Valid

GB/T 37548-2019Requirements of communication architecture and interface for substation equipments IOT (English PDF)

变电站设备物联网通信架构及接口要求

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 37548-2019 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

June 4, 2019

Implementation date

January 1, 2020

Scope

GB/T 37548-2019 is the English-translated version of 变电站设备物联网通信架构及接口要求.

GB/T 37548-2019 is the Chinese standard "Requirements of communication architecture and interface for substation equipments IOT". Its scope clause reads: This standard specifies the IoT architecture, communication architecture, sensing device communication interface, and security protection requirements for substation equipment.

This standard applies to IoT applications for substation primary equipment, auxiliary facilities and other equipment management.

Found what you need?

Document preview — GB/T 37548-2019

National Standard of the People's Republic of China

ICS
29.240.01
Classification
F 21

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 3 Terms and Definitions
  • 4 Abbreviations
  • 5 Substation equipment Internet of Things system
  • 5.1 Architecture
  • 5.2 Perception Layer
  • 5.3 Network Layer
  • 5.4 Application Layer
  • 5.5 Information Interaction
  • 6 Communication Architecture
  • 6.1 Overall Architecture
  • 6.2 I0 interface
  • 6.3 I1 interface
  • 6.4 I2 interface
  • 7 sensing device communication interface
  • 7.1 Physical Interface
  • 7.2 Communication Protocol
  • 8 Security
  • Appendix A (Normative Appendix) IoT Communication Architecture for Substation Equipment

1 Scope

This standard specifies the IoT architecture, communication architecture, sensing device communication interface, and security protection requirements for substation equipment.

This standard applies to IoT applications for substation primary equipment, auxiliary facilities and other equipment management.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.

Pieces. For undated references, the latest edition (including all amendments) applies to this document.

GB/T 6107-2000 Interface between data terminal equipment and data circuit terminating equipment using serial binary data exchange

GB/T 11014-1989 Electrical characteristics of balanced voltage digital interface circuits

GB/T 12057-1989 General use between data terminal equipment and data circuit terminating equipment using serial binary data exchange

37 pin and 9 pin connector

GB/T 19244 Information Technology High Performance Serial Bus

GB/T 19582 (all parts) Industrial automation network specification based on Modbus protocol

GB/T 20540.2 Measurement and control of digital data communication - Fieldbus type 3. PROFIBUS specification for industrial control systems

Part 2. Physical layer specifications and service definitions

GB/T 20540.3 Measurement and control of digital data communication - Industrial control systems - Fieldbus type 3. PROFIBUS specification

Part 3. Data Link Layer Service Definition

GB/T 20540.4 Measurement and control of digital data communication - Field control systems for industrial control systems 3. PROFIBUS specification

Part 4. Data Link Layer Protocol Specification

GB/T 26790 (all parts) Industrial Wireless Network WIA Specification

GB/T 29768 Information Technology Radio Frequency Identification 800/900MHz Air Interface Protocol

GB/T 29910 (all parts) Industrial Communication Network Fieldbus Specification Type 20. HART Specification

DL/T 634.5104 Sports equipment and systems - Part 5-104. Transmission protocol IEC 60870-

5-101 network access

DL/T 860 (all parts) Substation communication network and system

SJ/T 11349 2D barcode grid matrix code

SJ/T 11350 2D barcode tight matrix code

YD/T 1272 (all parts) Fiber Optic Active Connector

Power Protection System Security Protection Regulations (National Development and Reform Commission of the People's Republic of China [2014] Order No. 14)

IEC 60603-7-1 Connectors for electronic equipment - Part 7-1. 8-channel activity with s

Detailed specification for fixed and fixed shielded connectors (Connectorsforelectronicequipment-Part 7-1.Detailspecification

For8-way,shieldedfreeandfixedconnectorswithcomonmatingfeatures,withassessedquality)

IEC 60603-7-2 Connectors for electronic equipment - Part 7-2. 8-channel active for data transmission up to 100 MHz

And detailed specifications for fixed unshielded connectors (Connectorsforelectronicequipment-Part 7-2.Detailspecification

For8-way, unshieldedfreeandfixedconnectors, fordatatransmissions withfrequenciesupto […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 37548-2019

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 37548-2019

$205.00