Valid

GB/T 38592-2020Determination of 4,4'-methylene-bis(2-chloroaniline) in textile dyeing and finishing auxiliaries (English PDF)

纺织染整助剂产品中4,4'-亚甲基双(2-氯苯胺)的测定

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 38592-2020 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

March 31, 2020

Implementation date

February 1, 2021

Scope

GB/T 38592-2020 is the English-translated version of 纺织染整助剂产品中4,4'-亚甲基双(2-氯苯胺)的测定.

GB/T 38592-2020 is the Chinese standard "Determination of 4,4'-methylene-bis(2-chloroaniline) in textile dyeing and finishing auxiliaries". Its scope clause reads: This standard specifies the principles, reagents or materials for the determination of 4,4'-methylenebis (2-chloroaniline) (MOCA) in textile dyeing and finishing auxiliary products.

Instruments and equipment, test procedures, test data processing and determination limits, recovery, precision and test reports. This standard applies to the determination of 4,4'-methylene bis (2-chloroaniline) in textile dyeing and finishing auxiliary products. Its clauses include principle; reagents or materials.

Found what you need?

Document preview — GB/T 38592-2020

National Standard of the People's Republic of China

ICS
71.100.40
Classification
G 70

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope
  • 2 Normative references
  • 3 Principle
  • 4 Reagents or materials

1 Scope

This standard specifies the principles, reagents or materials for the determination of 4,4'-methylenebis (2-chloroaniline) (MOCA) in textile dyeing and finishing auxiliary products.

Instruments and equipment, test procedures, test data processing and determination limits, recovery, precision and test reports.

This standard applies to the determination of 4,4'-methylene bis (2-chloroaniline) in textile dyeing and finishing auxiliary products.

2 Normative references

The following documents are essential for the application of this document. For dated references, only the dated version applies to this article

Pieces. For the cited documents without date, the latest version (including all amendments) applies to this document.

GB/T 6682 Analysis laboratory specifications and test methods

GB/T 8170-2008 Numerical Rounding Rules and Representation and Judgment of Limit Values

3 Principle

After the sample is dissolved in water, it is treated with anhydrous sodium sulfate and sodium chloride, and toluene is used as an extractant to extract 4,4'-methylenebis (2-chlorobenzene

Amine), after high-speed centrifugation to remove the precipitated material, take the upper layer liquid for filtration and injection, and use a gas chromatography-triple quadrupole tandem mass spectrometer (GC-

MS/MS) for determination and quantification by external standard method.

4 Reagents or materials

Unless otherwise specified, only use reagents identified as analytically pure and tertiary water specified in GB/T 6682.

4.1

Toluene.

4.2

Anhydrous sodium sulfate.

4.3

Sodium chloride.

4.4

Standard product of 4,4'-methylenebis (2-chloroaniline) (CAS No. 101-14-4). purity >=99.0% (mass fraction).

Product (4.4), prepared with toluene (4.1) into a standard stock solution with a concentration of about 1000 mg/L.

Note. The standard stock solution is stored in a brown bottle and stored at 0 °C ~ 4 °C, the validity period is 1 month.

The liquid (4.5) is placed in a volumetric flask and diluted stepwise with toluene (4.1) to the desired concentration, such as 0.1 mg/L, 1 mg/L, 5 mg/L, 10 mg/L,

20mg/L.

Note. The standard working solution is now ready for use, and can be formulated into other suitable concentrations as needed.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 38592-2020

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 38592-2020

$115.00