Valid

GB/T 38114-2019Nanotechnologies—Quantitative analysis of the surface oxygen functional groups on graphene materials—Chemical titration method (English PDF)

纳米技术 石墨烯材料表面含氧官能团的定量分析 化学滴定法

Preview PDF

This is a limited preview

Buy now to download the full PDF (17 pages)

Need quotation for your management?

Get a formal quotation for GB/T 38114-2019 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

October 18, 2019

Implementation date

September 1, 2020

Scope

GB/T 38114-2019 is the English-translated version of 纳米技术 石墨烯材料表面含氧官能团的定量分析 化学滴定法.

GB/T 38114-2019 is the Chinese standard "Nanotechnologies—Quantitative analysis of the surface oxygen functional groups on graphene materials—Chemical titration method".

Its scope clause reads: This standard specifies the summary of methods, reagents, instruments, and methods for the quantitative analysis of oxygen-containing functional groups on the surface of graphene powder materials by chemical titration.

Measurement procedures, results calculation and presentation, and test reports. This standard is applicable to the determination of graphene powder materials.The detection limit of carboxyl, lactone, phenolic hydroxyl and carbonyl groups on the surface of graphene materials.

They are 0.015 mmol/g, 0.037 mmol/g, 0.014 mmol/g, 0.072 mmol/g. This standard does not apply to sulfonated graphene materials. For the quantitative analysis of the oxygen-containing functional group content of other carbon materials, please refer to this standard get on. Its clauses include terms and definitions.

Found what you need?

Document preview — GB/T 38114-2019

National Standard of the People's Republic of China

ICS
71.040
Classification
A 20

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword III
  • Introduction IV
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Method Overview
  • 5 Reagent
  • 6 Instrument
  • 7 Measurement step
  • 7.1 Sample preparation
  • 7.2 Reaction of sample with lye
  • 7.3 Titration
  • 8 Results calculation and representation
  • 8.1 Alkali consumption
  • 8.2 Content of oxygen-containing functional groups
  • 9 Test report
  • Appendix A (informative) Test procedure example
  • Appendix B (informative) Example of data record and test report
  • Appendix C (Informative) Test Example

1 Scope

This standard specifies the summary of methods, reagents, instruments, and methods for the quantitative analysis of oxygen-containing functional groups on the surface of graphene powder materials by chemical titration.

Measurement procedures, results calculation and presentation, and test reports.

This standard is applicable to the determination of graphene powder materials.The detection limit of carboxyl, lactone, phenolic hydroxyl and carbonyl groups on the surface of graphene materials.

They are 0.015 mmol/g, 0.037 mmol/g, 0.014 mmol/g, 0.072 mmol/g.

This standard does not apply to sulfonated graphene materials. For the quantitative analysis of the oxygen-containing functional group content of other carbon materials, please refer to this standard get on.

2 Normative references

The following documents are essential for the application of this document. For dated references, only the dated version applies to this article

Pieces. For undated references, the latest version (including all amendments) applies to this document.

Preparation of GB/T 601 chemical reagent standard titration solution

GB/T 6682-2008 Analytical laboratory water specifications and test methods

3 terms and definitions

The following terms and definitions apply to this document.

3.1 Graphene

Graphene layer

Single-layergraphene; monolayergraphene

A single layer of carbon atoms formed by combining one carbon atom with three surrounding carbon atoms to form a honeycomb structure.

Note 1. It is an important building block for many carbon nano-objects.

Note 2. Because graphene has only one layer, it is usually called single-layer graphene. Graphene is abbreviated as 1LG to distinguish it from double-layer graphite abbreviated as 2LG

And a few layers of graphene abbreviated FLG.

Note 3. Graphene has boundaries, and there are defects and grain boundaries where the carbon-carbon bonds are broken.

[GB/T 30544.13-2018, definition 3.1.2.1]

3.2 Graphene material

Two-dimensional materials and their derivatives made of graphene alone or stacked with no more than 10 layers.

Note 1. Graphene materials include single-layer graphene, double-layer graphene, and multi-layer graphene.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 17 pages — is available in the English PDF.

Similar standards

How to Download GB/T 38114-2019

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
17 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 38114-2019

$325.00