Valid

GB/T 38001.62-2020Flexible display devices - Part 6-2: Environmental testing methods (English PDF)

柔性显示器件 第6-2部分:环境试验方法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 38001.62-2020 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

April 28, 2020

Implementation date

November 1, 2020

Scope

GB/T 38001.62-2020 is the English-translated version of 柔性显示器件 第6-2部分:环境试验方法.

GB/T 38001.62-2020 is the Chinese standard "Flexible display devices - Part 6-2: Environmental testing methods".

Its scope clause reads: This part of GB/T 38001 provides that under the specified conditions of use, storage and transportation, the evaluation includes liquid crystal display (LCD), electronic Test methods for environmental adaptability of flexible display devices including paper (EPD) and organic light-emitting diode displays (OLED).

This section applies to flexible displays including liquid crystal displays (LCD), electronic paper (EPD) and organic light-emitting diode displays (OLED) Device.

Its clauses include terms and definitions; test system equipment; standard atmospheric conditions.

Found what you need?

Document preview — GB/T 38001.62-2020

National Standard of the People's Republic of China

ICS
31.120
Classification
L 47

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword I
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Test system equipment
  • 5 Standard atmospheric conditions
  • 5.1 Base standard atmospheric conditions
  • 5.2 Standard atmospheric conditions for arbitration measurement and testing
  • 5.3 Standard atmospheric conditions for measurement and testing
  • 5.4 Recovery condition
  • 5.5 Standard drying conditions
  • 5.6 Working conditions
  • 5.7 Standard flexible display test status
  • 6 Measurement and analysis
  • 7 Environmental Test Method
  • 7.1 General
  • 7.2 High temperature storage
  • 7.3 Low temperature storage
  • 7.4 Temperature change (storage)
  • 7.5 Damp heat in steady state (storage)
  • 7.6 Circulating damp heat (storage)
  • 7.7 High temperature operation
  • 7.8 Low temperature operation
  • 7.9 Constant damp heat (working)

1 Scope

This part of GB/T 38001 provides that under the specified conditions of use, storage and transportation, the evaluation includes liquid crystal display (LCD), electronic

Test methods for environmental adaptability of flexible display devices including paper (EPD) and organic light-emitting diode displays (OLED).

This section applies to flexible displays including liquid crystal displays (LCD), electronic paper (EPD) and organic light-emitting diode displays (OLED)

Device.

2 Normative references

The following documents are essential for the application of this document. For dated references, only the dated version applies to this article

Pieces. For the cited documents without date, the latest version (including all amendments) applies to this document.

GB/T 2421.1-2008 Overview and guidelines for environmental testing of electrical and electronic products

GB/T 2423.1-2008 Environmental testing for electrical and electronic products Part 2. Test methods Test A. Low temperature

GB/T 2423.2-2008 Environmental testing for electrical and electronic products Part 2. Test methods Test B. High temperature

GB/T 2423.3-2016 Environmental Test Part 2. Test Method Test Cab. Constant Damp Heat Test

GB/T 2423.4-2008 Environmental testing for electrical and electronic products Part 2. Test methods Test Db. Alternating damp heat (12h

12h cycle)

GB/T 2423.22-2012 Environmental Test Part 2. Test Method Test N. Temperature Change

GB/T 38001.11-2020 Flexible display devices Part 1-1. Terms and text symbols

3 Terms and definitions

The terms and definitions defined in GB/T 38001.11-2020 and GB/T 2421.1-2008 apply to this document.

4 Test system equipment

When applicable, the test system equipment and working conditions will be specified in the test of each test item in detail.

5 Standard atmospheric conditions

5.1 Base standard atmospheric conditions

The reference standard atmospheric conditions are as follows.

a) Temperature. 20 °C;

b) Atmospheric pressure. 101.3kPa.

Note. Because the relative humidity cannot be corrected by calculation, it is not specified.

If the measured parameter changes with temperature and/or air pressure, and the change law is known, it should be measured according to the conditions specified in 5.3

The parameter value is then corrected to the above-mentioned reference standard atmospheric parameter value by calculation.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 38001.62-2020

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 38001.62-2020

$165.00