLOP) used to describe the operating parameters of the actuator and the set of requirements, as well as the actuator

Device attribute list (DLOP).

This standard applies to the description of actuators in the electronic data exchange process.

Note 1.The structure of OLOP and DLOP conforms to the general structure defined in GB/T 20818.11-2018 and IEC 61987-21.2015 and GB/T 20818.

The basis of the LOP structure defined in 10-2017, DLOP also conforms to the terms defined in IEC 60534-7.

Note 2.The property library and block library used in the property list (LOP) are given in Appendix A and Appendix B respectively.

2 Normative references

The following documents are essential for the application of this document. For dated reference documents, only the dated version applies to this article

Pieces. For the cited documents without date, the latest version (including all amendments) applies to this document.

GB/T 20818.10-2017 Industrial Process Measurement and Control Data Structure and Elements in Process Equipment Catalogue Part 10

Score. Basic Principles of Attribute Lists (LOPs) for Electronic Data Interchange for Industrial Process Measurement and Control

GB/T 20818.11-2018 Data structures and elements in the catalog of industrial process measurement and control process equipment Part 11.

General structure of attribute lists (LOPs) for electronic data exchange of measuring equipment

IEC 61987-21.2015 Data structures and elements in the catalog of industrial process measurement and control process equipment Part 21.Use

List of Attributes (LOP) of Automatic Valves for Electronic Data Exchange [Industrial-processmeasurementand control-Datastructuresandelementsinprocessequipmentcatalogues-Part 21.ListofProperties (LOP)ofautomatedvalvesforelectronicdataexchange-Genericstructures]

3 Terms and definitions, abbreviations

3.1 Terms and definitions

The terms and definitions defined in GB/T 20818.10-2017 and GB/T 20818.11-2018 are applicable to this document.

3.2 Acronyms

The following abbreviations apply to this document.

LOP. List of Properties (ListofProperties)

OLOP. Operating Property List (OperatingListofProperties)

DLOP. Device property list (DeviceListofProperties)

4 Data description of the operating parameters and requirements of the actuator

4.1 Overview

This standard specifies the operating attribute list (OLOP) and device attribute list used to describe the operating parameters and requirements of the actuator (DLOP).

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 64 pages — is available in the English PDF.

Similar standards

How to Download GB/T 38843-2020

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
64 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 38843-2020

$1,055.00