GB/T 37761-2019Technical requirements of PLC control device of power transformer cooling system (English PDF)
电力变压器冷却系统PLC控制装置技术要求
This is a limited preview
Buy now to download the full PDF (17 pages)
Need quotation for your management?
Get a formal quotation for GB/T 37761-2019 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
June 4, 2019
Implementation date
January 1, 2020
Scope
GB/T 37761-2019 is the English-translated version of 电力变压器冷却系统PLC控制装置技术要求.
GB/T 37761-2019 is the Chinese standard "Technical requirements of PLC control device of power transformer cooling system".
Its scope clause reads: This standard specifies the technical requirements, test methods and inspection rules for the PLC control device (hereinafter referred to as the device) of the power transformer cooling system, and signs, packaging, transportation, storage and quality assurance.
This standard is applicable to transformer cooling circuit control equipment adopting natural oil circulation air cooling, forced oil circulation air cooling, forced oil circulating water cooling.
As the basis for the design, manufacture, testing and acceptance of this type of device. The high voltage shunt reactor cooling system control device can be referred to for execution. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 37761-2019
National Standard of the People's Republic of China
- ICS
- 29.240.01
- Classification
- K 45
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 Technical requirements
- 4.1 Environmental conditions
- 4.2 Appearance and structural requirements
- 4.3 Device working power supply
- 4.4 Overload capability
- 4.5 Power consumption
- 4.6 Functional Requirements
- 4.7 Hardware Requirements
- 4.8 Power Supply Impact
- 4.9 Insulation performance requirements
- 4.10 Clearance and creepage distance
- 4.11 Climate Environment Adaptability Requirements
- 4.12 Mechanical properties
- 4.13 Electromagnetic Compatibility Requirements
- 4.14 Continuous power requirement
- 4.15 Security Requirements
- 5 Test method
- 5.1 Test conditions
- 5.2 Appearance test
- 5.3 Overload capability test
- 5.4 Power Consumption Test
- 5.5 Device function test
- 5.6 Power Supply Variation Impact Test
- 5.7 Insulation performance test
- 5.8 Clearance and creepage distance test
- 5.9 Climate Environmental Impact Test
- 5.10 Mechanical performance test
- 5.11 Electromagnetic Compatibility Test
- 5.12 Continuous power-on test
- 5.13 Safety test
- 6 Inspection rules
- 6.1 General requirements
- 6.2 Type test
- 6.3 Type test qualification judgment
- 6.4 Factory test
- 7 Marking, packaging, transportation, storage and quality assurance
- 7.1 Mark
- 7.2 Packing
- 7.3 Transportation
- 7.4 Storage
- 7.5 Quality Assurance
1 Scope
This standard specifies the technical requirements, test methods and inspection rules for the PLC control device (hereinafter referred to as the device) of the power transformer cooling system.
And signs, packaging, transportation, storage and quality assurance.
This standard is applicable to transformer cooling circuit control equipment adopting natural oil circulation air cooling, forced oil circulation air cooling, forced oil circulating water cooling.
As the basis for the design, manufacture, testing and acceptance of this type of device. The high voltage shunt reactor cooling system control device can be referred to for execution.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 191 packaging storage and transportation icon
GB/T 2900.1 Basic terminology of electrical terminology
GB/T 2900.17 Electrotechnical terminology measuring relay
GB/T 2900.49 Electrotechnical terminology power system protection
GB/T 3797 electrical control equipment
GB/T 4208-2017 enclosure protection grade (IP code)
GB/T 7251.1-2013 Low-voltage switchgear and control equipment - Part 1. General
GB/T 7261-2016 Basic test method for relay protection and safety automatic devices
GB/T 11287-2000 Electrical relays - Part 21. Vibrations, shocks, collisions and earthquakes of measuring relays and protection devices
Test Part 1. Vibration test (sinusoidal)
GB/T 14537-1993 Impact and crash test of measuring relays and protection devices
GB/T 14598.2-2011 Measuring relays and protective devices - Part 1. General requirements
GB/T 14598.26-2015 measuring relays and protection devices - Part 26. Electromagnetic compatibility
GB/T 14598.27-2017 Measuring relays and protective devices - Part 27. Product safety requirements
GB/T 15969.3 Programmable controllers - Part 3. Programming languages
GB/T 17626.9-2011 Electromagnetic compatibility test and measurement technology Pulse magnetic field immunity test
GB/T 17626.10-2017 Electromagnetic compatibility test and measurement technique Damping oscillating magnetic field immunity test
GB/T 21711.1 Basic electromechanical relays - Part 1. General and safety requirements
DL/T 667 Remote Control Equipment and Systems - Part 5. Transmission Protocol, Part 103. Standards for relay protection equipment information interface
DL/T 860 (all parts) Power automation communication networks and systems
JB/T 5777.2-2002 General technical requirements for control and relay protection screens (cabinet and table) for secondary circuits of power systems
3 Terms and definitions
The following terms and definitions as defined in GB/T 2900.1, GB/T 2900.17, GB/T 2900.49 and GB/T 3797 apply to this file.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 17 pages — is available in the English PDF.
Similar standards
How to Download GB/T 37761-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 37761-2019
$295.00