GB/T 38611-2020Office furniture - Office work chairs - Test methods for the determination of stability, strength and durability (English PDF)
办公家具 办公工作椅 稳定性、强度和耐久性测试方法
This is a limited preview
Buy now to download the full PDF (47 pages)
Need quotation for your management?
Get a formal quotation for GB/T 38611-2020 in 30 minutes.
Issued by
State Administration for Market Regulation, China National Standardization Administration
Level / Type
National · Recommended
Issue date
March 31, 2020
Implementation date
October 1, 2020
Scope
GB/T 38611-2020 is the English-translated version of 办公家具 办公工作椅 稳定性、强度和耐久性测试方法.
GB/T 38611-2020 is the Chinese standard "Office furniture - Office work chairs - Test methods for the determination of stability, strength and durability". Its scope clause reads: This standard specifies the test methods for the stability, strength and durability of office work chairs.
This standard gives the test force value, cycle times Counting guidance. Test methods are developed for products that have been fully assembled and ready for use.
The dimensions in the test method only apply to office work chairs for adults. The test methods include forces acting on different components, simulating various uses of office work chairs during normal use and foreseeable misuse Usage status.
The test method is used to evaluate the performance of office work chairs without regard to product materials, structural design and production process. The test result is only valid for the tested sample.
When the test results need to be used for other similar products, then the test sample can represent a certain production The model is very important. The test conducted in accordance with this standard is to enable the product to provide satisfactory performance in the intended use environment.
This test method is Developed based on testing of unused products or components. If the test method is proved to be reasonable and effective, it can also be applied to product defects survey.
See Appendix B for the design data of the seat loading pad, and Appendix C for the design data of the stability loading pad. This standard does not contain requirements for products.
The requirements can be specified in separate requirements documents. If there is no required document, the force value See Appendix A (Informative) for the number of cycles.
These loads and cycles are suitable for any adult, regardless of their weight and usage The length of time to use the product. This standard does not specify the acceptance test method for individual parts of office work chairs.
This standard does not include performance aging and degradation tests. The test method does not evaluate the durability of soft packages, such as. filling materials and cladding material. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 38611-2020
National Standard of the People's Republic of China
- ICS
- 97.140
- Classification
- Y 80
Issued by: State Administration for Market Regulation, China National Standardization Administration
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 General test conditions
- 4.1 Preliminary preparations
- 4.2 Test equipment
- 4.3 Loading requirements
- 4.4 Tolerance
- 4.5 Test sequence
- 4.6 Test and result evaluation
- 5 Test equipment
- 5.1 Test ground
- 5.2 Stop
- 5.3 Seat surface loading pad
- 5.4 Small seat surface loading pad
- 5.5 Partial loading pad
- 5.6 Backrest loading pad
- 5.7 Handrail durability testing equipment
- 5.8 Bandage
- 5.9 Stable loading device
- 5.10 Loading disc
- 5.11 Caster durability test surface
- 6 Load point
- 6.1 Load point A
- 6.2 Load point B
- 6.3 Load point C
- 6.4 Load point D
- 6.5 Load point E
- 6.6 Load point F
- 6.7 Loading point G
- 6.8 Load point H
- 6.9 Loading point J
- 7 Test Method
- 7.1 Stability test
- 7.2 Static load test
- 7.3 Durability test
- 8 Test report
- Appendix B (Normative Appendix) Seat Loading Pad Data
- Appendix C (Normative Appendix) Stable Loading Device Data
1 Scope
This standard specifies the test methods for the stability, strength and durability of office work chairs. This standard gives the test force value, cycle times
Counting guidance.
Test methods are developed for products that have been fully assembled and ready for use.
The dimensions in the test method only apply to office work chairs for adults.
The test methods include forces acting on different components, simulating various uses of office work chairs during normal use and foreseeable misuse
Usage status.
The test method is used to evaluate the performance of office work chairs without regard to product materials, structural design and production process.
The test result is only valid for the tested sample. When the test results need to be used for other similar products, then the test sample can represent a certain production
The model is very important.
The test conducted in accordance with this standard is to enable the product to provide satisfactory performance in the intended use environment. This test method is
Developed based on testing of unused products or components. If the test method is proved to be reasonable and effective, it can also be applied to product defects survey.
See Appendix B for the design data of the seat loading pad, and Appendix C for the design data of the stability loading pad.
This standard does not contain requirements for products. The requirements can be specified in separate requirements documents. If there is no required document, the force value
See Appendix A (Informative) for the number of cycles. These loads and cycles are suitable for any adult, regardless of their weight and usage
The length of time to use the product.
This standard does not specify the acceptance test method for individual parts of office work chairs.
This standard does not include performance aging and degradation tests. The test method does not evaluate the durability of soft packages, such as. filling materials and cladding material.
2 Normative references
The following documents are essential for the application of this document. For dated references, only the dated version applies to this article
Pieces. For the cited documents without date, the latest version (including all amendments) applies to this document.
ISO 22880..2004 Castors and wheels swivel chair caster requirements (Castorsandwheels-Requirementsfor castorsforswivelchairs)
3 Terms and definitions
The following terms and definitions apply to this document.
3.1 Officeworkchair
Seat with backrest for single use, the seat and above can rotate in the horizontal plane and can be adjusted in height.
Note. Other adjustments may also be included.
GB/T 39016 | GB/T 38724 | GB/T 38723 | GB/T 32444 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 47 pages — is available in the English PDF.
Referenced standards
Normative references
ISO 22880
How to Download GB/T 38611-2020
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 38611-2020
$420.00