GB/T 38329.1-2019Utility connection in port -- Part 1: High voltage shore connection (HVSC) system -- General requirements (English PDF)

Foreword

GB/T 38329 `` Port Ship to Shore Connection '' is intended to be divided into the following parts.

--- Part 1. General requirements for high-voltage shore power connection (HVSC) systems;

--- Part 2. Data transmission for monitoring and control of high-voltage and low-voltage shore power connection systems;

This part is the first part of GB/T 38329.

This section is drafted in accordance with the rules given in GB/T 1.1-2009.

This section uses the translation method equivalently to IEC /ISO /IEEE80005-1..2012 "Port Ship to Shore Connection Part 1. High Voltage Shore Power Connection

Interface (HVSC) system general requirements.

The Chinese documents that have a consistent correspondence with the international documents referenced normatively in the standard are as follows.

--- GB/T 1094.1-2013 Power transformers Part 1. General (IEC 60076-1..2011, MOD);

--- GB/T 1094.2-2013 Power transformers Part 2. Temperature rise of liquid-immersed transformers (IEC 60076-2..2011,

MOD);

--- GB/T 1094.3-2017 Power transformers Part 3. Insulation level, insulation test and external insulation air gap

(IEC 60076-3..2013, MOD);

--- GB/T 1094.4-2005 Power transformers Part 4. Lightning and operating shocks of power transformers and reactors

Test guidelines (IEC 60076-4..2002, MOD);

--- GB/T 1094.5-2008 Power transformers Part 5. Ability to withstand short circuits (IEC 60076-5..2006, MOD);

--- GB/T 1094.6-2011 Power transformers Part 6. Reactors (IEC 60076-6..2007, MOD);

--- GB/T 1094.7-2008 Power transformers Part 7. Load guidelines for oil-immersed power transformers (IEC 60076-7.

2005, MOD);

--- GB/T 1094.10-2003 Power transformers Part 10. Determination of sound level (IEC 60076-10..2001, MOD);

--- GB/T 1094.11-2007 Power transformers Part 11. Dry-type transformers (IEC 60076-11..2004, MOD);

--- GB/T 1094.12-2013 Power transformers Part 12. Load guidelines for dry-type power transformers (IEC 60076-12.

2008, MOD);

--- GB /Z 1094.14-2011 Power transformers Part 14. Design and design of liquid-immersed transformers using high-temperature insulation materials

Application (IEC /T S60076-14..2009, IDT);

--- GB/T 1094.16-2013 Power transformers Part 16. Transformers for wind power generation (IEC 60076-16..2011,

MOD);

--- GB/T 1094.18-2016 Power transformer Part 18. Frequency response measurement (IEC 60076-18..2012, MOD);

--- GB/T 1094.101-2008 Power transformers Part 10.1. Application guidelines for sound level determination (IEC 60076-10-1.

2005, IDT);

--- GB 3836.1-2010 Explosive environment Part 1. General requirements for equipment (IEC 60079-0..2007, MOD);

--- GB 3836.2-2010 Explosive atmospheres Part 2. Equipment protected by flameproof enclosure "d" (IEC 60079-1..2007,

MOD);

--- GB 3836.3-2010 Explosive atmospheres Part 3. Equipment protected by increased safety "e" (IEC 60079-7..2006,

IDT);

--- GB 3836.4-2010 Explosive atmospheres Part 4. Equipment protected by intrinsically safe "i" (IEC 60079-11.

2006, MOD);

--- GB/T 3836.5-2017 Explosive atmospheres Part 5. Equipment protected by positive pressure housing "p" (IEC 60079-2.

2007, MOD);

--- GB/T 3836.6-2017 Explosive atmospheres Part 6. Equipment protected by liquid immersion type "o" (IEC 60079-6..2015,

MOD);

--- GB/T 3836.7-2017 Explosive atmospheres Part 7. Equipment protected by sand-filled "q" (IEC 60079-5..2015,

MOD);

--- GB 3836.8-2014 Explosive atmosphere Part 8. Equipment protected by "n" (IEC 60079-15..2010, MOD);

--- GB 3836.9-2014 Explosive atmospheres Part 9. Equipment protected by potting type "m" (IEC 60079-18..2009,

MOD);

--- GB/T 3836.11-2017 Explosive atmospheres Part 11. Test methods and numbers for classification of gas and vapor substance properties

According to (IEC 60079-20-1..2010, IDT);

--- GB 3836.13-2013 Explosive environment Part 13. Repair, overhaul, repair and modification of equipment (IEC 60079-19.

2010, MOD);

--- GB 3836.14-2014 Explosive atmospheres Part 14. Classification of places explosive atmospheres (IEC 60079-10-1.

2008, IDT);

--- GB/T 3836.15-2017 Explosive atmospheres Part 15. Design, selection and installation of electrical devices (IEC 60079-

14 .2007, MOD);

--- GB/T 3836.16-2017 Explosive atmospheres Part 16. Inspection and maintenance of electrical installations (IEC 60079-17.

2007, IDT);

--- GB 3836.17-2007 Electrical equipment for explosive gas atmospheres-Part 17. Structure and application of positive pressure rooms or buildings

Use (IEC 60079-13. 1982, MOD);

--- GB/T 3836.18-2017 Explosive atmospheres Part 18. Intrinsically safe electrical systems (IEC 60079-25..2010,

MOD);

--- GB 3836.19-2010 Explosive atmospheres Part 19. Fieldbus Intrinsic Safety Concept (FISCO) (IEC 60079-

27 .2008, IDT);

--- GB 3836.20-2010 Explosive atmospheres Part 20. Equipment with protection level (EPL) Ga

(IEC 60079-26..2006, IDT);

--- GB/T 3836.22-2017 Explosive environment Part 22. Protective measures for optical radiation equipment and transmission systems

(IEC 60079-28..2006, MOD);

--- GB/T 3836.24-2017 Explosive atmospheres Part 24. Equipment protected by special type "s" (IEC 60079-33.

2012, MOD);

--- GB/T 5332-2007 Test method for ignition temperature of flammable liquids and gases (IEC 60079-4. 1975, IDT);

--- GB/T 6994-2006 Ship electrical equipment definition and general regulations (IEC 60092-101..2002, IDT);

--- GB/T 12476.3-2017 Electrical equipment for flammable dust environment Part 3. The presence or potential of flammable dust

Location Classification (IEC 60079-10-2..2009 Explosiveatmospheres-Part 10-2. Classificationof

areas-Explosivedustatmospheres, MOD);

--- GB/T 13499-2002 Power transformer application guidelines (idtIEC 60076-8..1997 Powertransformers-Ap-

plicationguide);

--- GB/T 18380.12-2008 Burning test of electric and optical cables under flame conditions-Part 12. Single insulated wire

Cable flame vertical propagation test 1kW pre-mixed flame test method (IEC 60332-1-2..2004, IDT);

--- GB/T 19518.1-2017 Resistive heaters for explosive atmospheres Part 1. General and test requirements (IEC 60079-

30-1..2007, MOD);

--- GB/T 19518.2-2017 Resistive heaters for explosive atmospheres Part 2. Guidelines for design, installation and maintenance

(IEC 60079-30-2..2007, MOD);

--- GB/T 20936.1-2017 Gas detectors for explosive atmospheres Part 1. Performance requirements for combustible gas detectors

(IEC 60079-29-1..2007, MOD);

--- GB/T 20936.2-2017 Gas detectors for explosive atmospheres Part 2. Selection of combustible gas and oxygen detectors

Type, installation, use and maintenance (IEC 60079-29-2..2007, MOD);

--- GB/T 20936.3-2017 Gas detectors for explosive atmospheres Part 3. Functional safety of fixed gas detection systems

Guidelines (IEC 60079-29-3..2014, MOD);

--- GB/T 20936.4-2017 Gas detectors for explosive environments Part 4. Performance of open path combustible gas detectors

Requirements (IEC 60079-29-4..2009, MOD);

--- GB/T 22189-2008 Special cargo tanker for ship electrical equipment (IEC 60092-502..1999, IDT);

--- GB/T 28561-2012 Marine electrical equipment special control and measuring instruments (IEC 60092-504..2001, IDT).

This part is proposed and managed by the National Marine Electrical and Electronic Equipment Standardization Technical Committee (SAC/TC531).

This section was drafted by. China Academy of Marine Technology & Economy, Jiangsu Xinhang Electric Co., Ltd.

Institute, Wuhan University of Technology, China Shipbuilding Industry Corporation 704, China Shipbuilding Industry Corporation 714.

1 Scope

This section specifies the relevant requirements for onboard and onshore high-voltage shore power connection (HVSC) systems and systems for transmitting electricity from shore to ships.

Claim.

This section applies to the design, installation and testing of HVSC systems and the following equipment within the system.

* High-voltage shore power distribution system;

* Shore ship connection and interface equipment;

* Transformer/Reactor;

* Semiconductor/rotary converter;

* Shipboard power distribution system;

* Control, monitoring, interlocking and energy management systems (PMS).

This system is not suitable for power supply when docked, such as maintenance and repair when entering the dry dock and when the ship is not operating.

Relevant national agencies, the competent authority in charge of ship operations, the shipowner or the department responsible for shore power supply or distribution systems may add additional or alternative

Generation requirements.

HVSC system can be applied to ships of 1MW and above or ships with high voltage power supply.

This section does not cover low-voltage shore power connection systems.

2 Normative references

The following documents are essential for the application of this document. For dated references, only the dated version applies to this article

Pieces. For undated references, the latest version (including all amendments) applies to this document.

GB 5226.3-2005 Safety of machinery. Mechanical and electrical equipment. Part 11. Voltages above 1000Va.c. Or 1500Vd.c.

Technical conditions of high-voltage equipment not exceeding 36kV (IEC 60204-11..2000, IDT)

GB/T 7358-1998 Ship electrical equipment-Part.201. General rules for system design (IEC 60092-201..1994, IDT)

GB/T 29484-2013 Ship electrical equipment-Part 503. AC voltage above 1kV to no more than 15kV

Power supply system (IEC 60092-503..2007, IDT)

IEC 60034 (all parts) Rotating electrical machines

IEC 60076 (all parts) Power transformers

IEC 60079 (all parts) Electrical equipment for explosive gas atmospheres (Electricalapparatusforexplosivegasat-

mospheres)

IEC 60092-101..2002 Electrical Equipment for Ships Part 101. Definitions and General Provisions

ships-Part 101. Definitionsandgeneralrequirements)

IEC 60092-301..1995 Marine electrical equipment-Part 301. Equipment generators and motors (Electrical

instalationsinships-Part 301. Equipment-Generatorsandmotors)

IEC 60092-502..1999 Marine Electrical Equipment Special Tanker (Electricalinstalationsinships-Part 502.

Tankers-Specialfeatures)

IEC 60092-504..2001 Marine electrical equipment control and measuring instruments (Electricalinstalationinships-

Part 504. Specialfeatures-Controlandinstrumentation)