GB/T 37665-2019Non-destructive testing for chemical compositions of ancient ceramics - PIXE analysis technique standards (English PDF)
古陶瓷化学组成无损检测 PIXE分析技术规范
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 37665-2019 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
June 4, 2019
Implementation date
June 4, 2019
Scope
GB/T 37665-2019 is the English-translated version of 古陶瓷化学组成无损检测 PIXE分析技术规范.
GB/T 37665-2019 is the Chinese standard "Non-destructive testing for chemical compositions of ancient ceramics - PIXE analysis technique standards". Its scope clause reads: This standard specifies the proton-excited X-ray fluorescence (PIXE) analysis technique during the nondestructive testing of ancient ceramics.
Claim. This standard applies to the non-destructive testing of the composition of ancient ceramic chemical elements. Its clauses include principle; equipment; sample processing.
Found what you need?
Document preview — GB/T 37665-2019
National Standard of the People's Republic of China
- ICS
- 03.080.99
- Classification
- A 10
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Principle
- 3 Equipment
- 4 sample processing
- 5 Measurement and Analysis
- 6 Test report
- Appendix A (informative) PIXE analysis test report for non-destructive testing of ancient ceramic chemical composition
1 Scope
This standard specifies the proton-excited X-ray fluorescence (PIXE) analysis technique during the nondestructive testing of ancient ceramics.
Claim.
This standard applies to the non-destructive testing of the composition of ancient ceramic chemical elements.
2 Principle
The sample is bombarded with a proton beam accelerated by an accelerator, so that atoms in the substance to be tested are excited and ionized, and when the inner shell layer is formed,
When the layer is filled with electrons, characteristic X-rays are emitted, and the energy and intensity of the characteristic X-rays are detected to determine the type of elements in the sample and content.
3 equipment
3.1 Accelerator
Accelerators that provide 1.5MeV to 4.0MeV collimated proton beams, such as single-stage electrostatic accelerators or tandem accelerators.
3.2 Sample stage
A sample "positioning" device should be set up - the sample stage. The sample stage can be divided into the following two ways.
--- Closed. a certain volume of vacuum target chamber, the sample to be tested is placed in the target chamber, the sample size is limited by the geometry of the target chamber;
--- Open type. using the outer beam test, the sample to be tested is placed at the leading end of the proton beam. For example. collimation proton beaming obtained by an accelerator
The 7.5 µm Kapton membrane is introduced into the atmosphere and continues to pass through the air layer to reach the sample to be tested. The advantage of this method is that the sample to be tested
The geometry of the product is not limited, and it is convenient to change the sample.
3.3 X-ray measurement system
In the PIXE measurement system, the detector's 5.87 keV Kalpha ray should have an energy resolution of less than 150 eV to ensure exploration.
Measure accuracy. The thickness of the detector window should be 7.5µm~12µm to ensure that the energy of the detector for Na is 1.041keV.
The ray has sufficient detection efficiency.
When using a closed target chamber, vacuum test should be carried out, and the vacuum should be below 10-4Pa.
When using the external beam PIXE method, helium should be filled between the sample target and the detector window to reduce the low energy X of air emission to the sample.
Absorption of radiation, otherwise the test system will be insensitive to the detection of elements Na and Mg or the measurement error is too large.
4 sample processing
4.1 Reagents and materials
4.1.1 Absolute ethanol
used to clean the surface of the sample.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 37665-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 37665-2019
$145.00