Valid

GB/T 37124-2018Quality requirements for gases entering long-distance transportation gas pipeline (English PDF)

进入天然气长输管道的气体质量要求

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 37124-2018 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 28, 2018

Implementation date

July 1, 2019

Scope

GB/T 37124-2018 is the English-translated version of 进入天然气长输管道的气体质量要求.

GB/T 37124-2018 sets the quality requirements, test methods and inspection rules for gas entering long-distance natural gas transmission pipelines. It applies to treated natural gas, coalbed methane, shale gas, tight sandstone gas and coal-based synthetic natural gas carried in those pipelines.

Its normative references show the methods it relies on: gas chromatographic composition analysis, the determination of hydrogen sulfide and total sulfur, water dew point measurement and conversion from water content, particulate matter by weighing, and the calculation of calorific value, density and Wobbe index, together with sampling guidelines and the interchangeability requirements of GB/Z 33440. It was issued on 28 December 2018 and has applied since 1 July 2019.

Found what you need?

Document preview — GB/T 37124-2018

National Standard of the People's Republic of China

ICS
75.060
Classification
E 24

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009.

1 Scope

This standard specifies the quality requirements, test methods and inspection rules for gas entering long-distance gas pipelines.

This standard applies to treated natural gas, coalbed methane, shale gas, tight sandstone transported through long-distance natural gas pipelines. Gas and coal to synthesize natural gas.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this document. For undated references, the latest edition (including all amendments) applies to this document.

Gas chromatographic analysis of GB/T 10410 artificial gas and liquefied petroleum gas

Determination of sulfur compounds in natural gas - Part 1: Determination of hydrogen sulfide content by iodometric method

Determination of sulfur compounds in natural gas - Part 2: Determination of hydrogen sulfide content by methylene blue method

Natural gas -- Determination of sulfur compounds -- Part 3: Determination of sulphur Hydrogen content

Natural gas -- Determination of sulfur content -- Part 4: Determination of total sulfur content by oxidative microcoulometry

Natural gas -- Determination of sulfur content -- Part 5: Determination of total sulphur content

Natural gas -- Determination of sulfur content -- Part 8: Determination of total sulfur content by ultraviolet fluoro

Natural gas -- Determination of sulfur compounds -- Part 10: Determination of sulfur compounds by gas chromatography

GB/T 11062 Calculation method for calorific value, density, relative density and Wobbe index of natural gas

GB/T 13609 Natural Gas Sampling Guidelines

GB/T 13610 Natural gas composition analysis gas chromatography

GB/T 17283 Determination of natural gas water dew point Cooling mirror condensate hygrometer method

GB/T 20604 natural gas vocabulary

GB/T 22634 conversion between natural gas water content and water dew point

GB/T 27893 Determination of particulate matter content in natural gas - Weighing method

GB/T 27894 (all parts) Natural gas is determined by gas chromatography at a certain uncertainty

GB/T 30490 natural gas automatic sampling method

GB/Z 33440 entering the long-distance pipeline network natural gas interchangeability requirements

3 Terms and definitions

The following terms and definitions as defined in GB/T 20604 apply to this document.

3.1 Natural gas long-distance pipeline

Origin, gas storage, and use units are used to transport treated commodity natural gas (conventional natural gas, coalbed methane, shale gas, tight sandstone) Long-distance pipelines for gas and coal-based synthetic natural gas.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download GB/T 37124-2018

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Instant delivery (0–9 sec)

    Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Instant delivery (0–9 sec)
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 37124-2018

$85.00