Valid

GB/T 37793-2019Quantitative analysis of dendritic segregation in steel billets (English PDF)

钢坯枝晶偏析的定量分析方法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 37793-2019 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

August 30, 2019

Implementation date

July 1, 2020

Scope

GB/T 37793-2019 is the English-translated version of 钢坯枝晶偏析的定量分析方法.

GB/T 37793-2019 is the Chinese standard "Quantitative analysis of dendritic segregation in steel billets". Its scope clause reads: This standard specifies the detection conditions, standard selection and operation steps for quantitative analysis of dendritic segregation of steel bills using an electronic probe analyzer.

Steps, data processing and test reports. This standard applies to steel billets with dendritic segregation element content above 0.01% (mass fraction). Ingots, castings, steel, etc. can also be referred to use. Its clauses include terms and definitions.

Found what you need?

Document preview — GB/T 37793-2019

National Standard of the People's Republic of China

ICS
77.040.99
Classification
H 24

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 3.1 Dendritic segregation
  • 3.2 Surface analysis
  • 3.3 Line analysis

1 Scope

This standard specifies the detection conditions, standard selection and operation steps for quantitative analysis of dendritic segregation of steel bills using an electronic probe analyzer.

Steps, data processing and test reports.

This standard applies to steel billets with dendritic segregation element content above 0.01% (mass fraction). Ingots, castings, steel, etc. can also be referred to use.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.

Pieces. For undated references, the latest edition (including all amendments) applies to this document.

GB/T 4930 Microbeam Analysis Electron Probe Analysis Standard Sample Technical Conditions Guide

GB/T 13298 metal microstructure inspection method

GB/T 15074 General rules for quantitative analysis of electron probes

GB/T 15616 metal and alloy electron probe quantitative analysis method

Quantitative analysis method of electron probe for low content Si and Mn in GB/T 17360 steel

GB/T 21636 Microbeam Analysis Electron Probe Microanalysis (EPMA) Terminology

GB/T 32055-2015 Microbeam analysis electron probe microscopic analysis spectroscopy elemental surface analysis

JJF1059.1 Measurement Uncertainty Evaluation and Representation

JJG901-1995 Electron Probe Analyzer

3 Terms and definitions

The following terms and definitions as defined in GB/T 21636 apply to this document.

3.1 Dendritic segregation

When the solid solution alloy is grown in a dendritic manner, there is a difference in composition between the first crystallized branch and the post-crystallized branch.

3.2 Surface analysis

Adjusting the spectroscopic crystal of the electron probe analyzer to the position of the characteristic X-ray wavelength of the element to be tested, using electron beam scanning or sample stage

The movement method causes the electron beam to move linearly in the X and Y directions with respect to the sample, and records the change in the intensity of the X-ray to obtain the concentration of the element.

Cloth image.

3.3 Line analysis

Adjusting the spectroscopic crystal of the electron probe analyzer to the position of the characteristic X-ray wavelength of the element to be tested, using electron beam scanning or sample stage

The moving mode causes the electron beam to move linearly with respect to the sample in a specified direction, and records the change of the X-ray intensity to obtain the concentration change of the element.

Curve.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 37793-2019

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 37793-2019

$205.00