Valid

GB/T 38792-2020Technical specification for cytological evaluation of protein allergenicity (English PDF)

蛋白质致敏性细胞学评价技术规范

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 38792-2020 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

April 28, 2020

Implementation date

November 1, 2020

Scope

GB/T 38792-2020 is the English-translated version of 蛋白质致敏性细胞学评价技术规范.

GB/T 38792-2020 is the Chinese standard "Technical specification for cytological evaluation of protein allergenicity". Its scope clause reads: This standard specifies the cytological evaluation requirements and verification methods of protein sensitization.

This standard applies to the cytological evaluation of food protein allergenicity mediated by immunoglobulin E (IgE). Its clauses include terms and definitions; requirements; verification method.

Found what you need?

Document preview — GB/T 38792-2020

National Standard of the People's Republic of China

ICS
07.080
Classification
A 21

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 requirements
  • 5 verification method

1 Scope

This standard specifies the cytological evaluation requirements and verification methods of protein sensitization.

This standard applies to the cytological evaluation of food protein allergenicity mediated by immunoglobulin E (IgE).

2 Normative references

The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this article

Pieces. For undated references, the latest version (including all amendments) applies to this document.

GB/T 6682 Analytical laboratory water specifications and test methods

3 Terms and definitions

The following terms and definitions apply to this document.

3.1 Proteinalergenicity

The characteristic of allergic reactions induced by protein.

Note. The protein sensitization in this standard specifically refers to the interaction of IgE bound to the surface of basophils (RBL-2H3) with proteins that cause beta-aminohexine

The degree of glycosidase release.

4 requirements

4.1

In accordance with relevant laws, regulations and standards, samples are received, stored, handed over, prepared, recycled, returned/destroyed, and relevant

Appropriate management systems and procedures.

4.2

The laboratory should meet the first-level biosafety requirements. The cell experiment work area generally consists of a preparation room, a buffer room, a sterile room, and a cell preservation room.

composition. Among them, the area of the buffer room should be no less than 3m2, and there should be a locker and an ultraviolet lamp. The intensity of the ultraviolet lamp is no less than 1.5W/m3.

The distance between the UV lamp source and the ground should not exceed 2.5m, and the irradiation time for each time is 20min~30min. The minimum standard of aseptic level of the clean room should reach

To ten thousand.

4.3

The type, quantity, performance, range and accuracy of the instruments and equipment used in the evaluation should be able to meet the needs of the evaluation. Utensils needed for evaluation

Should go through aseptic treatment, the test operation process is aseptic operation.

4.4

Experimental water should meet the requirements of GB/T 6682, and all reagents must be sterilized before use.

4.5

After the evaluation experiment is over, the experimental materials should be treated in a harmless manner.

4.6

The evaluation results of protein sensitization are expressed as the maximum release rate of beta-hexosaminidase.

4.7

The evaluation result should state the name, purity, concentration of the evaluated protein, and the maximum release rate of beta-hexosaminidase.

5 verification method

5.1 Determination of beta-hexosaminidase release rate

5.1.1 Sample preparation
5.1.1.1 Solid samples
5.1.1.1.1 Plant samples

After crushing the sample to be tested and filtering it with a 450µm microporous membrane, accurately weigh 5.00g into a polypropylene centrifuge tube and add it to the centrifuge tube

40mL water, shake well and mix well. Place the centrifuge tube horizontally in the shaker, 100 times/min at room temperature, shake for 12h, and separate at 5000r/min.

Heart for 10min, carefully pipet the supernatant into another clean polypropylene centrifuge tube, freeze-dry in vacuum, the solid protein powder can be stored at 2°C~

Store at 8°C for no more than 24h.

5.1.1.1.2 Animal samples

After the sample to be tested is stirred and homogenized, accurately weigh 5.00g, place it in the funnel, add 50mL petroleum ether for 3 consecutive rinses, and put it

Dry in the oven. Place the dried sample in a polypropylene centrifuge tube, and add 10 mL of 15% trichloroacetic acid solution to the centrifuge tube.

Integral), shake and mix thoroughly, and let stand for 10 min. Centrifuge the sample solution at 5000r/min for 10min, carefully aspirate the supernatant on another dry

In a clean polypropylene centrifuge tube, vacuum freeze-drying, the solid protein powder can be stored at 2°C~8°C for no more than 24h.

5.1.1.2 Liquid or semi-liquid samples

Weigh 5.00g liquid sample, place it in a funnel, add 50mL petroleum ether for 3 consecutive rinses, and put it into an oven to dry. will

Place the dried sample in a polypropylene centrifuge tube, add 40 mL of water, shake and mix well, and place the centrifuge tube horizontally in the shaker.

100 times/min at temperature, shaking overnight for 12h, centrifuge at 5000r/min for 10min, carefully pipette the supernatant on another clean polypropylene

In the heart tube, vacuum freeze-drying, the solid protein powder can be stored at 2°C~8°C for no more than 24h.

5.1.2 Sample solution preparation

Weigh 50.0 mg of the above protein sample, dissolve it with PBS buffer (see Appendix A) and dilute to a 50 mL volumetric flask to prepare

A stock solution with a mass concentration of 1 mg/mL. Use Tyrode's solution (see Appendix A) to dilute to a certain concentration of working solution during the test.

Use now.

5.1.3 Cell culture

Place RBL-2H3 cells (see Appendix A) in a cell culture flask, add 10 mL of cell culture medium (see Appendix A),

Incubate in a 37°C, 5% carbon dioxide cell incubator for 48h~72h, and observe the cell growth under an inverted microscope. When the cells grow to

When 80%~90% of the flask is incubated, cell count and cell inoculation are performed.

5.1.4 Cell seeding

Aspirate the cell culture fluid from the cell culture flask, and wash the cells once with PBS buffer. Add 2.0 mL of pancreas to the cell culture flask

Protease solution (see Appendix A), digest at 37°C for 2min~4min. Observe cell digestion under an inverted microscope.

When the circle is close to peeling off, pour out the trypsin solution. Add 10 mL of cell culture medium and pipette with a pipette to detach the cells to make a cell suspension liquid. Aspirate the cell suspension and add.200µL/well to the cell culture plate to make the cell seeding density 1×105 cells/mL. 37°C,5%

Cultivate in a carbon dioxide cell incubator for 24 hours to adhere to the wall.

5.1.5 Cell activation

Aspirate the cell culture medium from the cell culture plate, and wash the cells three times with PBS buffer. Add.200µL/well to the cell culture plate

Into the cell culture medium containing 50µg/mLIgE (see Appendix A), 37°C, 5% carbon dioxide cell incubator and continue to culture for 24h.

5.1.6 Stimulation of cells and proteins
5.1.6.1 Sample group

Aspirate the cell culture medium from the cell culture plate, and wash the cells three times with PBS buffer. Add 50µL/well to the cell culture plate

Add different concentrations of the protein to be tested working solution, 37 °C, 5% carbon dioxide cell incubator to react for 45 minutes. After the reaction is over, put in ice

The reaction is terminated in water. All the above items are provided with 3 multiple holes.

5.1.6.2 Release all groups

Aspirate the cell culture medium from the cell culture plate, and wash the cells three times with PBS buffer. Add 50µL/well to the cell culture plate

Cell lysate (see appendix A), gently pipette to make the lysate and RBL-2H3 cells fully contact, after 45 minutes of reaction at 4 °C, aspirate the whole

Part of the cell culture supernatant was centrifuged at 1200r/min for 5min, and the cell supernatant was collected. Set up 3 multiple holes above.

5.1.6.3 Blank control group

Aspirate the cell culture medium from the cell culture plate, and wash the cells three times with PBS buffer. Add 50µL/well to the cell culture plate

Tyrode's solution, 37°C, 5% carbon dioxide cell incubator react for 45min. After the reaction is over, put into ice water to stop the reaction. Above

Set 3 complex holes.

5.1.7 Determination

Aspirate the reaction solution after action in 5.1.6, transfer it to a new cell culture plate at 30 µL/well, and transfer it to the cell culture plate at 50 µL/well

Add PNP-NAG solution (see Appendix A), and after reacting at 37°C for 1 hour, add.200 µL/well of sodium carbonate stop solution (see Appendix A) to the end

Stop the reaction and measure the absorbance value of each well with a microplate reader at a wavelength of 405nm. The absorbance of the sample group is labeled A1, and the absorbance of the blank control group

The degree is marked as A0, and all release groups are marked as Am.

5.2 Calculation of beta-hexosaminidase release rate results

The beta-hexosaminidase release rate is calculated according to formula (1).

R= (A1-A0) (Am-A0)×

100% (1)

Where.

R ---beta-hexosaminidase release rate;

A1 --- the absorbance of the sample group;

A0 --- the absorbance of the blank control group;

Am---the absorbance of all release groups.

The average value of the parallel sample is the final release rate value, and the calculation result is kept to two decimal places.

Appendix A (Informative appendix)

Solution preparation

A.1 Water

Grade 2 water specified in GB/T 6682.

A.2 0.01mol/L phosphate buffer (PBS buffer)

Weigh 7.90g sodium chloride, 1.44g disodium hydrogen phosphate, 1.80g potassium dihydrogen phosphate, 0.20g potassium chloride, dissolve it with 980mL water, and use salt

Adjust the pH to 7.2 with acid, then add water to make the volume to 1000mL, filter and sterilize with 0.22µm microporous membrane, store at 4°C for later use or use similar products

Chemical products.

A.3 0.001mol/L p-nitrobenzene-N-acetyl-beta-D-glucosamine solution (PNP-NAG solution)

Weigh 34.2mg PNP-NAG, add water to dissolve and dilute to 100mL, filter and sterilize with 0.22µm microporous membrane, and store at 4°C for later use.

A.4 0.1mol/L sodium carbonate stop solution

Weigh 1.06g of sodium carbonate, add water to dissolve and dilute to 100mL, filter and sterilize with 0.22µm microporous membrane, and store at 4°C for later use.

A.5 Tyrode's solution

Weigh 7.90g sodium chloride, 0.20g potassium chloride, 0.26g magnesium sulfate heptahydrate, 0.07g sodium dihydrogen phosphate dihydrate, 1.00g sodium bicarbonate,

0.20g calcium chloride and 1.00g glucose, dissolve in 980mL water, adjust the pH to 7.2 with hydrochloric acid, and then add water to make the volume to 1000mL,

0.22µm microporous filter membrane is filtered and sterilized, stored at 4°C for later use or use similar commercial products.

A.6 Cell culture medium

Eagle's MinimalEssential Medium (MEM), add calf serum and penicillin-streptomyces

Was prepared into a cell culture medium containing 10% calf serum and 1% penicillin-streptomycin, in which the final concentration of penicillin and streptomycin

The degrees are 100U/mL and 100µg/mL, respectively. EMEM medium can choose powder medium supplied by various commodities, according to the manufacturer's proposal

For data preparation and sterilization, store at 4°C for later use.

A.7 Cell Lysate

Commercialized 1% TritionX-100 cell lysate, the main components are 50mmol Tris-HCl (pH7.2), 150mmol sodium chloride

And 5mmol ethylenediaminetetraacetic acid, the volume fraction is 1% Triton X-100.0.22µm microporous membrane filter sterilization, 4 °C storage for later use.

A.8 Trypsin solution

Weigh 2.50g trypsin (activity 1.250), add 1000mL PBS buffer (A.2), mix well, filter through 0.22µm microporous membrane

Filter out bacteria, store at 4°C for later use or use similar commercial products.

A.9 Basophils (RBL-2H3 cells)

Rat basophilic leukemia cells, ATCCCRL-2256 cell line.

A.10 IgE globulin

Mouse source, purity >95%, mass concentration >50µg/mL, various similar commercial products can be selected.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 38792-2020

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 38792-2020

$105.00