GB/T 38217-2019Societal security - Guidelines for establishing partnering arrangements (English PDF)

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009.

This standard uses the translation method equivalent to ISO 22397.2014 "Guidelines for Establishing Cooperation Agreements for Public Safety".

This standard makes the following editorial changes to ISO 22397.2014 "Guidelines for Establishing Cooperation Agreements for Public Safety".

--- Translating "partnering" in ISO 22397.2014 into "cooperation";

--- "References" replaced the ISO 22397 with the domestic document GB/T 27921-2011 "risk management risk assessment technology".

International document IEC 31010, Risk Management Risk Assessment Techniques in the.2014 References.

This standard is proposed and managed by the National Public Safety Basic Standardization Technical Committee (SAC/TC351).

This standard was drafted. State Grid Shandong Electric Power Company, China National Institute of Standardization, Beijing Kedi Zhibiao Information Technology Co., Ltd., Xianheng

International Technology Co., Ltd., Beijing Urban System Engineering Research Center, China Academy of Safety Production Science, Beijing Safety Production Science

Institute of Technology, Central South University, Jiangsu Institute of Quality and Standardization, Tsinghua University, Institute of Military Sciences, Institute of Chemical Research, Shenzhen City

Ying Information Technology Co., Ltd.

Introduction

The world today has evolved into an interdependent global community. Advances in technology and the evolution of economic relations lead to social management functions

And public resources are gradually showing the characteristics of cross-regional and cross-border. People's sense of security and well-being for organizations, local communities, countries and even the whole

The dependence of the core functional continuity of the ball community is increasing. In addition, the grim situation of public safety has led to the prevention of various types of emergencies in society.

Monitoring, disposal and recovery have placed higher demands.

Governments, social organizations and citizens play different roles in safeguarding public safety, and effective cooperation among them can increase

The efficiency of responding to incidents is therefore imperative to establish cooperative agreements to regulate cooperative behavior.

The term "organization" as used in this standard refers to the government, social organizations and citizens involved in dealing with public security incidents, and "collaborators" refers to cooperation.

The agreed parties.

This standard is intended to provide principles and procedures for establishing a cooperation agreement. Figure 1 shows the cooperation agreement from planning, development, implementation to review.

process.

Figure 1 The process of planning, formulating, implementing and reviewing the cooperation agreement

Cooperation agreements can improve the organization's ability to prevent, prepare, respond to, and recover from emergencies, while also resisting emergencies to the organization itself.

And the potential impact of the environment. There are many forms of cooperation agreements, both formal and informal. For example. contracts, memos, mutual

Assistance agreements, cooperation agreements, coordination agreements, operating agreements, supply agreements, etc.

The implementation of this standard shall also comply with the relevant laws, regulations and rules, and it is recommended that the organization consult legal professionals before establishing a cooperation agreement.

Guide to establishing a cooperative agreement on public safety

1 Scope

This standard provides guidance to organizations in establishing collaborative agreements and helps address various relationships in public safety events. This standard

The quasi-medium stipulates the basic principles for establishing a cooperation agreement and the processes for planning, formulation, implementation, and review.

This standard applies to the establishment of cooperative relationships within and between governments, social organizations and citizens, and does not limit the type and size of organizations.

And nature.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.

Pieces. For undated references, the latest edition (including all amendments) applies to this document.

ISO 22300 Public Safety Terminology (Societalsecurity-Terminology)

ISO 31000.2009 Risk Management Principles and Guidelines (Riskmanagement-Principlesandguidelines)

3 Terms and definitions

The following terms and definitions defined by ISO 22300 apply to this document.

3.1

Collaborative interoperability

The ability to work together between different systems and organizations.

3.2

Partnering

Collaboration with other organizations in an activity or area of mutual interest for individual or collective purposes.

4 Plan cooperation agreement