Valid

GB/T 38483-2020Determination of antibacterial activity for microbial secondary metabolites - Inhibition zone method (English PDF)

微生物源抗生素类次生代谢产物抗细菌活性测定 抑菌圈法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 38483-2020 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

November 19, 2020

Implementation date

November 19, 2020

Scope

GB/T 38483-2020 is the English-translated version of 微生物源抗生素类次生代谢产物抗细菌活性测定 抑菌圈法.

GB/T 38483-2020 is the Chinese standard "Determination of antibacterial activity for microbial secondary metabolites - Inhibition zone method". Its scope clause reads: This Standard specifies the method for determination of the antibacterial activity for secondary metabolites of antibiotics derived from microorganisms by the inhibition zone method.

This Standard is applicable to the determination of antibacterial activity of secondary metabolites of antibiotics derived from microorganisms. Its clauses include terms and definitions; principle; laboratory biosafety requirements; reagents or materials; apparatus; operation procedures; calculation of the results; repeatability.

It was issued by the State Administration for Market Regulation on NOVEMBER 19, 2020 and took effect on NOVEMBER 19, 2020.

Found what you need?

Document preview — GB/T 38483-2020

National Standard of the People's Republic of China

ICS
07.080
Classification
A 21

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword3
  • 1 Scope4
  • 2 Normative References4
  • 3 Terms and Definitions4
  • 4 Principle5
  • 5 Laboratory Biosafety Requirements5
  • 6 Reagents or Materials5
  • 7 Apparatus5
  • 8 Operation Procedures6
  • 9 Calculation of the Results7
  • 10 Repeatability8

1 Scope

This Standard specifies the method for determination of the antibacterial activity for secondary metabolites of antibiotics derived from microorganisms by the inhibition zone method.

This Standard is applicable to the determination of antibacterial activity of secondary metabolites of antibiotics derived from microorganisms.

2 Normative References

The following documents are essential to the application of this document. For the dated documents, only the versions with the dates indicated are applicable to this document; for the undated documents, only the latest version (including all the amendments) is applicable to this document.

GB/T 6682 Water for Analytical Laboratory Use - Specification and Test Methods

GB 19489 Laboratories - General Requirements for Biosafety

3 Terms and Definitions

For the purpose of this document, the following terms and definitions apply.

3.1 Median inhibitory concentration; IC50

The concentration at which the inhibition rate of bacteria reaches 50%.

3.2 Antibacterial activity

The ability to inhibit the growth and reproduction of bacteria.

3.3 Inhibition zone

The circular zone of aseptic propagation at the boundary between the surface of the solid medium and the specimen.

7.4 Inhibition zone measuring instrument

accuracy of 0.1mm.

7.5 Spectrophotometer

detection wavelength of 600nm.

7.6 Sterile conical flask

capacity of 100mL and 250mL.

7.7 Sterile pipette

1mL (with a scale of 0.01mL), 10mL (with a scale of 0.1mL) or a micropipette.

8 Operation Procedures

8.1 Strain activation

The strain was inoculated into a test tube containing 2mL of LB liquid medium; and incubate at 37°C±1°C for 12h~18h. Use an inoculating loop to pick the bacterial suspension and inoculate it on the LB solid plate by streaking; incubate in a constant temperature incubator at 37°C±1°C for 18h~24h; and then pick a single colony from the plate and inoculate it in the slope of the LB solid medium test tube; incubate in a constant temperature incubator at 37°C±1°C for 18h~24h; then store the inclined surface of the test tube in a refrigerator at 1°C~4°C as preservation bacteria. The storage period is no more than one month, and the passage shall be carried out once per month. The number of passages shall not exceed 10 generations.

8.2 Preparation of bacterial suspension

8.2.1 Use an inoculating loop to take the preservation bacteria; inoculate them on the

LB solid plate by streaking; and incubate at 37°C ± 1°C for 24h.

NOTE: LB solid plates are stored at 1°C~4°C and used within 1 week.

8.2.2 Take 20mL of LB liquid medium and add it to a sterile conical flask with a capacity of 100mL. Use an inoculating loop to take a single colony on the plate in 8.2.1 and inoculate it in the LB liquid medium. Incubate at 37°C±1°C for 12h~18h.

8.2.3 The bacteria concentration adjusted the incubated by LB liquid medium to 1×10

8

CFU/mL~5×10

8

CFU/mL and use this as the test bacteria suspension. Use a spectrophotometer to determine the OD 600 of the test bacteria suspension to be

0.5~0.65 or (other) appropriate methods to determine the concentration of the bacteria suspension.

NOTE: The test bacteria suspension is stored at 1°C~4°C and shall be used within 4h.

8.3 Preparation of tested samples

The polar sample is directly dissolved in water (the non-polar sample is fully dissolved by adding a certain concentration of surfactant); prepare it into a certain concentration

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download GB/T 38483-2020

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 38483-2020

$85.00