Valid

GB/T 38021-2019Analogue quartz clocks - Timing accuracy (English PDF)

指针式石英钟 走时精度

Preview PDF

This is a limited preview

Buy now to download the full PDF (17 pages)

Need quotation for your management?

Get a formal quotation for GB/T 38021-2019 in 30 minutes.

Issued by

State Administration for Market Regulation, China National Standardization Administration

Level / Type

National · Recommended

Issue date

August 30, 2019

Implementation date

March 1, 2020

Scope

GB/T 38021-2019 is the English-translated version of 指针式石英钟 走时精度.

GB/T 38021-2019 — This standard specifies the basic parameters, requirements and test methods for the accuracy of the walking time of the quartz clock (hereinafter referred to as "quartz clock").

This standard is applicable to the quartz quartz clock and wall clock with crystal frequency of 32768Hz and nominal voltage of DC1.5V. The bell heart can also be used as reference.

This standard does not apply to the following quartz clocks. ---Special use of the clock on aircraft, ships, vehicles and other equipment; ---The clock matched with other products; --- Radio clock.

Found what you need?

Document preview — GB/T 38021-2019

National Standard of the People's Republic of China

ICS
39.040.20
Classification
Y 11

Issued by: State Administration for Market Regulation, China National Standardization Administration

Contents

  • Foreword
  • 1 Scope
  • 2 Terms and definitions
  • 3 Basic parameters and requirements for travel time accuracy
  • 3.1 Average instantaneous difference 􀭿m
  • 3.2 Voltage coefficient CU

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009.

This standard uses the translation method equivalent to ISO 19235.2015 "pointer type quartz clock travel time accuracy".

This standard was proposed by the China Light Industry Association.

This standard is under the jurisdiction of the National Clock Standardization Technical Committee (SAC/TC160).

This standard was drafted. Shenzhen Jinbawang Precision Electronics Co., Ltd., Shenzhen Titan Clock Technology Co., Ltd., Xi'an Light Industry Clock

Table Research Co., Ltd., Yantai Polaris State-owned Holdings Co., Ltd., Shengzhou Hengli Electronics Co., Ltd., Changzhou Jingke Industrial Co., Ltd.

Fujian Shangrun Precision Instrument Co., Ltd., Fujian Shengbang Electronic Technology Co., Ltd., Guangzhou Fuda Watch Industry Co., Ltd., Fujian Ruida

Seiko Co., Ltd., Fujian Jibang Electronics Co., Ltd., Yantai Long-lasting Watch Group Co., Ltd.

1 Scope

This standard specifies the basic parameters, requirements and test methods for the accuracy of the walking time of the quartz clock (hereinafter referred to as "quartz clock").

This standard is applicable to the quartz quartz clock and wall clock with crystal frequency of 32768Hz and nominal voltage of DC1.5V.

The bell heart can also be used as reference.

This standard does not apply to the following quartz clocks.

---Special use of the clock on aircraft, ships, vehicles and other equipment;

---The clock matched with other products;

--- Radio clock.

2 Terms and definitions

The following terms and definitions apply to this document.

2.1

Average instantaneous difference melaninstantaneousrate

􀭿m

The arithmetic mean of the three instantaneous differences of the quartz clocks tested in consecutive 3d, in units of "s/d" or "s/month".

2.2

Voltage coefficient

CU

The rate of change of the instantaneous difference in the quartz clock due to changes in the supply voltage.

2.3

Temperature coefficient

Ct

The rate of change of the instantaneous difference in the quartz clock due to temperature changes.

2.4

Nominal voltage nominalvoltage

Un

The voltage identified by the movement.

3 Basic parameters and requirements for travel time accuracy

3.1 Average instantaneous difference 􀭿m

After the quartz clock is continuously transported for 3 days, the average instantaneous difference should be in the range of -1.0 s/d to 1.0 s/d.

3.2 Voltage coefficient CU

The voltage coefficient CU should be in the range of -1.0 s/(d . V) ~ 1.0 s/(d . V).

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 17 pages — is available in the English PDF.

How to Download GB/T 38021-2019

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
17 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 38021-2019

$145.00