GB/T 37803-2019Integrated management measures for pests of plants for planting (English PDF)
种植用植物有害生物综合管理措施
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 37803-2019 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
August 30, 2019
Implementation date
March 1, 2020
Scope
GB/T 37803-2019 is the English-translated version of 种植用植物有害生物综合管理措施.
GB/T 37803-2019 is the Chinese standard "Integrated management measures for pests of plants for planting". Its scope clause reads: This standard establishes the requirements, approval, and supervision of the implementation of pest management measures in the production process of planting plants (excluding seeds).
General principles for the issuance of supervision, quarantine certificates, non-compliance with notifications, verification, etc. This standard is applicable to the management of integrated pest management measures in the production process of planting plants. Its clauses include terms and definitions; background.
Found what you need?
Document preview — GB/T 37803-2019
National Standard of the People's Republic of China
- ICS
- 65.020.01
- Classification
- B 16
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 background
- 5 Requirements Overview
- 6 Requirements
- 6.1 Basis for the development of comprehensive management measures
- 6.2 General Integrated Management Measures
- 6.3 Supplementary integrated management measures for high-risk pests
- 6.4 The place of production does not meet
- 6.6 Responsibilities of China's national (or importing) phytosanitary agencies
- Appendix A (Normative) Factors affecting the risk of plant pests
- Appendix B (informative appendix) Examples of prevention and control measures to reduce pest risk in production sites
- Appendix C (informative appendix) The place of production does not conform to the example
1 Scope
This standard establishes the requirements, approval, and supervision of the implementation of pest management measures in the production process of planting plants (excluding seeds).
General principles for the issuance of supervision, quarantine certificates, non-compliance with notifications, verification, etc.
This standard is applicable to the management of integrated pest management measures in the production process of planting plants.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 20478 phytosanitary terminology
GB/T 21760 Guidelines for Phytosanitary Certificates
GB/T 23630 Guidelines for Entry Plant Quarantine Management System
GB/T 27615 Pest Reporting Guide
International Standards for Phytosanitary Measures (ISPM) No. 13 Standards for Violation and Urgent Actions (Guidelinesfortheno-
Tificationofnon-complianceandemergencyaction)
International Standards for Phytosanitary Measures (ISPM) No. 24 Standards for the Confirmation and Recognition of Standards for Phytosanitary Measures (Guidelinesforthedeterminationandrecognitionofequivalenceofphytosanitarymeasures)
International Standards for Phytosanitary Measures (ISPM) No. 32. Commodity classification based on pest risk (Categorizationof
Commoditiesaccordingtotheirpestrisk)
3 Terms and definitions
The terms and definitions defined in GB/T 20478 apply to this document.
4 background
Planting plants are the host of transmission of harmful organisms, and the risk of carrying harmful organisms is higher than other restrictions. For entry or domestic transfers
When planting plants for on-site inspection, it is difficult to find pests due to the following conditions, so comprehensive management measures are required.
Implement pest management to ensure that the planting plants that are imported or domestically transported meet the phytosanitary requirements of China.
--- Some pests do not cause visible symptoms, especially if they occur in small quantities.
--- At the time of on-site inspection, the symptoms are in the incubation period or the symptoms are covered up (such as due to the use of pesticides, nutritional imbalance, delivery when planting
The object is in a dormant period, the presence of other non-quarantine pests, the leaves with symptoms are removed, etc.).
--- Small insects or eggs are hidden under the scales or bark of plant buds.
--- The packaging type, specifications and physical conditions of the goods affect the inspection results.
--- Many pests, especially pathogens, may lack detection methods.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 37803-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 37803-2019
$235.00