GB/T 37656-2019Maritime navigation and radiocommunication equipment and systems - VHF radiotelephone equipment incorporating Class D Digital Selective Calling (DSC) - Methods of testing and required test results (English PDF)
海上导航和无线电通信设备及系统 D级数字选择性呼叫(DSC)甚高频(VHF)无线电话 测试方法及要求的测试结果
This is a limited preview
Buy now to download the full PDF (98 pages)
Need quotation for your management?
Get a formal quotation for GB/T 37656-2019 in 30 minutes.
Issued by
State Administration for Market Regulation, China National Standardization Administration
Level / Type
National · Recommended
Issue date
June 4, 2019
Implementation date
January 1, 2020
Scope
GB/T 37656-2019 is the English-translated version of 海上导航和无线电通信设备及系统 D级数字选择性呼叫(DSC)甚高频(VHF)无线电话 测试方法及要求的测试结果.
GB/T 37656-2019 is the Chinese standard "Maritime navigation and radiocommunication equipment and systems - VHF radiotelephone equipment incorporating Class D Digital Selective Calling (DSC) - Methods of testing and required test results".
Its scope clause reads: This standard specifies general communication for shipboard fixed equipment using Class D digital selective calling (DSC) Very High Frequency (VHF) radiotelephones.
Basic requirements. These requirements contain and incorporate the relevant provisions of the ITU Radio Regulations and Recommendation ITU-RM.493-10 defining Class D equipment.
Relevant guidelines detailed in resolutions IMOMSC/Circ.803, MSC/Circ.862 and MSC.131(75). This standard also specifies the technical characteristics, test methods and test results of the equipment and system.
Appendix D describes the recommended standards for working equipment in a strong electromagnetic environment.
Found what you need?
Document preview — GB/T 37656-2019
National Standard of the People's Republic of China
- ICS
- 47.020.70
- Classification
- U 66
Issued by: State Administration for Market Regulation, China National Standardization Administration
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions, abbreviations
- 3.1 Terms and Definitions
- 3.2 Abbreviations
- 4 General and operational requirements
- 4.1 General
- 4.2 Composition
- 4.3 Structure
- 4.4 Control unit and indicator
- 4.5 DSC call encoding and decoding device
- 4.6 DSC display
- 4.7 Handle talker and speaker
- 4.8 Security measures
- 4.9 Mark
- 4.10 Preheating
- 5 Technical requirements
- 5.1 Conversion time
- 5.2 Transmission category and modulation characteristics
- 5.3 DSC transmitting and receiving functions
- 5.4 Ship Identification - MMSI and MMSI Group
- 5.5 Input of position information
- 5.6 Incoming call alarm
- 5.7 Multi-value function
- 5.8 Internal Detection
- 6 General conditions of measurement
- 6.1 Test signal settings used at the receiver input
- 6.2 Squelch
- 6.3 Conventional Modulation Test
- 6.4 Simulation antenna
- 6.5 Test signal setting used at the transmitter input
- 6.6 Test Channel
- 6.7 Generation and inspection of digital selective calling signals
- 6.8 DSC standard test signal
- 6.9 Determination of the bit error rate of the receiving part of the output
- 6.10 Measurement uncertainty and measurement results description
- 6.11 Test conditions, power supply and ambient temperature
- 6.12 Normal test conditions
- 6.13 Limit test conditions
- 6.14 Test procedure at extreme temperature
- 7 Environmental Test
- 7.1 Overview
- 7.2 Step
- 7.3 Performance Check
- 7.4 Vibration test
- 7.5 Temperature test
- 8 transmitter
- 8.1 Frequency error
- 8.2 Carrier Power
- 8.3 frequency offset
- 8.4 Modulator sensitivity, including microphone
- 8.5 Audio Response
- 8.6 Transmitted audio harmonic distortion
- 8.7 Adjacent channel power
- 8.8 Conducted spurious emissions transmitted to the antenna
- 8.9 Transient frequency change of the transmitter
- 8.10 Residual Modulation of the Transmitter
- 8.11 Frequency difference (DSC signal)
- 8.12 DSC Modulation Index
- 8.13 DSC Modulation Rate
- 8.14 Generating Call Sequence Test
- 9 radiotelephone receiver
- 9.1 Harmonic Distortion and Rated Audio Output Power
- 9.2 Audio Response
- 9.3 Maximum available sensitivity
- 9.4 Same channel suppression
- 9.5 Adjacent channel selection rate
- 9.6 spurious response suppression
- 9.7 Intermodulation response
- 9.8 Blocking or desensitization
- 9.9 spurious emissions
- 9.10 Receiver residual noise level
- 9.11 Squelch operation
- 9.12 suppression lag
- 9.13 Multi-attribute feature
- 10 DSC decoder receiver
- 10.1 Maximum Available Sensitivity
- 10.2 Same channel suppression
- 10.3 Adjacent channel selection rate
- 10.4 Spurious response and anti-blocking
- 10.5 Intermodulation response
- 10.6 Dynamic Range
- 10.7 Spurious emission
- 10.8 Correct Decoding Verification of Different Types of DSC Calls
- 10.9 VTS and AIS Channel Management DSC Transmission Response
- 10.10 Synchronous Reception
- 11 Electromagnetic Compatibility
1 Scope
This standard specifies general communication for shipboard fixed equipment using Class D digital selective calling (DSC) Very High Frequency (VHF) radiotelephones.
Basic requirements.
These requirements contain and incorporate the relevant provisions of the ITU Radio Regulations and Recommendation ITU-RM.493-10 defining Class D equipment.
Relevant guidelines detailed in resolutions IMOMSC/Circ.803, MSC/Circ.862 and MSC.131(75).
This standard also specifies the technical characteristics, test methods and test results of the equipment and system.
Appendix D describes the recommended standards for working equipment in a strong electromagnetic environment.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
IEC 60945 maritime navigation and radiocommunication equipment and systems generally require test methods and test results (Maritimenavigationandradiocommunicationequipmentandsystems-Generalrequirements-Meth-
Odsoftestingandrequiredtestrusults)
Maritime navigation and radiocommunication equipment and systems - Digital interface - Part 1. Single and multi-speakers (Maritimenavigationandradiocommunicationequipmentandsystems-Digitalinterfaces-Part 1.
Singletalkerandmultiplelisteners)
IMOMSC.131(75).2002 SOLAS ships on the sea maintain continuous monitoring on VHF channel 16 and in non-SOLAS Installation of VHF digital selective calling equipment on board (MaintenanceofacontinuouslisteningwatchonVHFchannel
16bySOLASshipswhilstatseaandinstalationofVHFDSCfacilitiesonnon-SOLASships)
IMOMSC/Circ.803 Non-SOLAS ships participate in the Global Maritime Distress and Safety System [Participationofnon-SOLAS shipsintheGlobalMaritimeDistressandSafetySystem(GMDSS)]
IMOMSC/Circ.862 Some requirements for GMDSS equipment performance standards (Clarificationsofcertainrequirementsin
IMOperformancestandardsforGMDSSequipment)
ITU Radio Regulations Appendix S18.1998, Transmission Frequency Table for the 156 MHz to 174 MHz Band of the Maritime Mobile Service Station (Tableoftransmittingfrequenciesintheband156-174MHzforstationsinthemaritimemobile
Service)
Recommendation ITU-R.493-10 Digital selective calling system for use in the maritime mobile service (Digitalselective-calingsys-
Temforuseinthemaritimemobileservice)
Optional extension of the ITU-RM.821-1.1997 Recommendation for digital selective calling systems for the maritime mobile service (Optional
Expansionofthedigitalselective-calingsystemforuseinthemaritimemobileservice)
GB/T 18913 | GB/T 37661 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 98 pages — is available in the English PDF.
Referenced standards
Normative references
IEC 60945
How to Download GB/T 37656-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 37656-2019
$650.00