GB/T 37482-2019Implementation guidance for energy management systems in aluminum electrolysis industry (English PDF)
电解铝行业能源管理体系实施指南
This is a limited preview
Buy now to download the full PDF (27 pages)
Need quotation for your management?
Get a formal quotation for GB/T 37482-2019 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
August 30, 2019
Implementation date
March 1, 2020
Scope
GB/T 37482-2019 is the English-translated version of 电解铝行业能源管理体系实施指南.
GB/T 37482-2019 is the Chinese standard "Implementation guidance for energy management systems in aluminum electrolysis industry". Its scope clause reads: This standard proposes systematic guidance for the establishment, implementation, maintenance and improvement of its energy management system for electrolytic aluminum enterprises.
Ability to scientifically and effectively establish, implement, maintain and improve energy management systems to ensure the achievement of their energy performance targets.
This standard applies to all types of electrolytic aluminum (excluding carbon and aluminum processing). Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 37482-2019
National Standard of the People's Republic of China
- ICS
- 27.010
- Classification
- F 01
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 Energy Management System
- 4.1 General requirements
- 4.2 Management responsibilities
- 4.3 Energy Policy
- 4.4 Planning
- 4.5 Implementation and operation
- 4.6 Check
- 4.7 Management Review
- Appendix A (informative appendix) Electrolytic aluminum production energy review case
- Appendix B (informative) Example of energy performance parameters
1 Scope
This standard proposes systematic guidance for the establishment, implementation, maintenance and improvement of its energy management system for electrolytic aluminum enterprises.
Ability to scientifically and effectively establish, implement, maintain and improve energy management systems to ensure the achievement of their energy performance targets.
This standard applies to all types of electrolytic aluminum (excluding carbon and aluminum processing).
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 2589 General rules for comprehensive energy consumption calculation
GB/T 7119 Water-saving Enterprise Evaluation Guidelines
GB/T 8175 Equipment and Pipeline Thermal Insulation Design Guidelines
GB/T 12452 Enterprise Water Balance Test General
GB/T 12497 three-phase asynchronous motor economic operation
GB/T 13234 energy consumption calculation method
GB/T 15316 Energy Conservation Monitoring Technology General
GB/T 15587 Energy Management Guidelines for Industrial Enterprises
GB/T 16664 Enterprise Power Supply and Distribution System Energy Saving Monitoring Method
GB/T 16665 air compressor unit and gas supply system energy saving monitoring
GB 17167 General rules for the provision and management of energy metering units
GB 18613 Small and medium-sized three-phase asynchronous motor energy efficiency limit value and energy efficiency rating
GB 19762 Clear water centrifugal pump energy efficiency limit value and energy saving evaluation value
GB .20052 three-phase distribution transformer energy efficiency limit value and energy efficiency rating
GB/T 20902 Non-ferrous metal smelting enterprises energy metering equipment provision and management requirements
GB 21346 Electrolytic aluminum enterprise unit product energy consumption limit
GB/T 23331-2012 Energy Management System Requirements
GB/T 24915 General Principles of Contract Energy Management Technology
GB/T 29456-2012 Energy Management System Implementation Guide
GB 29741 Aluminum Electrolysis Safety Production Specification
YS/T 480 Aluminum Cell Energy Balance Test and Calculation Method Four-point power input and two-point power pre-baked anode aluminum electrolytic cell
YS/T 481 Aluminum Cell Energy Balance Test and Calculation Method Five-point power input and six-point power pre-baked anode aluminum electrolytic cell
3 Terms and definitions
The terms and definitions defined in GB/T 23331-2012 apply to this document.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 27 pages — is available in the English PDF.
Similar standards
How to Download GB/T 37482-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 37482-2019
$475.00