GB/T 38782-2020Shore connection for liquid cargo vessel (English PDF)
船舶液货通岸接头
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 38782-2020 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
June 2, 2020
Implementation date
January 1, 2021
Scope
GB/T 38782-2020 is the English-translated version of 船舶液货通岸接头.
GB/T 38782-2020 is the Chinese standard "Shore connection for liquid cargo vessel". Its scope clause reads: This standard specifies the classification, structure and basic dimensions, marking, technical requirements, Test methods, inspection rules and packaging, transportation and storage.
This standard applies to the design, manufacture, and acceptance of pipeline shore connections with a design pressure of 1.6 MPa in the central header area of tankers. Its clauses include classification, structure and basic size, marking.
Found what you need?
Document preview — GB/T 38782-2020
National Standard of the People's Republic of China
- ICS
- 47.020.30
- Classification
- U 55
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Classification, structure and basic size, marking
- 3.1 Classification
- 3.2 Structure and basic dimensions
1 Scope
This standard specifies the classification, structure and basic dimensions, marking, technical requirements,
Test methods, inspection rules and packaging, transportation and storage.
This standard applies to the design, manufacture, and acceptance of pipeline shore connections with a design pressure of 1.6 MPa in the central header area of tankers.
2 Normative references
The following documents are essential for the application of this document. For dated reference documents, only the dated version applies to this article
Pieces. For the cited documents without date, the latest version (including all amendments) applies to this document.
GB/T 600-2008 General technical requirements for marine pipeline valves
GB/T 699-2015 high-quality carbon structural steel
GB/T 700-2006 carbon structural steel
GB/T 1184-1996 Tolerances for shape and position tolerances are not noted
GB/T 1220-2007 stainless steel rod
GB/T 1804-2000 General tolerance Tolerance of linear and angular dimensions without tolerance
GB/T 1958-2017 Product Geometric Technical Specification (GPS) Geometric Tolerance Inspection and Verification
GB/T 3098.1-2010 Mechanical properties of fasteners Bolts, screws and studs
GB/T 3098.2-2015 Fastener mechanical performance nut
GB/T 3098.6-2014 Mechanical properties of fasteners Stainless steel bolts, screws and studs
GB/T 3098.15-2014 Mechanical properties of fasteners Stainless steel nuts
GB/T 20878-2007 Stainless steel and heat-resistant steel grades and chemical composition
QB/T 5257-2018 polytetrafluoroethylene (PTFE) sheet
ASMEB16.5-2017 pipe flanges and flange accessories (PipeFlangesandFlangedFittings)
ASMEB16.47-2017 Large Diameter Steel Flange (LargeDiameterSteelFlanges)
3 Classification, structure and basic size, marking
3.1 Classification
The shore connection is divided into two structural types according to the purpose.
a) Type A --- suitable for cargo oil and fuel oil systems;
b) Type B --- suitable for oil and gas recovery system.
3.2 Structure and basic dimensions
3.2.1
The structure and basic dimensions of the A-type shore connection are as specified in Figure 1 and Table 1.
3.2.2
The structure and basic dimensions of the B-type shore connection are as specified in Figure 2 and Table 2.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 38782-2020
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 38782-2020
$210.00