GB/T 38004-2019Spectacle frames - Measuring system and terminology (English PDF)
眼镜架 测量系统和术语
This is a limited preview
Buy now to download the full PDF (20 pages)
Need quotation for your management?
Get a formal quotation for GB/T 38004-2019 in 30 minutes.
Issued by
State Administration for Market Regulation, China National Standardization Administration
Level / Type
National · Recommended
Issue date
August 30, 2019
Implementation date
March 1, 2020
Scope
GB/T 38004-2019 is the English-translated version of 眼镜架 测量系统和术语.
GB/T 38004-2019 is the Chinese national standard on the measuring system and terminology of spectacle frames, a translation identical with ISO 8624:2011 that also takes in its Amendment 1:2015.
It defines the measuring system of the spectacle frame and the terms that go with it, among them the boxed centre, the horizontal and the vertical boxed lens size, the boxed centre distance and the distance between lenses, each one referred to the rectangle drawn tangent to the lens shape, with notes on frames of marked curvature; Annex A carries the complete list of terms and definitions.
It applies to frames whose front is symmetrical. It was issued on 30 August 2019 and has applied since 1 March 2020.
Found what you need?
Document preview — GB/T 38004-2019
National Standard of the People's Republic of China
- ICS
- 11.040.70
- Classification
- Y 89
Issued by: State Administration for Market Regulation, China National Standardization Administration
Contents
- Foreword
- 1 Scope
- 2 Terms, definitions and symbols
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard uses the translation method equivalent to ISO 8624:2011 "Ophthalmic optical frames measurement methods and terminology". This standard has made the following editorial changes.
--- In order to adapt to China's technical standards system, the standard name was changed to "glasses frame measurement system and terminology";
--- Incorporating the International Standard Amendment Amd.1.2015, the terms of the amendment have been passed in the margins of the outer side of the margin The vertical double line (||) is marked.
1 Scope
This standard defines the measurement system and related terms of the spectacle frame.
This standard applies to the front frame symmetrical frame.
2 Terms, definitions and symbols
The following terms, definitions, and symbols apply to this document. See Appendix A for complete terms and definitions.
2.1 Box method center boxedcentre
The intersection of the horizontal centerline of the rectangular frame and the vertical centerline of the lens shape. see picture 1.
2.2 Box method lens horizontal size
Lens horizontal size horizontalallenssize The distance between the two vertical sides of a rectangular frame that is tangent to the shape of the lens. see picture 1.
Note: If the frame has a significant mirror circle curvature, measure the horizontal size of the lens according to the plane shape of the lens.
2.3 Box method lens vertical size
Lens vertical size verticallenssize The shape of the lens is tangent to the distance between the two horizontal edges of the rectangular frame. see picture 1.
2.4 Box method center distance
The distance between the center of the box method of the left and right lenses. see picture 1.
Note: For the frame with a sharp curvature on the mirror ring, mark the center of the box of the lens with the appropriate base curve on the frame, and then measure the mark on the back surface of the left and right lenses. The distance between them. See Figure 4.
2.5 Inter-chip distance
The left and right lens shapes are tangent to the horizontal distance between the rectangular sides of the rectangular frame on the nose side.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 20 pages — is available in the English PDF.
Referenced standards
Cited by
How to Download GB/T 38004-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 38004-2019
$205.00