Valid

GB/T 37622-2019Hot rolled steel bar of fire resistant for the reinforcement of concrete (English PDF)

钢筋混凝土用热轧耐火钢筋

Preview PDF

This is a limited preview

Buy now to download the full PDF (17 pages)

Need quotation for your management?

Get a formal quotation for GB/T 37622-2019 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

June 4, 2019

Implementation date

May 1, 2020

Scope

GB/T 37622-2019 is the English-translated version of 钢筋混凝土用热轧耐火钢筋.

GB/T 37622-2019 is the Chinese standard "Hot Rolled Steel Bar of Fire Resistant for the Reinforcement of Concrete".

Its scope clause reads: This Standard specifies the classification, designation, ordering content, size, shape, weight and allowable deviation, technical requirements, test methods, inspection rules, package, marking and quality certificate, etc. of hot rolled steel bar of fire resistant for the reinforcement of concrete.

This Standard is applicable to the hot rolled plain bars of fire-resistant and hot rolled ribbed bars of fire-resistant (hereinafter referred to as steel bar).

Its clauses include terms and definitions; classification and designation; ordering content; size, shape, weight and allowable deviation; technical requirements; test methods; inspection rules; package, marking and quality certificate.

It was issued by the State Administration for Market Regulation on JUNE 04, 2019 and took effect on MAY 01, 2020.

Found what you need?

Document preview — GB/T 37622-2019

National Standard of the People's Republic of China

ICS: 77.140.60
Classification: H 44

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Foreword3
1 Scope4
2 Normative References4
3 Terms and Definitions6
4 Classification and Designation6
5 Ordering Content7
6 Size, Shape, Weight and Allowable Deviation7
7 Technical Requirements7
8 Test Methods10
9 Inspection Rules13
10 Package, Marking and Quality Certificate14
Appendix A (Normative) Characteristic-Value Inspection Rules15
Bibliography17

1 Scope

This Standard specifies the classification, designation, ordering content, size, shape, weight and allowable deviation, technical requirements, test methods, inspection rules, package, marking and quality certificate, etc. of hot rolled steel bar of fire resistant for the reinforcement of concrete.

This Standard is applicable to the hot rolled plain bars of fire-resistant and hot rolled ribbed bars of fire-resistant (hereinafter referred to as steel bar).

2 Normative References

The following documents are essential to the application of this document. For the dated documents, only the versions with the dates indicated are applicable to this document; for the undated documents, only the latest version (including all the amendments) are applicable to this document.

GB/T 222 Permissible Tolerances for Chemical Composition of Steel Products

GB/T 223.5 Steel and Iron - Determination of Acid-Soluble Silicon and Total Silicon Content - Reduced Molybdosilicate Spectrophotometric Method

GB/T 223.11 Iron, Steel and Alloy - Determination of Chromium Content - Visual Titration or Potentiometric Titration Method

GB/T 223.12 Methods for Chemical Analysis of Iron, Steel and Alloy - The Sodium Carbonate Separation-Diphenyl Carbazide Photometric Method for the Determination of Chromium Content

GB/T 223.14 Methods for Chemical Analysis of Iron, Steel and Alloy - The N- Benzoy-N-Phenylhydroxylamine Extraction Photometric Method for the Determination of Vanadium Content

GB/T 223.19 Methods for Chemical Analysis of Iron, Steel and Alloy - The Neocuproine-Chloroform Extraction Photometric Method for the Determination of Copper Content

GB/T 223.23 Iron, Steel and Alloy - Determination of Nickel Content - The Dimethylglyoxime Spectrophotometric Method

GB/T 223.26 Iron, Steel and Alloy - Determination of Molybdenum Content - The Thiocyanate Spectrophotometric Method

GB/T 223.37 Methods for Chemical Analysis of Iron, Steel and Alloy - the Indophenol Blue Photometric Method for the Determination of Nitrogen Content after Distillation Separation

GB/T 223.40 Iron, Steel and Alloy - Determination of Niobium Content by the Sulphochlorophenol S Spectrophotometric Method

GB/T 223.59 Iron, Steel and Alloy - Determination of Phosphorus Content - Bismuth Phosphomolybdate Blue Spectrophotometric Method and Antimony Phosphomolybdate Blue Spectrophotometric Method

GB/T 223.63 Methods for Chemical Analysis of Iron, Steel and Alloy - The Sodium (Potassium) Periodate Photometric Method for the Determination of Manganese Content

GB/T 223.85 Iron, Steel and Alloy - Determination of Sulfur Content - Infrared Absorption Method after Combustion in an Induction Furnace

GB/T 223.86 Iron, Steel and Alloy - Determination of Total Carbon Content - Infrared Absorption Method after Combustion in an Induction Furnace

GB/T 228.2 Metallic Materials - Tensile Testing - Part 2: Method of Test at Elevated Temperature

GB/T 1499.1 Steel for the Reinforcement of Concrete - Part 1: Hot Rolled Plain Bars

GB/T 1499.2 Steel for the Reinforcement of Concrete - Part 2: Hot Rolled Ribbed Bars

GB/T 2101 General Requirement of Acceptance Packaging Marking and Certification for Section Steel

GB/T 4336 Carbon and Low-Alloy Steel - Determination of Multi-Element Contents -Spark Discharge Atomic Emission Spectrometric Method (Routine Method)

GB/T 17505 Steel and Steel Products - General Technical Delivery Requirements

GB/T 20066 Steel and Iron - Sampling and Preparation of Samples for the Determination of Chemical Composition

5 Ordering Content

The contract that orders products as per this Standard shall contain the following contents:

a) This Standard number;

b) Product name;

c) Designation of steel bar;

d) Nominal diameter, length and weight of steel bar (or quantity, or disc weight); e) Special requirements.

6 Size, Shape, Weight and Allowable Deviation

The size, shape, weight and allowable deviation of plain bars shall conform to the provisions of GB/T 1499.1; while the size, shape, weight and allowable deviation of ribbed bars shall conform to the provisions of GB/T 1499.2.

7 Technical Requirements

7.1 Smelting method

The steel shall be smelted in a converter or an electric arc furnace; and may be refining outside the furnace, if necessary.

7.2 Designation chemical composition

7.2.1 The designation, chemical composition and carbon equivalent (smelting analysis) of steel bars shall conform to the provisions of Table 2.

Designation Chemical composition (mass fraction) / % Carbon equivalent Ceq / % Welding Mechanical connection The rounding off and judgment for values of inspection results shall conform to the provisions of YB/T 081.

9 Inspection Rules

9.1 Inspection classification

The inspection of steel bar can be divided into characteristic-value inspection and delivery inspection.

9.2 Characteristic-value inspection

9.2.1 The Characteristic-value inspection is applicable to the following cases:

a) Supplier's inspection on the product quality control;

b) Inspection proposed by purchaser, and agreed between the supplier and the purchaser;

c) Inspection for the third-party product certification and arbitration.

9.2.2 The characteristic-value inspection shall be carried out as per the provisions of Appendix A.

9.3 Delivery inspection

9.3.1 Applicable cases

The delivery inspection is applicable to the inspection on the acceptance batch of steel bars.

9.3.2 Batching rules

The steel bars shall be inspected and accepted in batches. Each batch consists of the steel bars with the same designation, the same furnace-number, the same specification. The weight per batch is usually no greater than 60t. For the portion exceeding 60t, add a tensile test specimen and a bending test specimen for increasing per 40t (or remainder for less than 40t).

9.3.3 Inspection items and sampling quantity

The inspection items and sampling quantity of steel bars shall conform to the provisions of Table 6 and 9.3.2.

9.3.4 Inspection results

Appendix A (Normative) Characteristic-Value Inspection Rules

A.1 Test batches and sampling quantities

A.1.1 Test batches

For the benefit of test, the delivery shall be further divided into test batches. The batching rules shall conform to the provisions of 9.3.2.

A.1.2 Sampling quantities per batch

A.1.2.1 The chemical compositions (finished-product analysis) shall take two specimens from different pieces of steel bars.

A.1.2.2 The mechanical property test, and the like tests shall take 15 specimens from different pieces of steel bars (if 60 specimens are applicable, see provisions of A.2.1).

A.2 Assessment of test results

A.2.1 Parameter inspection

In order to inspect the specified properties, such as characteristic parameters ReL, Rm, Agt or A, the following parameters shall be determined:

a) All individual values of Xi (n=15) for 15 specimens;

b) Average value m15 (n=15);

c) Standard deviation S15 (n=15).

If all properties satisfy the conditions given in Formula (A.1), then such test batch meet the requirements.

Where: fk - the required characteristic-value;

2.33 - if n=15, 90% confidence level (1-a = 0.90), the unqualified rate 5% (P=0.95), then it indicates the value of acceptance coefficient k. […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 17 pages — is available in the English PDF.

Referenced standards

Normative references

GB/T 1499.1 · GB/T 1499.2

Similar standards

GB/T 26280-2026|GB/T 6480-2026|GB/T 702-2026|GB/T 14993-2025|GB/T 17107-2025|GB/T 24238-2025

How to Download GB/T 37622-2019

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.