GB/T 38461-2020Blow mould for PET bottle in food field (English PDF)
食品包装用PET瓶吹瓶成型模具
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 38461-2020 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
March 6, 2020
Implementation date
October 1, 2020
Scope
GB/T 38461-2020 is the English-translated version of 食品包装用PET瓶吹瓶成型模具.
GB/T 38461-2020 is the Chinese standard "Blow mould for PET bottle in food field".
Its scope clause reads: This standard specifies the terms, definitions, models and types of polyethylene terephthalate (PET) bottle blow molding molds for food packaging Type, basic parameters and working conditions, technical requirements, test methods, inspection rules, signs, packaging, transportation and storage.
This standard is applicable to blow molding molds (hereinafter referred to as "molds") for PET bottles for food (beverages, alcohol, condiments, etc.) packaging. day Chemical, pharmaceutical and other industries can refer to use. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 38461-2020
National Standard of the People's Republic of China
- ICS
- 55.200
- Classification
- J 83
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Mold cavity mouldcavity
- 3.2 Base mould
1 Scope
This standard specifies the terms, definitions, models and types of polyethylene terephthalate (PET) bottle blow molding molds for food packaging
Type, basic parameters and working conditions, technical requirements, test methods, inspection rules, signs, packaging, transportation and storage.
This standard is applicable to blow molding molds (hereinafter referred to as "molds") for PET bottles for food (beverages, alcohol, condiments, etc.) packaging. day
Chemical, pharmaceutical and other industries can refer to use.
2 Normative references
The following documents are essential for the application of this document. For dated references, only the dated version applies to this article
Pieces. For the cited documents without date, the latest version (including all amendments) applies to this document.
GB/T 3 common thread finishing, shoulder distance, undercut and chamfer
GB/T 191 Graphic mark for packaging, storage and transportation
GB/T 196 basic dimensions of ordinary thread
GB/T 197 General thread tolerance
GB/T 1184-1996 Tolerances for shape and position tolerances are not noted
GB/T 1804-2000 General tolerance Tolerance of linear and angular dimensions without tolerance
GB/T 2828.1 Counting sampling inspection procedures Part 1. Sampling plan for batch-by-batch inspection retrieved by acceptance quality limit (AQL)
GB/T 5226.1 Mechanical electrical safety Mechanical electrical equipment Part 1. General technical conditions
GB/T 6403.4 Rounding and chamfering of parts
GB/T 7311 Packaging machinery classification and model compilation method
GB/T 9969 General Instructions for Use of Industrial Products
GB/T 13277.1-2008 Compressed air Part 1. Pollutant purification grade
GB/T 13384 General technical requirements for packaging of electromechanical products
GB/T 14253 General technical requirements for light industry machinery
GB 16798 Food Machinery Safety and Sanitation
GB/T 17931 Polyethylene terephthalate (PET) resin for bottles
GB/T 19891 Machinery Safety Hygienic requirements for machine design
QB/T 2357 Polyester (PET) sparkling beverage bottle
3 Terms and definitions
The following terms and definitions apply to this document.
3.1 Mold cavity mouldcavity
Mold parts for forming PET bottle body.
3.2 Base mould
Mold parts for forming the bottom of PET bottles.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 38461-2020
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 38461-2020
$165.00