Valid

GB/T 38791-2020Oral care and cleansing products - Determination of boric acid and borates in toothpastes - Inductively coupled plasma atomic emission spectrometry (English PDF)

口腔清洁护理用品 牙膏中硼酸和硼酸盐含量的测定 电感耦合等离子体原子发射光谱法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 38791-2020 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

April 28, 2020

Implementation date

November 1, 2020

Scope

GB/T 38791-2020 is the English-translated version of 口腔清洁护理用品 牙膏中硼酸和硼酸盐含量的测定 电感耦合等离子体原子发射光谱法.

GB/T 38791-2020 is the Chinese standard "Oral care and cleansing products - Determination of boric acid and borates in toothpastes - Inductively coupled plasma atomic emission spectrometry".

Its scope clause reads: This standard specifies the principles, reagents, reagents, and methods for the determination of boric acid and borate in toothpaste by inductively coupled plasma atomic emission spectrometry.

Instruments and equipment, analysis procedures, result calculation, detection limit, quantitation limit, recovery rate and precision. This standard applies to the determination of boric acid and borate in oral care products such as toothpaste. Its clauses include principle; reagent.

Found what you need?

Document preview — GB/T 38791-2020

National Standard of the People's Republic of China

ICS
71.100.40
Classification
Y 43

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope
  • 2 Normative references
  • 3 Principle
  • 4 Reagent

1 Scope

This standard specifies the principles, reagents, reagents, and methods for the determination of boric acid and borate in toothpaste by inductively coupled plasma atomic emission spectrometry.

Instruments and equipment, analysis procedures, result calculation, detection limit, quantitation limit, recovery rate and precision.

This standard applies to the determination of boric acid and borate in oral care products such as toothpaste.

2 Normative references

The following documents are essential for the application of this document. For dated references, only the dated version applies to this article

Pieces. For the cited documents without date, the latest version (including all amendments) applies to this document.

GB/T 6682 Analysis laboratory water specifications and test methods

3 Principle

The sample to be tested is extracted with 5% nitric acid solution and cleaned by C18 solid phase extraction column, and then inductively coupled plasma atomic emission spectrometer is used.

Determination, quantification by internal standard method.

4 Reagent

Unless otherwise specified, the water used in this test is the first grade water specified in GB/T 6682.

4.1 Nitric acid

superior grade pure.

4.2 Mannitol

Premium grade pure.

4.3 Methanol

chromatographically pure.

4.4 Nitric acid solution (5%, volume fraction)

Pipette 50mL of nitric acid accurately (see 4.1) and put it in the right amount of water, then add water to dilute to 1000mL.

4.5 Yttrium standard solution (internal standard)

used as an internal standard, directly using the element standard solution with the standard substance certificate within the validity period, the standard solution is concentrated

The degree is 100 µg/mL.

4.6 Boric acid standard product (CAS No

10043-35-3). purity >=98%.

4.7 Boric acid standard stock solution I (1000µg/mL)

Weigh about 0.1g (accurate to 0.01mg) of boric acid standard (see 4.6) in 100mL plastic

In the volumetric flask, add nitric acid solution (see 4.4) to the mark and mix well.

4.8 Boric acid standard stock solution II (100µg/mL)

Pipette 1.0mL boric acid standard stock solution I (see 4.7) to 10mL plastic volume

In the bottle, dilute to the mark with nitric acid solution (see 4.4) and mix well.

4.9 Boric acid standard working solution

Pipette appropriate amount of boric acid standard stock solution II (see 4.8) into 25mL plastic colorimetric tube, add

25µL yttrium standard solution (see 4.5), formulated with nitric acid solution (see 4.4) into a series of concentrations 0.4µg/mL, 1.0µg/mL, 2.0µg/mL,

Standard working solution of 5.0µg/mL, 10.0µg/mL.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 38791-2020

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 38791-2020

$150.00