Valid

GB/T 38680-2020Technical guidelines for central heating system using low grade industrial surplus heat (English PDF)

工业低品位余热集中供热系统技术导则

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 38680-2020 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

March 31, 2020

Implementation date

October 1, 2020

Scope

GB/T 38680-2020 is the English-translated version of 工业低品位余热集中供热系统技术导则.

GB/T 38680-2020 is the Chinese standard "Technical guidelines for central heating system using low grade industrial surplus heat".

Its scope clause reads: This standard specifies the basic principles of industrial low-grade waste heat central heating system (hereinafter referred to as "waste heat heating system") Category and index calculation, engineering design and operation management.

This standard is applicable to the construction or reconstruction of the central heating system of civil buildings with industrial low-grade waste heat (hereinafter referred to as "waste heat") as the heat source project. Its clauses include terms and definitions.

Found what you need?

Document preview — GB/T 38680-2020

National Standard of the People's Republic of China

ICS
27.010
Classification
F 04

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 3.1 Low-grade industrial waste heat
  • 3.2 Waste heat resources

1 Scope

This standard specifies the basic principles of industrial low-grade waste heat central heating system (hereinafter referred to as "waste heat heating system")

Category and index calculation, engineering design and operation management.

This standard is applicable to the construction or reconstruction of the central heating system of civil buildings with industrial low-grade waste heat (hereinafter referred to as "waste heat") as the heat source project.

2 Normative references

The following documents are essential for the application of this document. For dated references, only the dated version applies to this article

Pieces. For the cited documents without date, the latest version (including all amendments) applies to this document.

GB/T 1028 Industrial residual energy resource evaluation method

GB/T 4272 Equipment and pipeline insulation technology general

GB/T 8175 Equipment and pipeline insulation design guidelines

GB 17167 General rules for the allocation and management of energy measuring instruments of energy-using units

GB/T 28638 Urban heat supply pipeline insulation structure heat loss test and insulation effect evaluation method

GB/T 29047 high-density polyethylene outer protective tube rigid polyurethane foam prefabricated direct buried insulation tube

GB/T 50627 Evaluation Standard of Urban Heating System

GB/T 50893 Technical Specification for Energy Saving Reform of Heating System

GB/T 51074 Urban Heating Planning Specification

CJJ28 Code for Construction and Acceptance of Urban Heating Pipe Network Engineering

CJJ34 Urban Heating Pipe Network Design Code

CJJ88 Technical Specification for Operation and Maintenance of Urban Heating System

CJJ105 Urban Heating Pipe Network Structure Design Code

CJJ/T 185 Technical Specification for Energy Saving of Urban Heating System

CJJ/T 223 Operation Technical Regulation of Heating Metering System

3 Terms and definitions

The following terms and definitions apply to this document.

3.1 Low-grade industrial waste heat

Low-quality waste heat that can be developed and utilized in the industrial production process. Including liquid below 95 °C, exhaust steam, flue gas below.200 °C,

Thermal energy contained in solids below 400 ° C can be utilized.

3.2 Waste heat resources

The amount of waste heat determined by technical and economic analysis.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 38680-2020

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 38680-2020

$105.00