GB/T 37762-2019General specification for synchronous condenser unit protection equipment (English PDF)
同步调相机组保护装置通用技术条件
This is a limited preview
Buy now to download the full PDF (17 pages)
Need quotation for your management?
Get a formal quotation for GB/T 37762-2019 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
June 4, 2019
Implementation date
January 1, 2020
Scope
GB/T 37762-2019 is the English-translated version of 同步调相机组保护装置通用技术条件.
GB/T 37762-2019 is the Chinese standard "General specification for synchronous condenser unit protection equipment". Its scope clause reads: This standard specifies the technical requirements, test methods, inspection rules and signs, packaging, transportation and storage of the synchronous camera set relay protection device.
Deposit requirements. This standard is applicable to relay protection devices (hereinafter referred to as devices) with a single camera capacity of 100 MVar and above.
The protection of the camera, main transformer and excitation transformer is the basis for the design, manufacture, test and operation of such devices. Other capacity modulation The unit protection device can be referred to for execution. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 37762-2019
National Standard of the People's Republic of China
- ICS
- 29.240.01
- Classification
- K 45
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 Technical requirements
- 4.1 Environmental conditions
- 4.2 Rated electrical parameters
- 4.3 Power consumption
- 4.4 Overload capability
- 4.5 Functional Requirements
- 4.6 Insulation requirements
- 4.7 Moisture and heat resistance
- 4.8 Electromagnetic Compatibility Requirements
- 4.9 DC Power Supply Impact
- 4.10 Static Simulation, Dynamic Simulation
- 4.11 Continuous power on
- 4.12 Mechanical properties
- 4.13 Structure, appearance and other
- 4.14 Security Requirements
- 5 Test method
- 5.1 Test conditions
- 5.2 Temperature influence test
- 5.3 Storage and transportation environment temperature test
- 5.4 Power Consumption Test
- 5.5 Overload capability test
- 5.6 Insulation test
- 5.7 Damp heat test
- 5.8 Electromagnetic compatibility performance test
- 5.9 DC power supply impact test
- 5.10 Static Simulation and Performance Test
- 5.11 Dynamic Simulation Test
- 5.12 Continuous power-on test
- 5.13 Mechanical performance test
- 5.14 Structural and visual inspection
- 5.15 Safety requirements test
- 6 Inspection rules
- 6.1 Inspection classification
- 6.2 Factory test
- 6.3 Type test
- 7 Marking, packaging, transportation and storage
- 7.1 Mark
- 7.2 Packing
- 7.3 Transportation
- 7.4 Storage
- 8 other
1 Scope
This standard specifies the technical requirements, test methods, inspection rules and signs, packaging, transportation and storage of the synchronous camera set relay protection device.
Deposit requirements.
This standard is applicable to relay protection devices (hereinafter referred to as devices) with a single camera capacity of 100 MVar and above.
The protection of the camera, main transformer and excitation transformer is the basis for the design, manufacture, test and operation of such devices. Other capacity modulation
The unit protection device can be referred to for execution.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 191 packaging storage and transportation icon
GB/T 2887-2011 General specification for computer sites
GB/T 2900.17 Electrotechnical terminology measuring relay
GB/T 2900.49 Electrotechnical terminology power system protection
GB/T 7261-2016 Basic test method for relay protection and safety automatic devices
GB/T 7268-2015 Power system protection and its automation device plug box and plug-in panel basic size series
GB/T 9361-2011 Computer Site Safety Requirements
GB/T 11287-2000 Electrical relays - Part 21. Vibrations, shocks, collisions and earthquakes of measuring relays and protection devices
Test Part 1. Vibration test (sinusoidal)
GB/T 14285-2006 Technical regulations for relay protection and safety automatic devices
GB/T 14537-1993 Impact and crash test of measuring relays and protection devices
GB/T 14598.26-2015 measuring relays and protection devices - Part 26. Electromagnetic compatibility
GB/T 14598.27-2017 Measuring relays and protective devices - Part 27. Product safety requirements
GB/T 17626.9-2011 Electromagnetic compatibility test and measurement technology Pulse magnetic field immunity test
GB/T 17626.10-2017 Electromagnetic compatibility test and measurement technique Damping oscillating magnetic field immunity test
GB/T 26864-2011 Power system relay protection product dynamic model test
DL/T 478-2013 General technical conditions for relay protection and safety automatic devices
DL/T 667 Remote Control Equipment and Systems - Part 5. Transmission Protocol, Part 103. Standards for relay protection equipment information interface
DL/T 860 (all parts) Power automation communication networks and systems
3 Terms and definitions
The following terms and definitions as defined in GB/T 2900.17 and GB/T 2900.49 apply to this document.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 17 pages — is available in the English PDF.
Similar standards
How to Download GB/T 37762-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 37762-2019
$295.00